[PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support

[Santosh]

On Friday 09 September 2011 01:34 PM, Shawn Guo wrote:
> Hi Santosh,
>
> On Sun, Sep 04, 2011 at 07:24:15PM +0530, Santosh Shilimkar wrote:
>> This patch adds the CPU0 and CPU1 off mode support. CPUX close switch
>> retention (CSWR) is not supported by hardware design.
>>
>> The CPUx OFF mode isn't supported on OMAP4430 ES1.0
>>
>> CPUx sleep code is common for hotplug, suspend and CPUilde.
>>
>> Signed-off-by: Santosh Shilimkar<santosh.shilimkar at ti.com>
>> Cc: Kevin Hilman<khilman at ti.com>
>> ---
>>   arch/arm/mach-omap2/Makefile                    |    3 +-
>>   arch/arm/mach-omap2/include/mach/omap-secure.h  |    8 +
>>   arch/arm/mach-omap2/include/mach/omap4-common.h |   25 +++
>>   arch/arm/mach-omap2/omap-mpuss-lowpower.c       |  249 +++++++++++++++++++++++
>>   arch/arm/mach-omap2/omap-smp.c                  |    6 +
>>   arch/arm/mach-omap2/omap4-sar-layout.h          |    9 +
>>   arch/arm/mach-omap2/pm44xx.c                    |    6 +
>>   arch/arm/mach-omap2/sleep44xx.S                 |  213 +++++++++++++++++++
>>   8 files changed, 518 insertions(+), 1 deletions(-)
>>   create mode 100644 arch/arm/mach-omap2/omap-mpuss-lowpower.c
>>
>
> [...]
>
>> diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
>> index 049f426..230ab8c 100644
>> --- a/arch/arm/mach-omap2/sleep44xx.S
>> +++ b/arch/arm/mach-omap2/sleep44xx.S
>> @@ -11,8 +11,221 @@
>>
>>   #include<linux/linkage.h>
>>   #include<asm/system.h>
>> +#include<asm/smp_scu.h>
>> +#include<asm/memory.h>
>> +#include<asm/hardware/cache-l2x0.h>
>>
>> +#include<plat/omap44xx.h>
>>   #include<mach/omap4-common.h>
>> +#include<mach/omap-secure.h>
>> +
>> +#include "omap4-sar-layout.h"
>> +
>> +#ifdef CONFIG_SMP
>> +
>> +.macro	DO_SMC
>> +	dsb
>> +	smc	#0
>> +	dsb
>> +.endm
>> +
>> +ppa_zero_params:
>> +	.word		0x0
>> +
>> +/*
>> + * =============================
>> + * == CPU suspend finisher ==
>> + * =============================
>> + *
>> + * void omap4_finish_suspend(unsigned long cpu_state)
>> + *
>> + * This function code saves the CPU context and performs the CPU
>> + * power down sequence. Calling WFI effectively changes the CPU
>> + * power domains states to the desired target power state.
>> + *
>> + * @cpu_state : contains context save state (r0)
>> + *	0 - No context lost
>> + * 	1 - CPUx L1 and logic lost: MPUSS CSWR
>> + * 	2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
>> + *	3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
>
> I was told by rmk that same as imx6q, omap44xx will retain L2 content
> across suspen/resume cycle.  Then what does "L2 lost" mean here?  Or
> what rmk meant is the case cpu_state == 2?
>
Yes.

The last case is entire SOC OFF. We call Device OFF in OMAP.
All voltages will scale to 0 V. This isn't supported by this
series.

Regards
Santosh