[PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq

Mark Langsdorf mark.langsdorf at calxeda.com
Wed Dec 5 11:48:41 EST 2012


Highbank processors depend on the external ECME to perform voltage
management based on a requested frequency. Communication between the
A9 cores and the ECME happens over the pl320 IPC channel.

Signed-off-by: Mark Langsdorf <mark.langsdorf at calxeda.com>
Cc: shawn.guo at linaro.org
Cc: mturquette at linaro.org
---
Changes from v7
	Removed old attribution to cpufreq-cpu0.
	Added some description in the documentation.
	Made cpu_dev, cpu_clk into local variables.
	Removed __devinit.
	Removed some unneeded includes.
	Added a brace to clarify some nested if logic.
Changes from v6
        Removed devicetree bindings documentation.
        Restructured driver to use clk notifications.
        Core driver logic is now cpufreq-clk0.
Changes from v5
        Changed ipc_transmit() to pl320_ipc_transmit().
Changes from v4
        Removed erroneous changes to arch/arm/Kconfig.
        Removed unnecessary changes to drivers/cpufreq/Kconfig.arm
        Alphabetized additions to arch/arm/mach-highbank/Kconfig
        Changed ipc call and header to match new ipc location in 
        drivers/mailbox.
Changes from v3
        None.
Changes from v2
        Changed transition latency binding in code to match documentation.
Changes from v1
        Added highbank specific Kconfig changes.

 arch/arm/boot/dts/highbank.dts     |  10 ++++
 arch/arm/mach-highbank/Kconfig     |   2 +
 drivers/cpufreq/Kconfig.arm        |  16 ++++++
 drivers/cpufreq/Makefile           |   1 +
 drivers/cpufreq/highbank-cpufreq.c | 102 +++++++++++++++++++++++++++++++++++++
 5 files changed, 131 insertions(+)
 create mode 100644 drivers/cpufreq/highbank-cpufreq.c

diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 0c6fc34..7c4c27d 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -36,6 +36,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 
 		cpu at 1 {
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 2896881..b7862da 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,7 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..7aaac9f 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,3 +76,19 @@ config ARM_EXYNOS5250_CPUFREQ
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5250
 	  SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK
+	select CPU_FREQ_TABLE
+	select GENERIC_CPUFREQ_CPU0
+	select PM_OPP
+	select REGULATOR
+
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..9e8f12a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)     += omap-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
new file mode 100644
index 0000000..1f28fa6
--- /dev/null
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/mailbox.h>
+
+#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
+
+static int hb_voltage_change(unsigned int freq)
+{
+	int i;
+	u32 msg[7];
+
+	msg[0] = HB_CPUFREQ_CHANGE_NOTE;
+	msg[1] = freq / 1000000;
+	for (i = 2; i < 7; i++)
+		msg[i] = 0;
+
+	return pl320_ipc_transmit(msg);
+}
+
+static int hb_cpufreq_clk_notify(struct notifier_block *nb, 
+				unsigned long action, void *hclk)
+{
+	struct clk_notifier_data *clk_data = hclk;
+	int i = 0;
+
+	if (action == PRE_RATE_CHANGE) {
+		if (clk_data->new_rate > clk_data->old_rate)
+			while (hb_voltage_change(clk_data->new_rate))
+				if (i++ > 15)
+					return NOTIFY_STOP;
+	} else if (action == POST_RATE_CHANGE) {
+		if (clk_data->new_rate < clk_data->old_rate)
+			while (hb_voltage_change(clk_data->new_rate))
+				if (i++ > 15)
+					break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block hb_cpufreq_clk_nb = {
+	.notifier_call = hb_cpufreq_clk_notify,
+};
+
+static int hb_cpufreq_driver_init(void)
+{
+	struct device *cpu_dev;
+	struct clk *cpu_clk;
+	struct device_node *np;
+	int ret;
+
+	np = of_find_node_by_path("/cpus/cpu at 0");
+	if (!np) {
+		pr_err("failed to find highbank cpufreq node\n");
+		return -ENOENT;
+	}
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("failed to get highbank cpufreq device\n");
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	cpu_dev->of_node = np;
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		pr_err("failed to get cpu0 clock: %d\n", ret);
+		goto out_put_node;
+	}
+
+	ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
+	if (ret) {
+		pr_err("failed to register clk notifier: %d\n", ret);
+		goto out_put_node;
+	}
+
+out_put_node:
+	of_node_put(np);
+	return ret;
+}
+late_initcall(hb_cpufreq_driver_init);
+
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf at calxeda.com>");
+MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
+MODULE_LICENSE("GPL");
-- 
1.7.11.7




More information about the linux-arm-kernel mailing list