[PATCH] ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board

[Mark Brown]

None of the GPIO IRQs are connected so there is no reason to specify a
base.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index df3103d..0fe4f15 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = {
 
 static struct wm831x_pdata smdk6410_wm1192_pdata = {
 	.pre_init = wm1192_pre_init,
-	.irq_base = IRQ_BOARD_START,
 
 	.backlight = &wm1192_backlight_pdata,
 	.dcdc = {
-- 
1.7.10