[PATCH v2] mmc: remove imxmmc driver

Sascha Hauer s.hauer at pengutronix.de
Wed Apr 11 16:24:49 EDT 2012


This driver is broken since 2.6.31 when the traditional i.MX1
support was removed.

In theory the i.MX1 mmc controller can be supported by the mxcmmc
driver which basically is the same hardware. However, the i.MX1
controller has severe bugs which made several workarounds necessary which
resulted in a different driver structure. At that time it seemed easier
to write a second driver to support hardware without bugs.

As noone cared for the i.MX1 driver for a long time and it does
not compile, remove it.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---

v2: Also remove imxmmc.h

 drivers/mmc/host/Kconfig  |   10 -
 drivers/mmc/host/Makefile |    1 -
 drivers/mmc/host/imxmmc.c | 1169 ---------------------------------------------
 drivers/mmc/host/imxmmc.h |   64 ---
 4 files changed, 1244 deletions(-)
 delete mode 100644 drivers/mmc/host/imxmmc.c
 delete mode 100644 drivers/mmc/host/imxmmc.h

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 2bc06e7..9f1f5e2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -307,16 +307,6 @@ config MMC_ATMELMCI_DMA
 
 	  If unsure, say N.
 
-config MMC_IMX
-	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_MX1
-	help
-	  This selects the Motorola i.MX Multimedia card Interface.
-	  If you have a i.MX platform with a Multimedia Card slot,
-	  say Y or M here.
-
-	  If unsure, say N.
-
 config MMC_MSM
 	tristate "Qualcomm SDCC Controller Support"
 	depends on MMC && ARCH_MSM
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3e7e26d..8922b06 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -4,7 +4,6 @@
 
 obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
-obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
 obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
deleted file mode 100644
index ea0f3ce..0000000
--- a/drivers/mmc/host/imxmmc.c
+++ /dev/null
@@ -1,1169 +0,0 @@
-/*
- *  linux/drivers/mmc/host/imxmmc.c - Motorola i.MX MMCI driver
- *
- *  Copyright (C) 2004 Sascha Hauer, Pengutronix <sascha at saschahauer.de>
- *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa at pikron.com>
- *
- *  derived from pxamci.c by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <mach/mmc.h>
-#include <mach/imx-dma.h>
-
-#include "imxmmc.h"
-
-#define DRIVER_NAME "imx-mmc"
-
-#define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \
-				 INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \
-				 INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO)
-
-struct imxmci_host {
-	struct mmc_host		*mmc;
-	spinlock_t		lock;
-	struct resource		*res;
-	void __iomem		*base;
-	int			irq;
-	imx_dmach_t		dma;
-	volatile unsigned int	imask;
-	unsigned int		power_mode;
-	unsigned int		present;
-	struct imxmmc_platform_data *pdata;
-
-	struct mmc_request	*req;
-	struct mmc_command	*cmd;
-	struct mmc_data		*data;
-
-	struct timer_list	timer;
-	struct tasklet_struct	tasklet;
-	unsigned int		status_reg;
-	unsigned long		pending_events;
-	/* Next two fields are there for CPU driven transfers to overcome SDHC deficiencies */
-	u16			*data_ptr;
-	unsigned int		data_cnt;
-	atomic_t		stuck_timeout;
-
-	unsigned int		dma_nents;
-	unsigned int		dma_size;
-	unsigned int		dma_dir;
-	int			dma_allocated;
-
-	unsigned char		actual_bus_width;
-
-	int			prev_cmd_code;
-
-	struct clk		*clk;
-};
-
-#define IMXMCI_PEND_IRQ_b	0
-#define IMXMCI_PEND_DMA_END_b	1
-#define IMXMCI_PEND_DMA_ERR_b	2
-#define IMXMCI_PEND_WAIT_RESP_b	3
-#define IMXMCI_PEND_DMA_DATA_b	4
-#define IMXMCI_PEND_CPU_DATA_b	5
-#define IMXMCI_PEND_CARD_XCHG_b	6
-#define IMXMCI_PEND_SET_INIT_b	7
-#define IMXMCI_PEND_STARTED_b	8
-
-#define IMXMCI_PEND_IRQ_m	(1 << IMXMCI_PEND_IRQ_b)
-#define IMXMCI_PEND_DMA_END_m	(1 << IMXMCI_PEND_DMA_END_b)
-#define IMXMCI_PEND_DMA_ERR_m	(1 << IMXMCI_PEND_DMA_ERR_b)
-#define IMXMCI_PEND_WAIT_RESP_m	(1 << IMXMCI_PEND_WAIT_RESP_b)
-#define IMXMCI_PEND_DMA_DATA_m	(1 << IMXMCI_PEND_DMA_DATA_b)
-#define IMXMCI_PEND_CPU_DATA_m	(1 << IMXMCI_PEND_CPU_DATA_b)
-#define IMXMCI_PEND_CARD_XCHG_m	(1 << IMXMCI_PEND_CARD_XCHG_b)
-#define IMXMCI_PEND_SET_INIT_m	(1 << IMXMCI_PEND_SET_INIT_b)
-#define IMXMCI_PEND_STARTED_m	(1 << IMXMCI_PEND_STARTED_b)
-
-static void imxmci_stop_clock(struct imxmci_host *host)
-{
-	int i = 0;
-	u16 reg;
-
-	reg = readw(host->base + MMC_REG_STR_STP_CLK);
-	writew(reg & ~STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
-	while (i < 0x1000) {
-		if (!(i & 0x7f)) {
-			reg = readw(host->base + MMC_REG_STR_STP_CLK);
-			writew(reg | STR_STP_CLK_STOP_CLK,
-					host->base + MMC_REG_STR_STP_CLK);
-		}
-
-		reg = readw(host->base + MMC_REG_STATUS);
-		if (!(reg & STATUS_CARD_BUS_CLK_RUN)) {
-			/* Check twice before cut */
-			reg = readw(host->base + MMC_REG_STATUS);
-			if (!(reg & STATUS_CARD_BUS_CLK_RUN))
-				return;
-		}
-
-		i++;
-	}
-	dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
-}
-
-static int imxmci_start_clock(struct imxmci_host *host)
-{
-	unsigned int trials = 0;
-	unsigned int delay_limit = 128;
-	unsigned long flags;
-	u16 reg;
-
-	reg = readw(host->base + MMC_REG_STR_STP_CLK);
-	writew(reg & ~STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
-
-	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
-
-	/*
-	 * Command start of the clock, this usually succeeds in less
-	 * then 6 delay loops, but during card detection (low clockrate)
-	 * it takes up to 5000 delay loops and sometimes fails for the first time
-	 */
-	reg = readw(host->base + MMC_REG_STR_STP_CLK);
-	writew(reg | STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
-
-	do {
-		unsigned int delay = delay_limit;
-
-		while (delay--) {
-			reg = readw(host->base + MMC_REG_STATUS);
-			if (reg & STATUS_CARD_BUS_CLK_RUN) {
-				/* Check twice before cut */
-				reg = readw(host->base + MMC_REG_STATUS);
-				if (reg & STATUS_CARD_BUS_CLK_RUN)
-					return 0;
-			}
-
-			if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
-				return 0;
-		}
-
-		local_irq_save(flags);
-		/*
-		 * Ensure, that request is not doubled under all possible circumstances.
-		 * It is possible, that cock running state is missed, because some other
-		 * IRQ or schedule delays this function execution and the clocks has
-		 * been already stopped by other means (response processing, SDHC HW)
-		 */
-		if (!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) {
-			reg = readw(host->base + MMC_REG_STR_STP_CLK);
-			writew(reg | STR_STP_CLK_START_CLK,
-					host->base + MMC_REG_STR_STP_CLK);
-		}
-		local_irq_restore(flags);
-
-	} while (++trials < 256);
-
-	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
-
-	return -1;
-}
-
-static void imxmci_softreset(struct imxmci_host *host)
-{
-	int i;
-
-	/* reset sequence */
-	writew(0x08, host->base + MMC_REG_STR_STP_CLK);
-	writew(0x0D, host->base + MMC_REG_STR_STP_CLK);
-
-	for (i = 0; i < 8; i++)
-		writew(0x05, host->base + MMC_REG_STR_STP_CLK);
-
-	writew(0xff, host->base + MMC_REG_RES_TO);
-	writew(512, host->base + MMC_REG_BLK_LEN);
-	writew(1, host->base + MMC_REG_NOB);
-}
-
-static int imxmci_busy_wait_for_status(struct imxmci_host *host,
-				       unsigned int *pstat, unsigned int stat_mask,
-				       int timeout, const char *where)
-{
-	int loops = 0;
-
-	while (!(*pstat & stat_mask)) {
-		loops += 2;
-		if (loops >= timeout) {
-			dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n",
-				where, *pstat, stat_mask);
-			return -1;
-		}
-		udelay(2);
-		*pstat |= readw(host->base + MMC_REG_STATUS);
-	}
-	if (!loops)
-		return 0;
-
-	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
-	if (!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock >= 8000000))
-		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-			 loops, where, *pstat, stat_mask);
-	return loops;
-}
-
-static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
-{
-	unsigned int nob = data->blocks;
-	unsigned int blksz = data->blksz;
-	unsigned int datasz = nob * blksz;
-	int i;
-
-	if (data->flags & MMC_DATA_STREAM)
-		nob = 0xffff;
-
-	host->data = data;
-	data->bytes_xfered = 0;
-
-	writew(nob, host->base + MMC_REG_NOB);
-	writew(blksz, host->base + MMC_REG_BLK_LEN);
-
-	/*
-	 * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise.
-	 * We are in big troubles for non-512 byte transfers according to note in the paragraph
-	 * 20.6.7 of User Manual anyway, but we need to be able to transfer SCR at least.
-	 * The situation is even more complex in reality. The SDHC in not able to handle wll
-	 * partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
-	 * This is required for SCR read at least.
-	 */
-	if (datasz < 512) {
-		host->dma_size = datasz;
-		if (data->flags & MMC_DATA_READ) {
-			host->dma_dir = DMA_FROM_DEVICE;
-
-			/* Hack to enable read SCR */
-			writew(1, host->base + MMC_REG_NOB);
-			writew(512, host->base + MMC_REG_BLK_LEN);
-		} else {
-			host->dma_dir = DMA_TO_DEVICE;
-		}
-
-		/* Convert back to virtual address */
-		host->data_ptr = (u16 *)sg_virt(data->sg);
-		host->data_cnt = 0;
-
-		clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
-		set_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
-
-		return;
-	}
-
-	if (data->flags & MMC_DATA_READ) {
-		host->dma_dir = DMA_FROM_DEVICE;
-		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
-					     data->sg_len,  host->dma_dir);
-
-		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
-				 host->res->start + MMC_REG_BUFFER_ACCESS,
-				 DMA_MODE_READ);
-
-		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/
-		CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN;
-	} else {
-		host->dma_dir = DMA_TO_DEVICE;
-
-		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
-					     data->sg_len,  host->dma_dir);
-
-		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
-				 host->res->start + MMC_REG_BUFFER_ACCESS,
-				 DMA_MODE_WRITE);
-
-		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/
-		CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN;
-	}
-
-#if 1	/* This code is there only for consistency checking and can be disabled in future */
-	host->dma_size = 0;
-	for (i = 0; i < host->dma_nents; i++)
-		host->dma_size += data->sg[i].length;
-
-	if (datasz > host->dma_size) {
-		dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n",
-			datasz, host->dma_size);
-	}
-#endif
-
-	host->dma_size = datasz;
-
-	wmb();
-
-	set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
-	clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
-
-	/* start DMA engine for read, write is delayed after initial response */
-	if (host->dma_dir == DMA_FROM_DEVICE)
-		imx_dma_enable(host->dma);
-}
-
-static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat)
-{
-	unsigned long flags;
-	u32 imask;
-
-	WARN_ON(host->cmd != NULL);
-	host->cmd = cmd;
-
-	/* Ensure, that clock are stopped else command programming and start fails */
-	imxmci_stop_clock(host);
-
-	if (cmd->flags & MMC_RSP_BUSY)
-		cmdat |= CMD_DAT_CONT_BUSY;
-
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_R1: /* short CRC, OPCODE */
-	case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
-		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1;
-		break;
-	case MMC_RSP_R2: /* long 136 bit + CRC */
-		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2;
-		break;
-	case MMC_RSP_R3: /* short */
-		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
-		break;
-	default:
-		break;
-	}
-
-	if (test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events))
-		cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */
-
-	if (host->actual_bus_width == MMC_BUS_WIDTH_4)
-		cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
-
-	writew(cmd->opcode, host->base + MMC_REG_CMD);
-	writew(cmd->arg >> 16, host->base + MMC_REG_ARGH);
-	writew(cmd->arg & 0xffff, host->base + MMC_REG_ARGL);
-	writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
-
-	atomic_set(&host->stuck_timeout, 0);
-	set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events);
-
-
-	imask = IMXMCI_INT_MASK_DEFAULT;
-	imask &= ~INT_MASK_END_CMD_RES;
-	if (cmdat & CMD_DAT_CONT_DATA_ENABLE) {
-		/* imask &= ~INT_MASK_BUF_READY; */
-		imask &= ~INT_MASK_DATA_TRAN;
-		if (cmdat & CMD_DAT_CONT_WRITE)
-			imask &= ~INT_MASK_WRITE_OP_DONE;
-		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
-			imask &= ~INT_MASK_BUF_READY;
-	}
-
-	spin_lock_irqsave(&host->lock, flags);
-	host->imask = imask;
-	writew(host->imask, host->base + MMC_REG_INT_MASK);
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n",
-		cmd->opcode, cmd->opcode, imask);
-
-	imxmci_start_clock(host);
-}
-
-static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *req)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-
-	host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m |
-				  IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m);
-
-	host->imask = IMXMCI_INT_MASK_DEFAULT;
-	writew(host->imask, host->base + MMC_REG_INT_MASK);
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	if (req && req->cmd)
-		host->prev_cmd_code = req->cmd->opcode;
-
-	host->req = NULL;
-	host->cmd = NULL;
-	host->data = NULL;
-	mmc_request_done(host->mmc, req);
-}
-
-static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat)
-{
-	struct mmc_data *data = host->data;
-	int data_error;
-
-	if (test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
-		imx_dma_disable(host->dma);
-		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
-			     host->dma_dir);
-	}
-
-	if (stat & STATUS_ERR_MASK) {
-		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", stat);
-		if (stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR))
-			data->error = -EILSEQ;
-		else if (stat & STATUS_TIME_OUT_READ)
-			data->error = -ETIMEDOUT;
-		else
-			data->error = -EIO;
-	} else {
-		data->bytes_xfered = host->dma_size;
-	}
-
-	data_error = data->error;
-
-	host->data = NULL;
-
-	return data_error;
-}
-
-static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
-{
-	struct mmc_command *cmd = host->cmd;
-	int i;
-	u32 a, b, c;
-	struct mmc_data *data = host->data;
-
-	if (!cmd)
-		return 0;
-
-	host->cmd = NULL;
-
-	if (stat & STATUS_TIME_OUT_RESP) {
-		dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
-		cmd->error = -ETIMEDOUT;
-	} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
-		dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
-		cmd->error = -EILSEQ;
-	}
-
-	if (cmd->flags & MMC_RSP_PRESENT) {
-		if (cmd->flags & MMC_RSP_136) {
-			for (i = 0; i < 4; i++) {
-				a = readw(host->base + MMC_REG_RES_FIFO);
-				b = readw(host->base + MMC_REG_RES_FIFO);
-				cmd->resp[i] = a << 16 | b;
-			}
-		} else {
-			a = readw(host->base + MMC_REG_RES_FIFO);
-			b = readw(host->base + MMC_REG_RES_FIFO);
-			c = readw(host->base + MMC_REG_RES_FIFO);
-			cmd->resp[0] = a << 24 | b << 8 | c >> 8;
-		}
-	}
-
-	dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n",
-		cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
-
-	if (data && !cmd->error && !(stat & STATUS_ERR_MASK)) {
-		if (host->req->data->flags & MMC_DATA_WRITE) {
-
-			/* Wait for FIFO to be empty before starting DMA write */
-
-			stat = readw(host->base + MMC_REG_STATUS);
-			if (imxmci_busy_wait_for_status(host, &stat,
-							STATUS_APPL_BUFF_FE,
-							40, "imxmci_cmd_done DMA WR") < 0) {
-				cmd->error = -EIO;
-				imxmci_finish_data(host, stat);
-				if (host->req)
-					imxmci_finish_request(host, host->req);
-				dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n",
-					 stat);
-				return 0;
-			}
-
-			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
-				imx_dma_enable(host->dma);
-		}
-	} else {
-		struct mmc_request *req;
-		imxmci_stop_clock(host);
-		req = host->req;
-
-		if (data)
-			imxmci_finish_data(host, stat);
-
-		if (req)
-			imxmci_finish_request(host, req);
-		else
-			dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n");
-	}
-
-	return 1;
-}
-
-static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
-{
-	struct mmc_data *data = host->data;
-	int data_error;
-
-	if (!data)
-		return 0;
-
-	data_error = imxmci_finish_data(host, stat);
-
-	if (host->req->stop) {
-		imxmci_stop_clock(host);
-		imxmci_start_cmd(host, host->req->stop, 0);
-	} else {
-		struct mmc_request *req;
-		req = host->req;
-		if (req)
-			imxmci_finish_request(host, req);
-		else
-			dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n");
-	}
-
-	return 1;
-}
-
-static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
-{
-	int i;
-	int burst_len;
-	int trans_done = 0;
-	unsigned int stat = *pstat;
-
-	if (host->actual_bus_width != MMC_BUS_WIDTH_4)
-		burst_len = 16;
-	else
-		burst_len = 64;
-
-	/* This is unfortunately required */
-	dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
-		stat);
-
-	udelay(20);	/* required for clocks < 8MHz*/
-
-	if (host->dma_dir == DMA_FROM_DEVICE) {
-		imxmci_busy_wait_for_status(host, &stat,
-					    STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE |
-					    STATUS_TIME_OUT_READ,
-					    50, "imxmci_cpu_driven_data read");
-
-		while ((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) &&
-		       !(stat & STATUS_TIME_OUT_READ) &&
-		       (host->data_cnt < 512)) {
-
-			udelay(20);	/* required for clocks < 8MHz*/
-
-			for (i = burst_len; i >= 2 ; i -= 2) {
-				u16 data;
-				data = readw(host->base + MMC_REG_BUFFER_ACCESS);
-				udelay(10);	/* required for clocks < 8MHz*/
-				if (host->data_cnt+2 <= host->dma_size) {
-					*(host->data_ptr++) = data;
-				} else {
-					if (host->data_cnt < host->dma_size)
-						*(u8 *)(host->data_ptr) = data;
-				}
-				host->data_cnt += 2;
-			}
-
-			stat = readw(host->base + MMC_REG_STATUS);
-
-			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
-				host->data_cnt, burst_len, stat);
-		}
-
-		if ((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
-			trans_done = 1;
-
-		if (host->dma_size & 0x1ff)
-			stat &= ~STATUS_CRC_READ_ERR;
-
-		if (stat & STATUS_TIME_OUT_READ) {
-			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n",
-				stat);
-			trans_done = -1;
-		}
-
-	} else {
-		imxmci_busy_wait_for_status(host, &stat,
-					    STATUS_APPL_BUFF_FE,
-					    20, "imxmci_cpu_driven_data write");
-
-		while ((stat & STATUS_APPL_BUFF_FE) &&
-		       (host->data_cnt < host->dma_size)) {
-			if (burst_len >= host->dma_size - host->data_cnt) {
-				burst_len = host->dma_size - host->data_cnt;
-				host->data_cnt = host->dma_size;
-				trans_done = 1;
-			} else {
-				host->data_cnt += burst_len;
-			}
-
-			for (i = burst_len; i > 0 ; i -= 2)
-				writew(*(host->data_ptr++), host->base + MMC_REG_BUFFER_ACCESS);
-
-			stat = readw(host->base + MMC_REG_STATUS);
-
-			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n",
-				burst_len, stat);
-		}
-	}
-
-	*pstat = stat;
-
-	return trans_done;
-}
-
-static void imxmci_dma_irq(int dma, void *devid)
-{
-	struct imxmci_host *host = devid;
-	u32 stat = readw(host->base + MMC_REG_STATUS);
-
-	atomic_set(&host->stuck_timeout, 0);
-	host->status_reg = stat;
-	set_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
-	tasklet_schedule(&host->tasklet);
-}
-
-static irqreturn_t imxmci_irq(int irq, void *devid)
-{
-	struct imxmci_host *host = devid;
-	u32 stat = readw(host->base + MMC_REG_STATUS);
-	int handled = 1;
-
-	writew(host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT,
-			host->base + MMC_REG_INT_MASK);
-
-	atomic_set(&host->stuck_timeout, 0);
-	host->status_reg = stat;
-	set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
-	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
-	tasklet_schedule(&host->tasklet);
-
-	return IRQ_RETVAL(handled);
-}
-
-static void imxmci_tasklet_fnc(unsigned long data)
-{
-	struct imxmci_host *host = (struct imxmci_host *)data;
-	u32 stat;
-	unsigned int data_dir_mask = 0;	/* STATUS_WR_CRC_ERROR_CODE_MASK */
-	int timeout = 0;
-
-	if (atomic_read(&host->stuck_timeout) > 4) {
-		char *what;
-		timeout = 1;
-		stat = readw(host->base + MMC_REG_STATUS);
-		host->status_reg = stat;
-		if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
-			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
-				what = "RESP+DMA";
-			else
-				what = "RESP";
-		else
-			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
-				if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events))
-					what = "DATA";
-				else
-					what = "DMA";
-			else
-				what = "???";
-
-		dev_err(mmc_dev(host->mmc),
-			"%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n",
-			what, stat,
-			readw(host->base + MMC_REG_INT_MASK));
-		dev_err(mmc_dev(host->mmc),
-			"CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
-			readw(host->base + MMC_REG_CMD_DAT_CONT),
-			readw(host->base + MMC_REG_BLK_LEN),
-			readw(host->base + MMC_REG_NOB),
-			CCR(host->dma));
-		dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
-			host->cmd ? host->cmd->opcode : 0,
-			host->prev_cmd_code,
-			1 << host->actual_bus_width, host->dma_size);
-	}
-
-	if (!host->present || timeout)
-		host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ |
-			STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR;
-
-	if (test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) {
-		clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
-
-		stat = readw(host->base + MMC_REG_STATUS);
-		/*
-		 * This is not required in theory, but there is chance to miss some flag
-		 * which clears automatically by mask write, FreeScale original code keeps
-		 * stat from IRQ time so do I
-		 */
-		stat |= host->status_reg;
-
-		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
-			stat &= ~STATUS_CRC_READ_ERR;
-
-		if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
-			imxmci_busy_wait_for_status(host, &stat,
-						    STATUS_END_CMD_RESP | STATUS_ERR_MASK,
-						    20, "imxmci_tasklet_fnc resp (ERRATUM #4)");
-		}
-
-		if (stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) {
-			if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
-				imxmci_cmd_done(host, stat);
-			if (host->data && (stat & STATUS_ERR_MASK))
-				imxmci_data_done(host, stat);
-		}
-
-		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) {
-			stat |= readw(host->base + MMC_REG_STATUS);
-			if (imxmci_cpu_driven_data(host, &stat)) {
-				if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
-					imxmci_cmd_done(host, stat);
-				atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m,
-						  &host->pending_events);
-				imxmci_data_done(host, stat);
-			}
-		}
-	}
-
-	if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) &&
-	    !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
-
-		stat = readw(host->base + MMC_REG_STATUS);
-		/* Same as above */
-		stat |= host->status_reg;
-
-		if (host->dma_dir == DMA_TO_DEVICE)
-			data_dir_mask = STATUS_WRITE_OP_DONE;
-		else
-			data_dir_mask = STATUS_DATA_TRANS_DONE;
-
-		if (stat & data_dir_mask) {
-			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
-			imxmci_data_done(host, stat);
-		}
-	}
-
-	if (test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) {
-
-		if (host->cmd)
-			imxmci_cmd_done(host, STATUS_TIME_OUT_RESP);
-
-		if (host->data)
-			imxmci_data_done(host, STATUS_TIME_OUT_READ |
-					 STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR);
-
-		if (host->req)
-			imxmci_finish_request(host, host->req);
-
-		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-
-	}
-}
-
-static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req)
-{
-	struct imxmci_host *host = mmc_priv(mmc);
-	unsigned int cmdat;
-
-	WARN_ON(host->req != NULL);
-
-	host->req = req;
-
-	cmdat = 0;
-
-	if (req->data) {
-		imxmci_setup_data(host, req->data);
-
-		cmdat |= CMD_DAT_CONT_DATA_ENABLE;
-
-		if (req->data->flags & MMC_DATA_WRITE)
-			cmdat |= CMD_DAT_CONT_WRITE;
-
-		if (req->data->flags & MMC_DATA_STREAM)
-			cmdat |= CMD_DAT_CONT_STREAM_BLOCK;
-	}
-
-	imxmci_start_cmd(host, req->cmd, cmdat);
-}
-
-#define CLK_RATE 19200000
-
-static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	struct imxmci_host *host = mmc_priv(mmc);
-	int prescaler;
-
-	if (ios->bus_width == MMC_BUS_WIDTH_4) {
-		host->actual_bus_width = MMC_BUS_WIDTH_4;
-		imx_gpio_mode(PB11_PF_SD_DAT3);
-		BLR(host->dma) = 0;	/* burst 64 byte read/write */
-	} else {
-		host->actual_bus_width = MMC_BUS_WIDTH_1;
-		imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
-		BLR(host->dma) = 16;	/* burst 16 byte read/write */
-	}
-
-	if (host->power_mode != ios->power_mode) {
-		switch (ios->power_mode) {
-		case MMC_POWER_OFF:
-			break;
-		case MMC_POWER_UP:
-			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
-			break;
-		case MMC_POWER_ON:
-			break;
-		}
-		host->power_mode = ios->power_mode;
-	}
-
-	if (ios->clock) {
-		unsigned int clk;
-		u16 reg;
-
-		/* The prescaler is 5 for PERCLK2 equal to 96MHz
-		 * then 96MHz / 5 = 19.2 MHz
-		 */
-		clk = clk_get_rate(host->clk);
-		prescaler = (clk + (CLK_RATE * 7) / 8) / CLK_RATE;
-		switch (prescaler) {
-		case 0:
-		case 1:	prescaler = 0;
-			break;
-		case 2:	prescaler = 1;
-			break;
-		case 3:	prescaler = 2;
-			break;
-		case 4:	prescaler = 4;
-			break;
-		default:
-		case 5:	prescaler = 5;
-			break;
-		}
-
-		dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n",
-			clk, prescaler);
-
-		for (clk = 0; clk < 8; clk++) {
-			int x;
-			x = CLK_RATE / (1 << clk);
-			if (x <= ios->clock)
-				break;
-		}
-
-		/* enable controller */
-		reg = readw(host->base + MMC_REG_STR_STP_CLK);
-		writew(reg | STR_STP_CLK_ENABLE,
-				host->base + MMC_REG_STR_STP_CLK);
-
-		imxmci_stop_clock(host);
-		writew((prescaler << 3) | clk, host->base + MMC_REG_CLK_RATE);
-		/*
-		 * Under my understanding, clock should not be started there, because it would
-		 * initiate SDHC sequencer and send last or random command into card
-		 */
-		/* imxmci_start_clock(host); */
-
-		dev_dbg(mmc_dev(host->mmc),
-			"MMC_CLK_RATE: 0x%08x\n",
-			readw(host->base + MMC_REG_CLK_RATE));
-	} else {
-		imxmci_stop_clock(host);
-	}
-}
-
-static int imxmci_get_ro(struct mmc_host *mmc)
-{
-	struct imxmci_host *host = mmc_priv(mmc);
-
-	if (host->pdata && host->pdata->get_ro)
-		return !!host->pdata->get_ro(mmc_dev(mmc));
-	/*
-	 * Board doesn't support read only detection; let the mmc core
-	 * decide what to do.
-	 */
-	return -ENOSYS;
-}
-
-
-static const struct mmc_host_ops imxmci_ops = {
-	.request	= imxmci_request,
-	.set_ios	= imxmci_set_ios,
-	.get_ro		= imxmci_get_ro,
-};
-
-static void imxmci_check_status(unsigned long data)
-{
-	struct imxmci_host *host = (struct imxmci_host *)data;
-
-	if (host->pdata && host->pdata->card_present &&
-	    host->pdata->card_present(mmc_dev(host->mmc)) != host->present) {
-		host->present ^= 1;
-		dev_info(mmc_dev(host->mmc), "card %s\n",
-		      host->present ? "inserted" : "removed");
-
-		set_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events);
-		tasklet_schedule(&host->tasklet);
-	}
-
-	if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) ||
-	    test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
-		atomic_inc(&host->stuck_timeout);
-		if (atomic_read(&host->stuck_timeout) > 4)
-			tasklet_schedule(&host->tasklet);
-	} else {
-		atomic_set(&host->stuck_timeout, 0);
-
-	}
-
-	mod_timer(&host->timer, jiffies + (HZ>>1));
-}
-
-static int __init imxmci_probe(struct platform_device *pdev)
-{
-	struct mmc_host *mmc;
-	struct imxmci_host *host = NULL;
-	struct resource *r;
-	int ret = 0, irq;
-	u16 rev_no;
-
-	pr_info("i.MX mmc driver\n");
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(pdev, 0);
-	if (!r || irq < 0)
-		return -ENXIO;
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (!r)
-		return -EBUSY;
-
-	mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	mmc->ops = &imxmci_ops;
-	mmc->f_min = 150000;
-	mmc->f_max = CLK_RATE/2;
-	mmc->ocr_avail = MMC_VDD_32_33;
-	mmc->caps = MMC_CAP_4_BIT_DATA;
-
-	/* MMC core transfer sizes tunable parameters */
-	mmc->max_segs = 64;
-	mmc->max_seg_size = 64*512;	/* default PAGE_CACHE_SIZE */
-	mmc->max_req_size = 64*512;	/* default PAGE_CACHE_SIZE */
-	mmc->max_blk_size = 2048;
-	mmc->max_blk_count = 65535;
-
-	host = mmc_priv(mmc);
-	host->base = ioremap(r->start, resource_size(r));
-	if (!host->base) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	host->mmc = mmc;
-	host->dma_allocated = 0;
-	host->pdata = pdev->dev.platform_data;
-	if (!host->pdata)
-		dev_warn(&pdev->dev, "No platform data provided!\n");
-
-	spin_lock_init(&host->lock);
-	host->res = r;
-	host->irq = irq;
-
-	host->clk = clk_get(&pdev->dev, "perclk2");
-	if (IS_ERR(host->clk)) {
-		ret = PTR_ERR(host->clk);
-		goto out;
-	}
-	clk_enable(host->clk);
-
-	imx_gpio_mode(PB8_PF_SD_DAT0);
-	imx_gpio_mode(PB9_PF_SD_DAT1);
-	imx_gpio_mode(PB10_PF_SD_DAT2);
-	/* Configured as GPIO with pull-up to ensure right MCC card mode */
-	/* Switched to PB11_PF_SD_DAT3 if 4 bit bus is configured */
-	imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
-	/* imx_gpio_mode(PB11_PF_SD_DAT3); */
-	imx_gpio_mode(PB12_PF_SD_CLK);
-	imx_gpio_mode(PB13_PF_SD_CMD);
-
-	imxmci_softreset(host);
-
-	rev_no = readw(host->base + MMC_REG_REV_NO);
-	if (rev_no != 0x390) {
-		dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
-			readw(host->base + MMC_REG_REV_NO));
-		goto out;
-	}
-
-	/* recommended in data sheet */
-	writew(0x2db4, host->base + MMC_REG_READ_TO);
-
-	host->imask = IMXMCI_INT_MASK_DEFAULT;
-	writew(host->imask, host->base + MMC_REG_INT_MASK);
-
-	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
-	if(host->dma < 0) {
-		dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
-		ret = -EBUSY;
-		goto out;
-	}
-	host->dma_allocated = 1;
-	imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host);
-	RSSR(host->dma) = DMA_REQ_SDHC;
-
-	tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host);
-	host->status_reg=0;
-	host->pending_events=0;
-
-	ret = request_irq(host->irq, imxmci_irq, 0, DRIVER_NAME, host);
-	if (ret)
-		goto out;
-
-	if (host->pdata && host->pdata->card_present)
-		host->present = host->pdata->card_present(mmc_dev(mmc));
-	else	/* if there is no way to detect assume that card is present */
-		host->present = 1;
-
-	init_timer(&host->timer);
-	host->timer.data = (unsigned long)host;
-	host->timer.function = imxmci_check_status;
-	add_timer(&host->timer);
-	mod_timer(&host->timer, jiffies + (HZ >> 1));
-
-	platform_set_drvdata(pdev, mmc);
-
-	mmc_add_host(mmc);
-
-	return 0;
-
-out:
-	if (host) {
-		if (host->dma_allocated) {
-			imx_dma_free(host->dma);
-			host->dma_allocated = 0;
-		}
-		if (host->clk) {
-			clk_disable(host->clk);
-			clk_put(host->clk);
-		}
-		if (host->base)
-			iounmap(host->base);
-	}
-	if (mmc)
-		mmc_free_host(mmc);
-	release_mem_region(r->start, resource_size(r));
-	return ret;
-}
-
-static int __exit imxmci_remove(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (mmc) {
-		struct imxmci_host *host = mmc_priv(mmc);
-
-		tasklet_disable(&host->tasklet);
-
-		del_timer_sync(&host->timer);
-		mmc_remove_host(mmc);
-
-		free_irq(host->irq, host);
-		iounmap(host->base);
-		if (host->dma_allocated) {
-			imx_dma_free(host->dma);
-			host->dma_allocated = 0;
-		}
-
-		tasklet_kill(&host->tasklet);
-
-		clk_disable(host->clk);
-		clk_put(host->clk);
-
-		release_mem_region(host->res->start, resource_size(host->res));
-
-		mmc_free_host(mmc);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int imxmci_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	int ret = 0;
-
-	if (mmc)
-		ret = mmc_suspend_host(mmc);
-
-	return ret;
-}
-
-static int imxmci_resume(struct platform_device *dev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct imxmci_host *host;
-	int ret = 0;
-
-	if (mmc) {
-		host = mmc_priv(mmc);
-		if (host)
-			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
-		ret = mmc_resume_host(mmc);
-	}
-
-	return ret;
-}
-#else
-#define imxmci_suspend  NULL
-#define imxmci_resume   NULL
-#endif /* CONFIG_PM */
-
-static struct platform_driver imxmci_driver = {
-	.remove		= __exit_p(imxmci_remove),
-	.suspend	= imxmci_suspend,
-	.resume		= imxmci_resume,
-	.driver		= {
-		.name		= DRIVER_NAME,
-		.owner		= THIS_MODULE,
-	}
-};
-
-static int __init imxmci_init(void)
-{
-	return platform_driver_probe(&imxmci_driver, imxmci_probe);
-}
-
-static void __exit imxmci_exit(void)
-{
-	platform_driver_unregister(&imxmci_driver);
-}
-
-module_init(imxmci_init);
-module_exit(imxmci_exit);
-
-MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
-MODULE_AUTHOR("Sascha Hauer, Pengutronix");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:imx-mmc");
diff --git a/drivers/mmc/host/imxmmc.h b/drivers/mmc/host/imxmmc.h
deleted file mode 100644
index 09d5d4e..0000000
--- a/drivers/mmc/host/imxmmc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#define MMC_REG_STR_STP_CLK		0x00
-#define MMC_REG_STATUS			0x04
-#define MMC_REG_CLK_RATE		0x08
-#define MMC_REG_CMD_DAT_CONT		0x0C
-#define MMC_REG_RES_TO			0x10
-#define MMC_REG_READ_TO			0x14
-#define MMC_REG_BLK_LEN			0x18
-#define MMC_REG_NOB			0x1C
-#define MMC_REG_REV_NO			0x20
-#define MMC_REG_INT_MASK		0x24
-#define MMC_REG_CMD			0x28
-#define MMC_REG_ARGH			0x2C
-#define MMC_REG_ARGL			0x30
-#define MMC_REG_RES_FIFO		0x34
-#define MMC_REG_BUFFER_ACCESS		0x38
-
-#define STR_STP_CLK_IPG_CLK_GATE_DIS    (1<<15)
-#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14)
-#define STR_STP_CLK_ENDIAN              (1<<5)
-#define STR_STP_CLK_RESET               (1<<3)
-#define STR_STP_CLK_ENABLE              (1<<2)
-#define STR_STP_CLK_START_CLK           (1<<1)
-#define STR_STP_CLK_STOP_CLK            (1<<0)
-#define STATUS_CARD_PRESENCE            (1<<15)
-#define STATUS_SDIO_INT_ACTIVE          (1<<14)
-#define STATUS_END_CMD_RESP             (1<<13)
-#define STATUS_WRITE_OP_DONE            (1<<12)
-#define STATUS_DATA_TRANS_DONE          (1<<11)
-#define STATUS_WR_CRC_ERROR_CODE_MASK   (3<<10)
-#define STATUS_CARD_BUS_CLK_RUN         (1<<8)
-#define STATUS_APPL_BUFF_FF             (1<<7)
-#define STATUS_APPL_BUFF_FE             (1<<6)
-#define STATUS_RESP_CRC_ERR             (1<<5)
-#define STATUS_CRC_READ_ERR             (1<<3)
-#define STATUS_CRC_WRITE_ERR            (1<<2)
-#define STATUS_TIME_OUT_RESP            (1<<1)
-#define STATUS_TIME_OUT_READ            (1<<0)
-#define STATUS_ERR_MASK                 0x2f
-#define CLK_RATE_PRESCALER(x)           ((x) & 0x7)
-#define CLK_RATE_CLK_RATE(x)            (((x) & 0x7) << 3)
-#define CMD_DAT_CONT_CMD_RESP_LONG_OFF  (1<<12)
-#define CMD_DAT_CONT_STOP_READWAIT      (1<<11)
-#define CMD_DAT_CONT_START_READWAIT     (1<<10)
-#define CMD_DAT_CONT_BUS_WIDTH_1        (0<<8)
-#define CMD_DAT_CONT_BUS_WIDTH_4        (2<<8)
-#define CMD_DAT_CONT_INIT               (1<<7)
-#define CMD_DAT_CONT_BUSY               (1<<6)
-#define CMD_DAT_CONT_STREAM_BLOCK       (1<<5)
-#define CMD_DAT_CONT_WRITE              (1<<4)
-#define CMD_DAT_CONT_DATA_ENABLE        (1<<3)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
-#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
-#define INT_MASK_AUTO_CARD_DETECT       (1<<6)
-#define INT_MASK_DAT0_EN                (1<<5)
-#define INT_MASK_SDIO                   (1<<4)
-#define INT_MASK_BUF_READY              (1<<3)
-#define INT_MASK_END_CMD_RES            (1<<2)
-#define INT_MASK_WRITE_OP_DONE          (1<<1)
-#define INT_MASK_DATA_TRAN              (1<<0)
-#define INT_ALL                         (0x7f)
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list