[PATCHv3 3/4] clk: sunxi: Add A31 clocks support

Maxime Ripard maxime.ripard at free-electrons.com
Mon Aug 5 16:43:00 EDT 2013


The A31 has a mostly different clock set compared to the other older
SoCs currently supported in the Allwinner clock driver.

Add support for the basic useful clocks. The other ones will come in
eventually.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 Documentation/devicetree/bindings/clock/sunxi.txt  |   6 +
 .../bindings/clock/sunxi/sun6i-a31-gates.txt       |  83 ++++++++++++++
 drivers/clk/sunxi/clk-sunxi.c                      | 124 +++++++++++++++++++++
 3 files changed, 213 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index b24de10..c383d12 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible : shall be one of the following:
 	"allwinner,sun4i-osc-clk" - for a gatable oscillator
 	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
 	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-axi-clk" - for the AXI clock
 	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
@@ -15,6 +16,8 @@ Required properties:
 	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
+	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-apb0-clk" - for the APB0 clock
 	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
@@ -24,6 +27,9 @@ Required properties:
 	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
+	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
+	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
+	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
new file mode 100644
index 0000000..fe44932
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
@@ -0,0 +1,83 @@
+Gate clock outputs
+------------------
+
+  * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
+
+    MIPI DSI					1
+
+    SS						5
+    DMA						6
+
+    MMC0					8
+    MMC1					9
+    MMC2					10
+    MMC3					11
+
+    NAND1					12
+    NAND0					13
+    SDRAM					14
+
+    GMAC					17
+    TS						18
+    HSTIMER					19
+    SPI0					20
+    SPI1					21
+    SPI2					22
+    SPI3					23
+    USB_OTG					24
+
+    EHCI0					26
+    EHCI1					27
+
+    OHCI0					29
+    OHCI1					30
+    OHCI2					31
+    VE						32
+
+    LCD0					36
+    LCD1					37
+
+    CSI						40
+
+    HDMI					43
+    DE_BE0					44
+    DE_BE1					45
+    DE_FE1					46
+    DE_FE1					47
+
+    MP						50
+
+    GPU						52
+
+    DEU0					55
+    DEU1					56
+    DRC0					57
+    DRC1					58
+
+  * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
+
+    CODEC					0
+
+    DIGITAL MIC					4
+    PIO						5
+
+    DAUDIO0					12
+    DAUDIO1					13
+
+  * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+    I2C3					3
+
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+    UART4					20
+    UART5					21
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index cd07169..bd01a02 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -125,7 +125,89 @@ static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
 	*n = div / 4;
 }
 
+/**
+ * sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
+ * parent_rate should always be 24MHz
+ */
+static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
+				       u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	/*
+	 * We can operate only on MHz, this will make our life easier
+	 * later.
+	 */
+	u32 freq_mhz = *freq / 1000000;
+	u32 parent_freq_mhz = parent_rate / 1000000;
+
+	/*
+	 * Round down the frequency to the closest multiple of either
+	 * 6 or 16
+	 */
+	u32 round_freq_6 = round_down(freq_mhz, 6);
+	u32 round_freq_16 = round_down(freq_mhz, 16);
+
+	if (round_freq_6 > round_freq_16)
+		freq_mhz = round_freq_6;
+	else
+		freq_mhz = round_freq_16;
 
+	*freq = freq_mhz * 1000000;
+
+	/*
+	 * If the factors pointer are null, we were just called to
+	 * round down the frequency.
+	 * Exit.
+	 */
+	if (n == NULL)
+		return;
+
+	/* If the frequency is a multiple of 32 MHz, k is always 3 */
+	if (!(freq_mhz % 32))
+		*k = 3;
+	/* If the frequency is a multiple of 9 MHz, k is always 2 */
+	else if (!(freq_mhz % 9))
+		*k = 2;
+	/* If the frequency is a multiple of 8 MHz, k is always 1 */
+	else if (!(freq_mhz % 8))
+		*k = 1;
+	/* Otherwise, we don't use the k factor */
+	else
+		*k = 0;
+
+	/*
+	 * If the frequency is a multiple of 2 but not a multiple of
+	 * 3, m is 3. This is the first time we use 6 here, yet we
+	 * will use it on several other places.
+	 * We use this number because it's the lowest frequency we can
+	 * generate (with n = 0, k = 0, m = 3), so every other frequency
+	 * somehow relates to this frequency.
+	 */
+	if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
+		*m = 2;
+	/*
+	 * If the frequency is a multiple of 6MHz, but the factor is
+	 * odd, m will be 3
+	 */
+	else if ((freq_mhz / 6) & 1)
+		*m = 3;
+	/* Otherwise, we end up with m = 1 */
+	else
+		*m = 1;
+
+	/* Calculate n thanks to the above factors we already got */
+	*n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1;
+
+	/*
+	 * If n end up being outbound, and that we can still decrease
+	 * m, do it.
+	 */
+	if ((*n + 1) > 31 && (*m + 1) > 1) {
+		*n = (*n + 1) / 2 - 1;
+		*m = (*m + 1) / 2 - 1;
+	}
+}
 
 /**
  * sun4i_get_apb1_factors() - calculates m, p factors for APB1
@@ -190,6 +272,15 @@ static struct clk_factors_config sun4i_pll1_config = {
 	.pwidth = 2,
 };
 
+static struct clk_factors_config sun6i_a31_pll1_config = {
+	.nshift	= 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.mshift = 0,
+	.mwidth = 2,
+};
+
 static struct clk_factors_config sun4i_apb1_config = {
 	.mshift = 0,
 	.mwidth = 5,
@@ -202,6 +293,11 @@ static const __initconst struct factors_data sun4i_pll1_data = {
 	.getter = sun4i_get_pll1_factors,
 };
 
+static const __initconst struct factors_data sun6i_a31_pll1_data = {
+	.table = &sun6i_a31_pll1_config,
+	.getter = sun6i_a31_get_pll1_factors,
+};
+
 static const __initconst struct factors_data sun4i_apb1_data = {
 	.table = &sun4i_apb1_config,
 	.getter = sun4i_get_apb1_factors,
@@ -244,6 +340,10 @@ static const __initconst struct mux_data sun4i_cpu_mux_data = {
 	.shift = 16,
 };
 
+static const __initconst struct mux_data sun6i_a31_ahb1_mux_data = {
+	.shift = 12,
+};
+
 static const __initconst struct mux_data sun4i_apb1_mux_data = {
 	.shift = 24,
 };
@@ -302,6 +402,12 @@ static const __initconst struct div_data sun4i_apb0_data = {
 	.width	= 2,
 };
 
+static const __initconst struct div_data sun6i_a31_apb2_div_data = {
+	.shift	= 0,
+	.pow	= 0,
+	.width	= 4,
+};
+
 static void __init sunxi_divider_clk_setup(struct device_node *node,
 					   struct div_data *data)
 {
@@ -352,6 +458,10 @@ static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
 	.mask = {0x107067e7, 0x185111},
 };
 
+static const __initconst struct gates_data sun6i_a31_ahb1_gates_data = {
+	.mask = {0xEDFE7F62, 0x794F931},
+};
+
 static const __initconst struct gates_data sun4i_apb0_gates_data = {
 	.mask = {0x4EF},
 };
@@ -376,6 +486,14 @@ static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
 	.mask = {0xa0007},
 };
 
+static const __initconst struct gates_data sun6i_a31_apb1_gates_data = {
+	.mask = {0x3031},
+};
+
+static const __initconst struct gates_data sun6i_a31_apb2_gates_data = {
+	.mask = {0x3F000F},
+};
+
 static void __init sunxi_gates_clk_setup(struct device_node *node,
 					 struct gates_data *data)
 {
@@ -428,6 +546,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
 /* Matches for factors clocks */
 static const __initconst struct of_device_id clk_factors_match[] = {
 	{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
+	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
 	{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
 	{}
 };
@@ -437,6 +556,7 @@ static const __initconst struct of_device_id clk_div_match[] = {
 	{.compatible = "allwinner,sun4i-axi-clk", .data = &sun4i_axi_data,},
 	{.compatible = "allwinner,sun4i-ahb-clk", .data = &sun4i_ahb_data,},
 	{.compatible = "allwinner,sun4i-apb0-clk", .data = &sun4i_apb0_data,},
+	{.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,},
 	{}
 };
 
@@ -444,6 +564,7 @@ static const __initconst struct of_device_id clk_div_match[] = {
 static const __initconst struct of_device_id clk_mux_match[] = {
 	{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
 	{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
+	{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
 	{}
 };
 
@@ -453,12 +574,15 @@ static const __initconst struct of_device_id clk_gates_match[] = {
 	{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
+	{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
 	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
 	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
 	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
+	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
+	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
 	{}
 };
 
-- 
1.8.3.4




More information about the linux-arm-kernel mailing list