[PATCH v3 3/4] ARM: s3c64xx: Decouple lcd type from display controller window data
Thomas Abraham
thomas.abraham at linaro.org
Sat Mar 24 12:28:47 EDT 2012
The display controller window data should contain window configuration data
for only one type of lcd panel. So, for real6410 and mini6410 boards, split
the existing display controller window data, which contains window
configuration data for two different types of lcd panels, into two seperate
instances and register one of them depending on the type of the lcd panel
detected at runtime.
This is a prerequisite change for a subsequent commit that reorders the
platform data of display controller by moving video interface timing out
of window setup data.
Cc: Darius Augulis <augulis.darius at gmail.com>
Cc: Jingoo Han <jg1.han at samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
arch/arm/mach-s3c64xx/mach-mini6410.c | 82 +++++++++++++++++---------------
arch/arm/mach-s3c64xx/mach-real6410.c | 82 +++++++++++++++++---------------
2 files changed, 88 insertions(+), 76 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index c34c2ab..34f5195 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -151,41 +151,49 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
.sets = mini6410_nand_sets,
};
-static struct s3c_fb_pd_win mini6410_fb_win[] = {
- {
- .win_mode = { /* 4.3" 480x272 */
- .left_margin = 3,
- .right_margin = 2,
- .upper_margin = 1,
- .lower_margin = 1,
- .hsync_len = 40,
- .vsync_len = 1,
- .xres = 480,
- .yres = 272,
- },
- .max_bpp = 32,
- .default_bpp = 16,
- }, {
- .win_mode = { /* 7.0" 800x480 */
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 16,
+static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
},
+ .max_bpp = 32,
+ .default_bpp = 16,
};
-static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .win[0] = &mini6410_fb_win[0],
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
+ {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &mini6410_lcd_type0_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ }, {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &mini6410_lcd_type1_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ },
+ { },
};
static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
@@ -283,7 +291,7 @@ static void mini6410_parse_features(
"screen type already set\n", f);
} else {
int li = f - '0';
- if (li >= ARRAY_SIZE(mini6410_fb_win))
+ if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
printk(KERN_INFO "MINI6410: '%c' out "
"of range LCD mode\n", f);
else {
@@ -307,14 +315,12 @@ static void __init mini6410_machine_init(void)
/* Parse the feature string */
mini6410_parse_features(&features, mini6410_features_str);
- mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
-
printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
- mini6410_lcd_pdata.win[0]->win_mode.xres,
- mini6410_lcd_pdata.win[0]->win_mode.yres);
+ mini6410_lcd_pdata[features.lcd_index].win[0]->win_mode.xres,
+ mini6410_lcd_pdata[features.lcd_index].win[0]->win_mode.yres);
s3c_nand_set_platdata(&mini6410_nand_info);
- s3c_fb_set_platdata(&mini6410_lcd_pdata);
+ s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index be2a9a2..21f91e5 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -117,41 +117,49 @@ static struct platform_device real6410_device_eth = {
},
};
-static struct s3c_fb_pd_win real6410_fb_win[] = {
- {
- .win_mode = { /* 4.3" 480x272 */
- .left_margin = 3,
- .right_margin = 2,
- .upper_margin = 1,
- .lower_margin = 1,
- .hsync_len = 40,
- .vsync_len = 1,
- .xres = 480,
- .yres = 272,
- },
- .max_bpp = 32,
- .default_bpp = 16,
- }, {
- .win_mode = { /* 7.0" 800x480 */
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 16,
+static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
},
+ .max_bpp = 32,
+ .default_bpp = 16,
};
-static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .win[0] = &real6410_fb_win[0],
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
+ {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &real6410_lcd_type0_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ }, {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &real6410_lcd_type1_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ },
+ { },
};
static struct mtd_partition real6410_nand_part[] = {
@@ -264,7 +272,7 @@ static void real6410_parse_features(
"screen type already set\n", f);
} else {
int li = f - '0';
- if (li >= ARRAY_SIZE(real6410_fb_win))
+ if (li >= ARRAY_SIZE(real6410_lcd_pdata))
printk(KERN_INFO "REAL6410: '%c' out "
"of range LCD mode\n", f);
else {
@@ -288,13 +296,11 @@ static void __init real6410_machine_init(void)
/* Parse the feature string */
real6410_parse_features(&features, real6410_features_str);
- real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
-
printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
- real6410_lcd_pdata.win[0]->win_mode.xres,
- real6410_lcd_pdata.win[0]->win_mode.yres);
+ real6410_lcd_pdata[features.lcd_index].win[0]->win_mode.xres,
+ real6410_lcd_pdata[features.lcd_index].win[0]->win_mode.yres);
- s3c_fb_set_platdata(&real6410_lcd_pdata);
+ s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
s3c24xx_ts_set_platdata(NULL);
--
1.6.6.rc2
More information about the linux-arm-kernel
mailing list