[PATCH 6/6] arm: l2x0: add aurora related properties to OF binding

Gregory CLEMENT gregory.clement at free-electrons.com
Fri Aug 24 05:09:21 EDT 2012


Aurora is a L2 Cache Controller designed to be compatible with the
L2x0 Cache Controller. L2X0 OF bindings are extended to support some
specificity of Aurora (no cache id part number available through
hardware, always write through mode, choice between outer cache and
system cache).

Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Yehuda Yitschak <yehuday at marvell.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
Cc: Barry Song <21cnbao at gmail.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Olof Johansson <olof at lixom.net>
---
 Documentation/devicetree/bindings/arm/l2cc.txt |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 7ca5216..1e41b8e 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -10,6 +10,12 @@ Required properties:
 	"arm,pl310-cache"
 	"arm,l220-cache"
 	"arm,l210-cache"
+	"marvell,aurora-cache-no-outer": Marvell Controller designed to be
+     compatible with the ARM one, with system cache mode (meaning
+     maintenance operations on L1 are broadcasted to the L2 and L2
+     performs the same operation).
+	"marvell,aurora-cache-with-outer": Marvell Controller designed to
+	be compatible with the ARM one with outer cache mode.
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped
@@ -29,6 +35,9 @@ Optional properties:
   filter. Addresses in the filter window are directed to the M1 port. Other
   addresses will go to the M0 port.
 - interrupts : 1 combined interrupt.
+- cache-id-part: cache id part number to be used if it is not present
+  on hardware
+- wt-override: If present then L2 is forced to Write through mode
 
 Example:
 
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list