[PATCH 7/8] ARM: at91/dt: use periph id macros for at91sam9x5 interrupt definitions
Boris BREZILLON
b.brezillon at overkiz.com
Thu Aug 1 03:00:02 EDT 2013
This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91sam9x5/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 63 +++++++++++++++++++------------------
1 file changed, 32 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 57d45f5..e65c780 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91sam9x5/peripherals.h>
/ {
model = "Atmel AT91SAM9x5 family SoC";
@@ -67,7 +68,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <31>;
+ atmel,external-irqs = <AT91SAM9X5_ID_IRQ0>;
};
ramc0: ramc at ffffe800 {
@@ -93,32 +94,32 @@
pit: timer at fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
};
tcb0: timer at f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>;
};
tcb1: timer at f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_TCB IRQ_TYPE_LEVEL_HIGH 0>;
};
dma0: dma-controller at ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_DMA0 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
dma1: dma-controller at ffffee00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffee00 0x200>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_DMA1 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
@@ -498,7 +499,7 @@
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9X5_ID_PIOAB IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -508,7 +509,7 @@
pioB: gpio at fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9X5_ID_PIOAB IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
#gpio-lines = <19>;
@@ -519,7 +520,7 @@
pioC: gpio at fffff800 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9X5_ID_PIOCD IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -529,7 +530,7 @@
pioD: gpio at fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9X5_ID_PIOCD IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
#gpio-lines = <22>;
@@ -541,7 +542,7 @@
ssc0: ssc at f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
- interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_SSC IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -550,7 +551,7 @@
mmc0: mmc at f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_MCI0 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -561,7 +562,7 @@
mmc1: mmc at f000c000 {
compatible = "atmel,hsmci";
reg = <0xf000c000 0x600>;
- interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_MCI1 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -572,7 +573,7 @@
dbgu: serial at fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -581,7 +582,7 @@
usart0: serial at f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x200>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_USART0 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -590,7 +591,7 @@
usart1: serial at f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x200>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_USART1 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -599,7 +600,7 @@
usart2: serial at f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x200>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_USART2 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
@@ -608,7 +609,7 @@
macb0: ethernet at f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9X5_ID_EMAC0 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
status = "disabled";
@@ -617,14 +618,14 @@
macb1: ethernet at f8030000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
- interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9X5_ID_EMAC1 IRQ_TYPE_LEVEL_HIGH 3>;
status = "disabled";
};
i2c0: i2c at f8010000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9X5_ID_TWI0 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
<&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
@@ -638,7 +639,7 @@
i2c1: i2c at f8014000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9X5_ID_TWI1 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
<&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
dma-names = "tx", "rx";
@@ -652,7 +653,7 @@
i2c2: i2c at f8018000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8018000 0x100>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9X5_ID_TWI2 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
<&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
@@ -666,7 +667,7 @@
uart0: serial at f8040000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8040000 0x200>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_UART0 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
@@ -675,7 +676,7 @@
uart1: serial at f8044000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8044000 0x200>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9X5_ID_UART1 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "disabled";
@@ -684,7 +685,7 @@
adc0: adc at f804c000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf804c000 0x100>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_ADC IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external;
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
@@ -727,7 +728,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9X5_ID_SPI0 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
<&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
dma-names = "tx", "rx";
@@ -741,7 +742,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9X5_ID_SPI1 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
<&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
dma-names = "tx", "rx";
@@ -756,7 +757,7 @@
compatible = "atmel,at91sam9rl-udc";
reg = <0x00500000 0x80000
0xf803c000 0x400>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9X5_ID_UDPHS IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
ep0 {
@@ -821,7 +822,7 @@
rtc at fffffeb0 {
compatible = "atmel,at91sam9x5-rtc";
reg = <0xfffffeb0 0x40>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
};
@@ -850,14 +851,14 @@
usb0: ohci at 00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9X5_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
usb1: ehci at 00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9X5_ID_UHPHS IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list