[PATCH RFC 05/15 v5] gpio-max730x: Add block GPIO API

Roland Stigge stigge at antcom.de
Wed Oct 17 08:31:37 EDT 2012


This patch adds block GPIO API support to the MAX730x driver.

Due to hardware constraints in this chip, simultaneous access to GPIO lines can
only be done in groups of 8: GPIOs 0-7, 8-15, 16-23, 24-27. However, setting
and clearing will be done at once.

Signed-off-by: Roland Stigge <stigge at antcom.de>

---
 drivers/gpio/gpio-max730x.c |   61 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

--- linux-2.6.orig/drivers/gpio/gpio-max730x.c
+++ linux-2.6/drivers/gpio/gpio-max730x.c
@@ -146,6 +146,44 @@ static int max7301_get(struct gpio_chip
 	return level;
 }
 
+static unsigned long max7301_get_block(struct gpio_chip *chip,
+				       unsigned long mask)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	int i, j;
+	unsigned long result = 0;
+
+	for (i = 0; i < 4; i++) {
+		if ((mask >> (i * 8)) & 0xFF) { /* i/o only if necessary */
+			u8 in_level = ts->read(ts->dev, 0x44 + i * 8);
+			u8 in_mask = 0;
+			u8 out_level = (ts->out_level >> (i * 8 + 4)) & 0xFF;
+			u8 out_mask = 0;
+
+			for (j = 0; j < 8; j++) {
+				int offset = 4 + i * 8 + j;
+				int config = (ts->port_config[offset >> 2] >>
+					      ((offset & 3) << 1)) &
+					PIN_CONFIG_MASK;
+
+				switch (config) {
+				case PIN_CONFIG_OUT:
+					out_mask |= BIT(j);
+					break;
+				case PIN_CONFIG_IN_WO_PULLUP:
+				case PIN_CONFIG_IN_PULLUP:
+					in_mask |= BIT(j);
+				}
+			}
+
+			result |= ((unsigned long)(in_level & in_mask) |
+				   (out_level & out_mask)) << (i * 8);
+		}
+	}
+
+	return result & mask;
+}
+
 static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct max7301 *ts = container_of(chip, struct max7301, chip);
@@ -160,6 +198,27 @@ static void max7301_set(struct gpio_chip
 	mutex_unlock(&ts->lock);
 }
 
+static void max7301_set_block(struct gpio_chip *chip, unsigned long mask,
+			      unsigned long values)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	unsigned long changes;
+	int i;
+
+	mutex_lock(&ts->lock);
+
+	changes = (ts->out_level ^ (values << 4)) & (mask << 4);
+	ts->out_level ^= changes;
+
+	for (i = 0; i < 4; i++) {
+		if ((changes >> (i * 8 + 4)) & 0xFF) /* i/o only on change */
+			ts->write(ts->dev, 0x44 + i * 8,
+				  (ts->out_level >> (i * 8 + 4)) & 0xFF);
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
 int __devinit __max730x_probe(struct max7301 *ts)
 {
 	struct device *dev = ts->dev;
@@ -183,8 +242,10 @@ int __devinit __max730x_probe(struct max
 
 	ts->chip.direction_input = max7301_direction_input;
 	ts->chip.get = max7301_get;
+	ts->chip.get_block = max7301_get_block;
 	ts->chip.direction_output = max7301_direction_output;
 	ts->chip.set = max7301_set;
+	ts->chip.set_block = max7301_set_block;
 
 	ts->chip.base = pdata->base;
 	ts->chip.ngpio = PIN_NUMBER;



More information about the linux-arm-kernel mailing list