[PATCH] ARM: dts: use uart2 for console on smdkv310 and smdk5250

[Thomas Abraham]

On 17 September 2012 17:16, Kukjin Kim <kgene.kim at samsung.com> wrote:
>
> Cc: Thomas Abraham <thomas.abraham at linaro.org>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
>  arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 +-
>  arch/arm/boot/dts/exynos5250-smdk5250.dts |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> index 1beccc8..cb01e3d 100644
> --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> @@ -26,7 +26,7 @@
>         };
>
>         chosen {
> -               bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
> +               bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
>         };

Dear Mr. Kim,

What is the reason for changing the console port to 2 for smdkv310 board?

Thanks,
Thomas.

>
>         sdhci at 12530000 {
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index 8a5e348..62e1039 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -21,7 +21,7 @@
>         };
>
>         chosen {
> -               bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
> +               bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
>         };
>
>         i2c at 12C60000 {
> --
> 1.7.4.1
>