[PATCH v4 1/2] watchdog: at91sam9_wdt: add device tree support

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Thu Sep 27 01:56:36 EDT 2012


On 12:25 Tue 25 Sep     , Fabio Porcedda wrote:
> Tested on an at91sam9260 board (evk-pro3)
> 
> Signed-off-by: Fabio Porcedda <fabio.porcedda at gmail.com>
> ---
>  .../devicetree/bindings/watchdog/atmel-wdt.txt      | 19 +++++++++++++++++++
>  drivers/watchdog/at91sam9_wdt.c                     | 21 +++++++++++++++++++++
>  2 files changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> new file mode 100644
> index 0000000..5947929
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> @@ -0,0 +1,19 @@
> +* Atmel Watchdog Timers
> +
> +** at91sam9-wdt
> +
> +Required properties:
> +- compatible: must be "atmel,at91sam9260-wdt".
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +
> +Optional properties:
> +- heartbeat: contains the watchdog heartbeats in seconds.
more I read this binding more it's seems wrong

Today we do not use yet the watchdog framework which we will so we need to
use the same binding as the watchdog framework

So when we switch the DT will not change

Best Regards,
J.



More information about the linux-arm-kernel mailing list