[PATCH 4/6] ARM: S3C2410: I2C driver polling mode support

[Heiko Stübner]

Am Dienstag, 9. Oktober 2012, 13:48:50 schrieb Vasanth Ananthan:
> This patch adds polling mode support for i2c s3c-2410 driver.
> The I2C_SATAPHY controller lacks an interrupt line but the s3c-2410 driver
> is interrupt driven. Hence this support is required for functioning
> of the I2C_SATAPHY controller.
> 
> Signed-off-by: Vasanth Ananthan <vasanth.a at samsung.com>
> ---
>  drivers/i2c/busses/i2c-s3c2410.c |   84
> +++++++++++++++++++++++++++++--------- 1 files changed, 65 insertions(+),
> 19 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c
> b/drivers/i2c/busses/i2c-s3c2410.c index 5ae3b02..699b530 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c

[...]

> @@ -102,10 +103,14 @@ static struct platform_device_id s3c24xx_driver_ids[]
> = { };
>  MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
> 
> +static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long
> iicstat); +
>  #ifdef CONFIG_OF
>  static const struct of_device_id s3c24xx_i2c_match[] = {
>  	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
>  	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
> +	{ .compatible = "samsung,s3c2440-sataphy-i2c",
> +	  .data = (void *)(QUIRK_S3C2440|QUIRK_SATAPHY|QUIRK_NO_GPIO) },
>  	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
>  	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
>  	{},

Out of curiosity, why is it called s3c2440-sataphy-i2c when it's an exynos 
specific component?


Heiko