[PATCH] ARM: kirkwood: reorder machine_desc initializers
Christophe Vu-Brugier
cvubrugier at lacie.com
Wed Nov 16 12:41:02 EST 2011
The initializers in MACHINE_START should appear in the same order
as they are declared in struct machine_desc to reflect the order in
which they are called.
Signed-off-by: Christophe Vu-Brugier <cvubrugier at lacie.com>
---
This patch is based on the 'reset' branch. It depends on the following
commit:
2f82cc8 ARM: restart: kirkwood: use new restart hook
arch/arm/mach-kirkwood/d2net_v2-setup.c | 2 +-
arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 2 +-
arch/arm/mach-kirkwood/dockstar-setup.c | 2 +-
arch/arm/mach-kirkwood/guruplug-setup.c | 2 +-
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
arch/arm/mach-kirkwood/netspace_v2-setup.c | 6 +++---
arch/arm/mach-kirkwood/netxbig_v2-setup.c | 4 ++--
arch/arm/mach-kirkwood/openrd-setup.c | 6 +++---
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
arch/arm/mach-kirkwood/sheevaplug-setup.c | 4 ++--
arch/arm/mach-kirkwood/t5325-setup.c | 2 +-
arch/arm/mach-kirkwood/ts219-setup.c | 2 +-
arch/arm/mach-kirkwood/ts41x-setup.c | 2 +-
14 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 6e1bac9..c3d867e 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -222,10 +222,10 @@ static void __init d2net_v2_init(void)
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.atag_offset = 0x100,
- .init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = d2net_v2_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d933593..815ec88 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -98,10 +98,10 @@ subsys_initcall(db88f6281_pci_init);
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed at marvell.com> */
.atag_offset = 0x100,
- .init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = db88f6281_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 61d9a55..7a48e76 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -103,10 +103,10 @@ static void __init dockstar_init(void)
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
.atag_offset = 0x100,
- .init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = dockstar_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index bdaed38..58e7da8 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -122,10 +122,10 @@ static void __init guruplug_init(void)
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores at marvell.com> */
.atag_offset = 0x100,
- .init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = guruplug_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 85f6169..00d90d1 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -164,10 +164,10 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh at marvell.com> */
.atag_offset = 0x100,
- .init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = mv88f6281gtw_ge_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index e6bba01..3001c18 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -259,11 +259,11 @@ static void __init netspace_v2_init(void)
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.atag_offset = 0x100,
- .init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = netspace_v2_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -271,11 +271,11 @@ MACHINE_END
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.atag_offset = 0x100,
- .init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = netspace_v2_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -283,11 +283,11 @@ MACHINE_END
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.atag_offset = 0x100,
- .init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = netspace_v2_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 31ae8de..42a9d75 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -400,11 +400,11 @@ static void __init netxbig_v2_init(void)
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = netxbig_v2_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -412,11 +412,11 @@ MACHINE_END
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = netxbig_v2_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 01f8c89..e89b54c 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -215,11 +215,11 @@ subsys_initcall(openrd_pci_init);
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa at einfochips.com> */
.atag_offset = 0x100,
- .init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = openrd_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -228,11 +228,11 @@ MACHINE_END
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa at einfochips.com> */
.atag_offset = 0x100,
- .init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = openrd_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -241,11 +241,11 @@ MACHINE_END
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa at einfochips.com> */
.atag_offset = 0x100,
- .init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = openrd_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index fd2c9c8..1e0cd22 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -80,10 +80,10 @@ subsys_initcall(rd88f6192_pci_init);
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed at marvell.com> */
.atag_offset = 0x100,
- .init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = rd88f6192_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index ef92207..2aa979a 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -116,10 +116,10 @@ subsys_initcall(rd88f6281_pci_init);
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed at marvell.com> */
.atag_offset = 0x100,
- .init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = rd88f6281_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 85bff6b..d71fc59 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -139,11 +139,11 @@ static void __init sheevaplug_init(void)
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi at marvell.com> */
.atag_offset = 0x100,
- .init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = sheevaplug_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -151,11 +151,11 @@ MACHINE_END
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
.atag_offset = 0x100,
- .init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = sheevaplug_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index 966b2b3..7d64cdd 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -202,10 +202,10 @@ subsys_initcall(hp_t5325_pci_init);
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm at cyrius.com> */
.atag_offset = 0x100,
- .init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = hp_t5325_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 73e2b6c..60675cb 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -133,10 +133,10 @@ subsys_initcall(ts219_pci_init);
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm at cyrius.com> */
.atag_offset = 0x100,
- .init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = qnap_ts219_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca26..7d88dd5 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -177,10 +177,10 @@ subsys_initcall(ts41x_pci_init);
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm at cyrius.com> */
.atag_offset = 0x100,
- .init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .init_machine = qnap_ts41x_init,
.restart = kirkwood_restart,
MACHINE_END
--
1.7.7.1
More information about the linux-arm-kernel
mailing list