[PATCH v2 3/3] ARM/dts: omap3: Add support for IGEP COM Module

Enric Balletbo Serra eballetbo at gmail.com
Mon Dec 3 05:39:34 EST 2012


2012/11/30 Javier Martinez Canillas <javier.martinez at collabora.co.uk>:
> ISEE IGEP COM Module is an TI OMAP3 SoC computer on module.
>
> This patch adds an initial device tree support to boot an
> IGEP COM Module from the MMC/SD.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> Acked-by: Matthias Brugger <matthias.bgg at gmail.com>
> ---
>
> Changes since v1:
>     - Use default-state = "on" instead default-trigger = "default-on" for LED
>     - Update GPIO mapping according to latest IGEP COM Module rev.E instead D
>
>  arch/arm/boot/dts/Makefile           |    1 +
>  arch/arm/boot/dts/omap3-igep0030.dts |   44 ++++++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-igep0030.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 1dc0f39..78c99bc 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -67,6 +67,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>         omap3-evm.dtb \
>         omap3-tobi.dtb \
>         omap3-igep0020.dtb \
> +       omap3-igep0030.dtb \
>         omap4-panda.dtb \
>         omap4-pandaES.dtb \
>         omap4-var_som.dtb \
> diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
> new file mode 100644
> index 0000000..9dc48d2
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-igep0030.dts
> @@ -0,0 +1,44 @@
> +/*
> + * Device Tree Source for IGEP COM Module
> + *
> + * Copyright (C) 2012 Javier Martinez Canillas <javier at collabora.co.uk>
> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/include/ "omap3-igep.dtsi"
> +
> +/ {
> +       model = "IGEP COM Module";
> +       compatible = "isee,omap3-igep0030", "ti,omap3";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               boot {
> +                        label = "omap3:green:boot";
> +                        gpios = <&twl_gpio 13 1>;
> +                        default-state = "on";
> +               };
> +
> +               user0 {
> +                        label = "omap3:red:user0";
> +                        gpios = <&twl_gpio 18 1>; /* LEDA */
> +                        default-state = "off";
> +               };
> +
> +               user1 {
> +                        label = "omap3:green:user1";
> +                        gpios = <&twl_gpio 19 1>; /* LEDB */
> +                        default-state = "off";
> +               };
> +
> +               user2 {
> +                        label = "omap3:red:user1";
> +                        gpios = <&gpio1 16 1>;
> +                        default-state = "off";
> +               };
> +       };
> +};
> --
> 1.7.7.6
>

Tested-by: Enric Balletbo i Serra <eballetbo at gmail.com>



More information about the linux-arm-kernel mailing list