[PATCH 14/19] ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 and u9540

Lee Jones lee.jones at linaro.org
Tue Jul 31 09:39:08 EDT 2012


Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/db8500.dtsi  |  603 ----------------------------------------
 arch/arm/boot/dts/dbx5x0.dtsi  |  603 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/snowball.dts |    2 +-
 3 files changed, 604 insertions(+), 604 deletions(-)
 delete mode 100644 arch/arm/boot/dts/db8500.dtsi
 create mode 100644 arch/arm/boot/dts/dbx5x0.dtsi

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
deleted file mode 100644
index a3bee0a..0000000
--- a/arch/arm/boot/dts/db8500.dtsi
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	soc-u9500 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		intc: interrupt-controller at a0411000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xa0411000 0x1000>,
-			      <0xa0410100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
-		};
-
-		timer at a0410600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
-		};
-
-		rtc at 80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
-			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
-		};
-
-		gpio0: gpio at 8012e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <0>;
-		};
-
-		gpio1: gpio at 8012e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <1>;
-		};
-
-		gpio2: gpio at 8000e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <2>;
-		};
-
-		gpio3: gpio at 8000e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <3>;
-		};
-
-		gpio4: gpio at 8000e100 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <4>;
-		};
-
-		gpio5: gpio at 8000e180 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <5>;
-		};
-
-		gpio6: gpio at 8011e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <6>;
-		};
-
-		gpio7: gpio at 8011e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <7>;
-		};
-
-		gpio8: gpio at a03fe000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <8>;
-		};
-
-		pinctrl {
-			compatible = "stericsson,nmk_pinctrl";
-		};
-
-		usb at a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
-			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
-		};
-
-		dma-controller at 801C0000 {
-			compatible = "stericsson,db8500-dma40",
-					"stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			interrupts = <0 25 0x4>;
-		};
-
-		prcmu at 80157000 {
-			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			interrupts = <0 47 0x4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			prcmu-timer-4 at 80157450 {
-				compatible = "stericsson,db8500-prcmu-timer-4";
-				reg = <0x80157450 0xC>;
-			};
-
-			db8500-prcmu-regulators {
-				compatible = "stericsson,db8500-prcmu-regulator";
-
-				// DB8500_REGULATOR_VAPE
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-					regulator-always-on;
-				};
-
-				// DB8500_REGULATOR_VARM
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				// DB8500_REGULATOR_VMODEM
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				// DB8500_REGULATOR_VPLL
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				// DB8500_REGULATOR_VSMPS1
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				// DB8500_REGULATOR_VSMPS2
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				// DB8500_REGULATOR_VSMPS3
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				// DB8500_REGULATOR_VRF1
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSP
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAPIPE
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSP
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAPIPE
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SGA
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12RET
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34RET
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500 at 5 {
-				compatible = "stericsson,ab8500";
-				reg = <5>; /* mailbox 5 is i2c */
-				interrupts = <0 40 0x4>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				ab8500-rtc {
-					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 0x4
-					              18 0x4>;
-					interrupt-names = "60S", "ALARM";
-				};
-
-				ab8500-gpadc {
-					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 0x4
-						      39 0x4>;
-					interrupt-names = "HW_CONV_END", "SW_CONV_END";
-					vddadc-supply = <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500-usb {
-					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 0x4
-						       96 0x4
-						       14 0x4
-						       15 0x4
-						       79 0x4
-						       74 0x4
-						       75 0x4>;
-					interrupt-names = "ID_WAKEUP_R",
-							  "ID_WAKEUP_F",
-							  "VBUS_DET_F",
-							  "VBUS_DET_R",
-							  "USB_LINK_STATUS",
-							  "USB_ADP_PROBE_PLUG",
-							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
-					v-ape-supply = <&db8500_vape_reg>;
-					musb_1v8-supply = <&db8500_vsmps2_reg>;
-				};
-
-				ab8500-ponkey {
-					compatible = "stericsson,ab8500-ponkey";
-					interrupts = <6 0x4
-						      7 0x4>;
-					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-				};
-
-				ab8500-sysctrl {
-					compatible = "stericsson,ab8500-sysctrl";
-				};
-
-				ab8500-pwm {
-					compatible = "stericsson,ab8500-pwm";
-				};
-
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
-					compatible = "stericsson,ab8500-codec";
-
-					stericsson,earpeice-cmv = <950>; /* Units in mV. */
-				};
-
-				ab8500-regulators {
-					compatible = "stericsson,ab8500-regulator";
-
-					// supplies to the display/camera
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-boot-on;
-						/* BUG: If turned off MMC will be affected. */
-						regulator-always-on;
-					};
-
-					// supplies to the on-board eMMC
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for VAUX3; SDcard slots
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					// supply for tvout; gpadc; TVOUT LDO
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					// supply for ab8500-usb; USB LDO
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					// supply for ab8500-vaudio; VAUDIO LDO
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					// supply for v-anamic1 VAMic1-LDO
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					// supply for v-dmic; VDMIC LDO
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					// supply for U8500 CSI/DSI; VANA LDO
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		i2c at 80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clock-frequency = <400000>;
-			stericsson,slsu = <0xe>;
-			stericsson,tft = <1>;
-			stericsson,rft = <8>;
-			stericsson,timeout = <200>;
-			stericsson,i2c_freq_mode_fast;
-		};
-
-		i2c at 80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clock-frequency = <400000>;
-			stericsson,slsu = <0xe>;
-			stericsson,tft = <1>;
-			stericsson,rft = <8>;
-			stericsson,timeout = <200>;
-			stericsson,i2c_freq_mode_fast;
-		};
-
-		i2c at 80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clock-frequency = <400000>;
-			stericsson,slsu = <0xe>;
-			stericsson,tft = <1>;
-			stericsson,rft = <8>;
-			stericsson,timeout = <200>;
-			stericsson,i2c_freq_mode_fast;
-		};
-
-		i2c at 80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clock-frequency = <400000>;
-			stericsson,slsu = <0xe>;
-			stericsson,tft = <1>;
-			stericsson,rft = <8>;
-			stericsson,timeout = <200>;
-			stericsson,i2c_freq_mode_fast;
-		};
-
-		i2c at 8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clock-frequency = <400000>;
-			stericsson,slsu = <0xe>;
-			stericsson,tft = <1>;
-			stericsson,rft = <8>;
-			stericsson,timeout = <200>;
-			stericsson,i2c_freq_mode_fast;
-		};
-
-		ssp at 80002000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <80002000 0x1000>;
-			interrupts = <0 14 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
-				    &gpio6 22 0x4 &gpio7 0 0x4>;
-
-		};
-
-		uart at 80120000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
-			status = "disabled";
-		};
-		uart at 80121000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
-			status = "disabled";
-		};
-		uart at 80007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
-			status = "disabled";
-		};
-
-		sdi at 80126000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
-			status = "disabled";
-		};
-		sdi at 80118000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
-			status = "disabled";
-		};
-		sdi at 80005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
-			status = "disabled";
-		};
-		sdi at 80119000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
-			status = "disabled";
-		};
-		sdi at 80114000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
-			status = "disabled";
-		};
-		sdi at 80008000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 100 0x4>;
-			status = "disabled";
-		};
-
-		external-bus at 50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000000>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
new file mode 100644
index 0000000..a3bee0a
--- /dev/null
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -0,0 +1,603 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	soc-u9500 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller at a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <0 13 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 7 0x4>;
+		};
+
+		timer at a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <1 13 0x304>;
+		};
+
+		rtc at 80154000 {
+			compatible = "arm,rtc-pl031", "arm,primecell";
+			reg = <0x80154000 0x1000>;
+			interrupts = <0 18 0x4>;
+		};
+
+		gpio0: gpio at 8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <0 119 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
+		};
+
+		gpio1: gpio at 8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <0 120 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
+		};
+
+		gpio2: gpio at 8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <0 121 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
+		};
+
+		gpio3: gpio at 8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <0 122 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
+		};
+
+		gpio4: gpio at 8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <0 123 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
+		};
+
+		gpio5: gpio at 8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <0 124 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
+		};
+
+		gpio6: gpio at 8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <0 125 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
+		};
+
+		gpio7: gpio at 8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <0 126 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
+		};
+
+		gpio8: gpio at a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <0 127 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+		};
+
+		pinctrl {
+			compatible = "stericsson,nmk_pinctrl";
+		};
+
+		usb at a03e0000 {
+			compatible = "stericsson,db8500-musb",
+				"mentor,musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <0 23 0x4>;
+		};
+
+		dma-controller at 801C0000 {
+			compatible = "stericsson,db8500-dma40",
+					"stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			interrupts = <0 25 0x4>;
+		};
+
+		prcmu at 80157000 {
+			compatible = "stericsson,db8500-prcmu";
+			reg = <0x80157000 0x1000>;
+			interrupts = <0 47 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			prcmu-timer-4 at 80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500 at 5 {
+				compatible = "stericsson,ab8500";
+				reg = <5>; /* mailbox 5 is i2c */
+				interrupts = <0 40 0x4>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 0x4
+					              18 0x4>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 0x4
+						      39 0x4>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+				};
+
+				ab8500-usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 0x4
+						       96 0x4
+						       14 0x4
+						       15 0x4
+						       79 0x4
+						       74 0x4
+						       75 0x4>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-ponkey";
+					interrupts = <6 0x4
+						      7 0x4>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					// supply for ab8500-usb; USB LDO
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					// supply for v-anamic1 VAMic1-LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		i2c at 80004000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			reg = <0x80004000 0x1000>;
+			interrupts = <0 21 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clock-frequency = <400000>;
+			stericsson,slsu = <0xe>;
+			stericsson,tft = <1>;
+			stericsson,rft = <8>;
+			stericsson,timeout = <200>;
+			stericsson,i2c_freq_mode_fast;
+		};
+
+		i2c at 80122000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			reg = <0x80122000 0x1000>;
+			interrupts = <0 22 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clock-frequency = <400000>;
+			stericsson,slsu = <0xe>;
+			stericsson,tft = <1>;
+			stericsson,rft = <8>;
+			stericsson,timeout = <200>;
+			stericsson,i2c_freq_mode_fast;
+		};
+
+		i2c at 80128000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			reg = <0x80128000 0x1000>;
+			interrupts = <0 55 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clock-frequency = <400000>;
+			stericsson,slsu = <0xe>;
+			stericsson,tft = <1>;
+			stericsson,rft = <8>;
+			stericsson,timeout = <200>;
+			stericsson,i2c_freq_mode_fast;
+		};
+
+		i2c at 80110000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			reg = <0x80110000 0x1000>;
+			interrupts = <0 12 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clock-frequency = <400000>;
+			stericsson,slsu = <0xe>;
+			stericsson,tft = <1>;
+			stericsson,rft = <8>;
+			stericsson,timeout = <200>;
+			stericsson,i2c_freq_mode_fast;
+		};
+
+		i2c at 8012a000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <0 51 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clock-frequency = <400000>;
+			stericsson,slsu = <0xe>;
+			stericsson,tft = <1>;
+			stericsson,rft = <8>;
+			stericsson,timeout = <200>;
+			stericsson,i2c_freq_mode_fast;
+		};
+
+		ssp at 80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <80002000 0x1000>;
+			interrupts = <0 14 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			// Add one of these for each child device
+			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
+				    &gpio6 22 0x4 &gpio7 0 0x4>;
+
+		};
+
+		uart at 80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <0 11 0x4>;
+			status = "disabled";
+		};
+		uart at 80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+		uart at 80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <0 26 0x4>;
+			status = "disabled";
+		};
+
+		sdi at 80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <0 60 0x4>;
+			status = "disabled";
+		};
+		sdi at 80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <0 50 0x4>;
+			status = "disabled";
+		};
+		sdi at 80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <0 41 0x4>;
+			status = "disabled";
+		};
+		sdi at 80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+		sdi at 80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+		sdi at 80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 100 0x4>;
+			status = "disabled";
+		};
+
+		external-bus at 50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 7e334d4..df6fc57 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "db8500.dtsi"
+/include/ "dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list