[PATCH] omap: cleanup NAND platform data
Grazvydas Ignotas
notasas at gmail.com
Fri Jun 3 15:56:33 EDT 2011
omap_nand_platform_data fields 'options', 'gpio_irq', 'nand_setup' and
'dma_channel' are never referenced by the NAND driver, yet various
board files are initializing those fields. This is both incorrect and
confusing, so remove them. This allows to get rid of a global
variable in gpmc-nand.c.
This also corrects an issue where some boards are trying to pass NAND
16bit flag through .options, but the driver is using .devsize instead
and ignoring .options.
Finally, .dev_ready is treated as a flag by the driver, so make it bool
instead of a function pointer.
Signed-off-by: Grazvydas Ignotas <notasas at gmail.com>
---
arch/arm/mach-omap2/board-cm-t35.c | 2 --
arch/arm/mach-omap2/board-cm-t3517.c | 1 -
arch/arm/mach-omap2/board-flash.c | 4 ----
arch/arm/mach-omap2/common-board-devices.c | 6 ++----
arch/arm/mach-omap2/gpmc-nand.c | 10 +++-------
arch/arm/plat-omap/include/plat/nand.h | 6 +-----
6 files changed, 6 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c63115b..99238e6 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -164,9 +164,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
static struct omap_nand_platform_data cm_t35_nand_data = {
.parts = cm_t35_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
-
};
static void __init cm_t35_init_nand(void)
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 08f08e8..c80d862 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -237,7 +237,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
static struct omap_nand_platform_data cm_t3517_nand_data = {
.parts = cm_t3517_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 729892f..aa1b0cb 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = {
};
static struct omap_nand_platform_data board_nand_data = {
- .nand_setup = NULL,
.gpmc_t = &nand_timings,
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
- .dev_ready = NULL,
- .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
};
void
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index e94903b..366171d 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -115,9 +115,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data = {
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
-};
+static struct omap_nand_platform_data nand_data;
void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
int nr_parts)
@@ -148,7 +146,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
nand_data.cs = nandcs;
nand_data.parts = parts;
nand_data.nr_parts = nr_parts;
- nand_data.options = options;
+ nand_data.devsize = options;
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
if (gpmc_nand_init(&nand_data) < 0)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index c1791d0..8ad210b 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -20,8 +20,6 @@
#include <plat/board.h>
#include <plat/gpmc.h>
-static struct omap_nand_platform_data *gpmc_nand_data;
-
static struct resource gpmc_nand_resource = {
.flags = IORESOURCE_MEM,
};
@@ -33,7 +31,7 @@ static struct platform_device gpmc_nand_device = {
.resource = &gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(void)
+static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
{
struct gpmc_timings t;
int err;
@@ -83,13 +81,11 @@ static int omap2_nand_gpmc_retime(void)
return 0;
}
-int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
- gpmc_nand_data = _nand_data;
- gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -100,7 +96,7 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
}
/* Set timings in GPMC */
- err = omap2_nand_gpmc_retime();
+ err = omap2_nand_gpmc_retime(gpmc_nand_data);
if (err < 0) {
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index d86d1ec..67fc506 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -19,15 +19,11 @@ enum nand_io {
};
struct omap_nand_platform_data {
- unsigned int options;
int cs;
- int gpio_irq;
struct mtd_partition *parts;
struct gpmc_timings *gpmc_t;
int nr_parts;
- int (*nand_setup)(void);
- int (*dev_ready)(struct omap_nand_platform_data *);
- int dma_channel;
+ bool dev_ready;
int gpmc_irq;
enum nand_io xfer_type;
unsigned long phys_base;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list