[PATCH] ARM: mxs: m28evk: Disable OCOTP OUI loading

[Shawn Guo]

On Wed, Sep 19, 2012 at 12:37:17AM +0200, Marek Vasut wrote:
> Don't load the FEC MAC address from OCOTP, but use the one supplied
> via device tree by U-Boot. This is the preferred way, every DT-capable
> bootloader does set up "mac-address" and "local-mac-address" properties
> into the DT passed to the kernel.
> 
Ok, since you are the maintainer of m28evk board, it could be your call
to do so.  While for imx28-evk, the kernel at least runs with bootlets
which is not DT capable.

> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> ---
>  arch/arm/mach-mxs/mach-mxs.c |    2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
> index 170a930..71d47f5 100644
> --- a/arch/arm/mach-mxs/mach-mxs.c
> +++ b/arch/arm/mach-mxs/mach-mxs.c
> @@ -255,8 +255,6 @@ static void __init imx28_evk_post_init(void)
>  
>  static void __init m28evk_init(void)
>  {
> -	update_fec_mac_prop(OUI_DENX);
> -

Since it's the only user of OUI_DENX, can we remove enum mac_oui
completely and make update_fec_mac_prop a fsl specific call?

Shawn

>  	mxsfb_pdata.mode_list = m28evk_video_modes;
>  	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
>  	mxsfb_pdata.default_bpp = 16;
> -- 
> 1.7.10.4
>