[RFC PATCH 00/10 V3] MXS: Add i.MX28 USB Host driver

[Sascha Hauer]

On Fri, Apr 20, 2012 at 04:13:56AM +0200, Marek Vasut wrote:
> > 
> > Cc: Chen Peter-B29397 <B29397 at freescale.com>
> > Cc: Detlev Zundel <dzu at denx.de>
> > Cc: Fabio Estevam <festevam at gmail.com>
> > Cc: Li Frank-B20596 <B20596 at freescale.com>
> > Cc: Lin Tony-B19295 <B19295 at freescale.com>
> > Cc: Linux USB <linux-usb at vger.kernel.org>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > Cc: Shawn Guo <shawn.guo at freescale.com>
> > Cc: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Stefano Babic <sbabic at denx.de>
> > Cc: Subodh Nijsure <snijsure at grid-net.com>
> > Cc: Tony Lin <tony.lin at freescale.com>
> > Cc: Wolfgang Denk <wd at denx.de>
> 
> btw /wrt USB Gadget etc -- how does the drivers/usb/gadget/fsl_udc_core.c and 
> drivers/usb/gadget/ci13xxx_* fit into the big picture? We're gonna use the 
> ci13xxx stuff for Gadget on mx28, correct? Then how does fsl_udc_core.c fit in?

>From what I have been told by a collegue the ci13xxx driver works
better, and from what I have seen the code looks better. So I think mxs
should use it. i.MX can then use it later aswell. We won't need the
fsl_udc_core driver anymore then.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |