[PATCH v5 7/7] ARM: davinci: da850 evm: register uio_pruss device

[Matt Porter]

Registers the uio_pruss platform device on the DA850 EVM.

Tested on AM180x-EVM using the PRU_memAccessPRUDataRam and
PRU_memAccessL3andDDR examples from the PRU userspace tools
available from http://www.ti.com/tool/sprc940

Signed-off-by: Matt Porter <mporter at ti.com>
---
 arch/arm/mach-davinci/board-da850-evm.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 7359375..9e7f954 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -31,6 +31,7 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/uio_pruss.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
 #include <linux/spi/spi.h>
@@ -1339,6 +1340,11 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
+	ret = da8xx_register_uio_pruss();
+	if (ret)
+		pr_warning("da850_evm_init: pruss initialization failed: %d\n",
+				ret);
+
 	/* Handle board specific muxing for LCD here */
 	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
 	if (ret)
-- 
1.7.9.5