[RFC PATCH 00/11 V4] MXS: Add i.MX28 USB Host driver
Marek Vasut
marex at denx.de
Sun Apr 22 08:59:16 EDT 2012
This patchset introduces the USB Host driver for i.MX28 CPU, utilising the
generic USB PHY infrastructure. Also added is glue code for CI13xxx driver, to
allow device mode. This patchset still does NOT support OTG mode, the
device/host mode is selected via platform data.
V2: Introduce stub imx-usb driver that then registers the PHY and EHCI drivers.
V3: Add the HCD on demand based on the PHY's state (only add HCD if it's host).
Currently, only the HOST mode is supported.
V4: * Introduce ci13xxx gadget glue
* Reorder patches in a more sensible order
* Introduce platform data, containing VBUS GPIO and port mode (device/gadget)
* Rename imx-usb to imx-otg
* Drop mx28evk usb host patch
* Use more devm_ function
* Rework the mxs-phy to register the same interrupt as ehci-mxs (and
effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use standard
ehci irq handling in ehci-mxs)
Marek Vasut (11):
MXS: Make clk_disable return integer
MXS: Add USB EHCI and USB PHY clock handling
MXS: Fixup i.MX233 USB base address name
MXS: Add data shared between imx-otg and EHCI driver
MXS: Modify the ci13xxx_udc to avoid adding UDC
MXS: Add small registration glue for ci13xxx_udc
MXS: Add separate MXS EHCI HCD driver
MXS: Add imx-otg driver
MXS: Add USB PHY driver
MXS: Add platform registration hooks for USB EHCI
MXS: Enable USB on M28EVK
arch/arm/mach-mxs/Kconfig | 2 +
arch/arm/mach-mxs/clock-mx28.c | 28 +-
arch/arm/mach-mxs/devices-mx28.h | 5 +
arch/arm/mach-mxs/devices/Kconfig | 3 +
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-usb.c | 84 +++++
arch/arm/mach-mxs/include/mach/clock.h | 2 +-
arch/arm/mach-mxs/include/mach/devices-common.h | 12 +
arch/arm/mach-mxs/include/mach/mx23.h | 8 +-
arch/arm/mach-mxs/mach-m28evk.c | 20 ++
drivers/usb/gadget/Kconfig | 17 +
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/ci13xxx_mxs.c | 67 ++++
drivers/usb/gadget/ci13xxx_udc.c | 12 +-
drivers/usb/gadget/ci13xxx_udc.h | 1 +
drivers/usb/host/Kconfig | 7 +
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-mxs.c | 197 ++++++++++
drivers/usb/otg/Kconfig | 16 +
drivers/usb/otg/Makefile | 2 +
drivers/usb/otg/imx-otg.c | 282 +++++++++++++++
drivers/usb/otg/mxs-phy.c | 438 +++++++++++++++++++++++
include/linux/fsl/mxs-usb.h | 46 +++
23 files changed, 1243 insertions(+), 13 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c
create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c
create mode 100644 drivers/usb/host/ehci-mxs.c
create mode 100644 drivers/usb/otg/imx-otg.c
create mode 100644 drivers/usb/otg/mxs-phy.c
create mode 100644 include/linux/fsl/mxs-usb.h
Cc: Chen Peter-B29397 <B29397 at freescale.com>
Cc: Detlev Zundel <dzu at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Li Frank-B20596 <B20596 at freescale.com>
Cc: Lin Tony-B19295 <B19295 at freescale.com>
Cc: Linux USB <linux-usb at vger.kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawn.guo at freescale.com>
Cc: Shawn Guo <shawn.guo at linaro.org>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Subodh Nijsure <snijsure at grid-net.com>
Cc: Tony Lin <tony.lin at freescale.com>
Cc: Wolfgang Denk <wd at denx.de>
NOTE: Adding this ci13xxx-mxs driver was really helpful, it helped me to realise
how this whole monster should look like in the end. Now the mxs-phy is
also much more prepared for the OTG operation.
--
1.7.9.5
More information about the linux-arm-kernel
mailing list