struct sys_timer .suspend/.resume ignored for ARCH_SA1100/ARCH_PXA?

Russell King - ARM Linux linux at arm.linux.org.uk
Wed Nov 7 18:23:41 EST 2012


On Wed, Nov 07, 2012 at 04:06:12PM -0700, Stephen Warren wrote:
> Russell, Kevin,
> 
> In commit 9e4559d "[ARM] 4258/2: Support for dynticks in idle loop" in
> 2007, Kevin applied the following change:
> 
> > diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
> 
> > -#ifdef CONFIG_PM
> > +#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
> >  static int timer_suspend(struct sys_device *dev, pm_message_t state)
> 
> This means that for any architecture that enables GENERIC_CLOCKEVENTS,
> the .suspend/.resume fields of struct sys_timer will be ignored, since
> timer_suspend()/timer_resume() won't be filled into
> arch/arm/kernel/time.c's struct syscore_ops timer_syscore_ops.

Correct.

> Later, in commit 3e238be "[ARM] sa1100: add clock event support" in
> 2008, Russell modified ARCH_SA1100 to select GENERIC_CLOCKEVENTS. I
> believe this means that sa1100_timer_suspend()/resume() haven't been
> used since.

Also correct.

> A similar issue exists for ARCH_PXA.
> 
> Should sa1100_timer_suspend(), sa1100_timer_resume(),
> pxa_timer_suspend(), pxa_timer_suspend() simply be deleted since they
> are dead code, or should they be revived somehow; is the ifdef from
> Kevin's change incorrect?

Hmm, that's probably not good for either of those two platforms; it means
that the OSCR and match registers get lost over a suspend/resume.  That's
not a real big problem for the clocksource code, but if its being used
for something else (eg, rtc) then it probably means we have a failure
there.

> As background, I'm working on a patch series that will remove all fields
> from struct sys_timer except for .init, and will then replace the ARM
> machine descriptor's .timer struct pointer with a .init_timer function
> pointer. This will allow machines, on an opt-in basis, to call into a
> central function in drivers/clocksource to initialize the required
> timer, as determined by searching device tree for a known device type,
> in much the same way as has been proposed to use a single implementation
> for for the machine descriptor's .init_irq. As part of this, I've been
> looking at moving any use of struct sys_timer .suspend/.resume into e.g.
> struct clock_event_device .suspend/.resume, and found this issue.

Don't forget we still have a number of platforms not converted to
the generic event/clocksource stuff (because they lack the necessary
counters/timers for this 'new' infrastructure.)



More information about the linux-arm-kernel mailing list