[PATCH] ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci

Kukjin Kim kgene.kim at samsung.com
Wed Mar 7 08:19:47 EST 2012


On 03/06/12 01:51, Kukjin Kim wrote:
> On 03/05/12 18:29, Jaehoon Chung wrote:
>> Hi Kukjin.
>>
>> Is it merged?
>>
>> Best Regards,
>> Jaehoon Chung
>>
>> On 02/24/2012 06:56 PM, Thomas Abraham wrote:
>>
>>> On 23 February 2012 11:18, Jaehoon Chung<jh80.chung at samsung.com> wrote:
>>>> Thomas Arbrahams's patchset have changed the device name in sdhci-s3c.c
>>>> (mmc: sdhci-s3c: Rework platform data and add device tree support)
>>>> But didn't change the regulator_consumer name.
>>>> So maybe didn't initialize the mmc/sd card for exynos4.
>>>>
>>>> This patch is fixed that (based-on linux-samsung for-next branch)
>>>>
>>>> Signed-off-by: Jaehoon Chung<jh80.chung at samsung.com>
>>>> Signed-off-by: kyungmin Park<kyungmin.park at samsung.com>
>>>> ---
>>>> arch/arm/mach-exynos/mach-nuri.c | 4 ++--
>>>> arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
>>>> 2 files changed, 3 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-exynos/mach-nuri.c
>>>> b/arch/arm/mach-exynos/mach-nuri.c
>>>> index a6b9162..251dd7a 100644
>>>> --- a/arch/arm/mach-exynos/mach-nuri.c
>>>> +++ b/arch/arm/mach-exynos/mach-nuri.c
>>>> @@ -116,7 +116,7 @@ static struct s3c_sdhci_platdata
>>>> nuri_hsmmc0_data __initdata = {
>>>> };
>>>>
>>>> static struct regulator_consumer_supply emmc_supplies[] = {
>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
>>>> REGULATOR_SUPPLY("vmmc", "dw_mmc"),
>>>> };
>>>>
>>>> @@ -415,7 +415,7 @@ static struct regulator_consumer_supply
>>>> __initdata max8997_ldo12_[] = {
>>>> REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
>>>> };
>>>> static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
>>>> };
>>>> static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
>>>> REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
>>>> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c
>>>> b/arch/arm/mach-exynos/mach-universal_c210.c
>>>> index 6017a21..320cb1d 100644
>>>> --- a/arch/arm/mach-exynos/mach-universal_c210.c
>>>> +++ b/arch/arm/mach-exynos/mach-universal_c210.c
>>>> @@ -749,7 +749,7 @@ static struct s3c_sdhci_platdata
>>>> universal_hsmmc0_data __initdata = {
>>>> };
>>>>
>>>> static struct regulator_consumer_supply mmc0_supplies[] = {
>>>> - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
>>>> + REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
>>>> };
>>>>
>>>> static struct regulator_init_data mmc0_fixed_voltage_init_data = {
>>>
>>> Reviewed-by: Thomas Abraham<thomas.abraham at linaro.org>
>
> Looks OK, will apply.
>

(Cc'ed Marek)

Hi Kyungmin, Marek and Jaehoon,

As you know, same patches have been submitted duplicated and this should 
be fixed. Which one would be better to send upstream?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.



More information about the linux-arm-kernel mailing list