[PATCH 1/2] drivers: bus: add a new driver for omap-ocp2scp

ABRAHAM, KISHON VIJAY kishon at ti.com
Tue Jul 17 01:13:29 EDT 2012


+Arnd Bergmann

On Mon, Jul 16, 2012 at 7:43 PM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
> Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
> creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
> USB2PHY is connected to ocp2scp.
>
> This also includes device tree support for ocp2scp driver and
> the documentation with device tree binding information is updated.
>
> Cc: Felipe Balbi <balbi at ti.com>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  .../devicetree/bindings/bus/omap-ocp2scp.txt       |   10 ++
>  drivers/Kconfig                                    |    2 +
>  drivers/Makefile                                   |    2 +
>  drivers/bus/Kconfig                                |   15 +++
>  drivers/bus/Makefile                               |    5 +
>  drivers/bus/omap-ocp2scp.c                         |   98 ++++++++++++++++++++
>  6 files changed, 132 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
>  create mode 100644 drivers/bus/Kconfig
>  create mode 100644 drivers/bus/Makefile
>  create mode 100644 drivers/bus/omap-ocp2scp.c
>
> diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> new file mode 100644
> index 0000000..d2fe064
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> @@ -0,0 +1,10 @@
> +* OMAP OCP2SCP - ocp interface to scp interface
> +
> +properties:
> +- compatible : Should be "ti,omap-ocp2scp"
> +- #address-cells, #size-cells : Must be present if the device has sub-nodes
> +- ranges : the child address space are mapped 1:1 onto the parent address space
> +- ti,hwmods : must be "ocp2scp_usb_phy"
> +
> +Sub-nodes:
> +All the devices connected to ocp2scp are described using sub-node to ocp2scp
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index bfc9186..4fe1e4c 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -2,6 +2,8 @@ menu "Device Drivers"
>
>  source "drivers/base/Kconfig"
>
> +source "drivers/bus/Kconfig"
> +
>  source "drivers/connector/Kconfig"
>
>  source "drivers/mtd/Kconfig"
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 2ba29ff..cac3819 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -5,6 +5,8 @@
>  # Rewritten to use lists instead of if-statements.
>  #
>
> +obj-y                          += bus/
> +
>  # GPIO must come after pinctrl as gpios may need to mux pins etc
>  obj-y                          += pinctrl/
>  obj-y                          += gpio/
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> new file mode 100644
> index 0000000..6270415
> --- /dev/null
> +++ b/drivers/bus/Kconfig
> @@ -0,0 +1,15 @@
> +#
> +# Bus Devices
> +#
> +
> +menu "Bus devices"
> +
> +config OMAP_OCP2SCP
> +       tristate "OMAP OCP2SCP DRIVER"
> +       help
> +         Driver to enable ocp2scp module which transforms ocp interface
> +         protocol to scp protocol. In OMAP4, USB PHY is connected via
> +         OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
> +         OCP2SCP.
> +
> +endmenu
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> new file mode 100644
> index 0000000..0ec50bc
> --- /dev/null
> +++ b/drivers/bus/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for the bus drivers.
> +#
> +
> +obj-$(CONFIG_OMAP_OCP2SCP)     += omap-ocp2scp.o
> diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
> new file mode 100644
> index 0000000..8c3db3a
> --- /dev/null
> +++ b/drivers/bus/omap-ocp2scp.c
> @@ -0,0 +1,98 @@
> +/*
> + * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon at ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +static int ocp2scp_remove_devices(struct device *dev, void *c)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +
> +       platform_device_unregister(pdev);
> +
> +       return 0;
> +}
> +
> +static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
> +{
> +       int                     ret;
> +       struct device_node      *np = pdev->dev.of_node;
> +
> +       if (np) {
> +               ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
> +               if (ret) {
> +                       dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
> +                       goto err0;
> +               }
> +       }
> +       pm_runtime_enable(&pdev->dev);
> +
> +       return 0;
> +
> +err0:
> +       device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
> +
> +       return ret;
> +}
> +
> +static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
> +{
> +       pm_runtime_disable(&pdev->dev);
> +       device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
> +
> +       return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id omap_ocp2scp_id_table[] = {
> +       { .compatible = "ti,omap-ocp2scp" },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#endif
> +
> +static struct platform_driver omap_ocp2scp_driver = {
> +       .probe          = omap_ocp2scp_probe,
> +       .remove         = __devexit_p(omap_ocp2scp_remove),
> +       .driver         = {
> +               .name   = "omap-ocp2scp",
> +               .owner  = THIS_MODULE,
> +               .of_match_table = of_match_ptr(omap_ocp2scp_id_table),
> +       },
> +};
> +
> +static int __init omap_ocp2scp_init(void)
> +{
> +       return platform_driver_register(&omap_ocp2scp_driver);
> +}
> +arch_initcall(omap_ocp2scp_init);
> +
> +static void __exit omap_ocp2scp_exit(void)
> +{
> +       platform_driver_unregister(&omap_ocp2scp_driver);
> +}
> +module_exit(omap_ocp2scp_exit);
> +
> +MODULE_ALIAS("platform: omap-ocp2scp");
> +MODULE_AUTHOR("Texas Instruments Inc.");
> +MODULE_DESCRIPTION("OMAP OCP2SCP DRIVER");
> +MODULE_LICENSE("GPLv2");
> --
> 1.7.5.4
>



More information about the linux-arm-kernel mailing list