[PATCH 3/4] dt: omap3: add generic board file for dt support

Grant Likely grant.likely at secretlab.ca
Tue Jul 19 17:37:37 EDT 2011


On Tue, Jul 19, 2011 at 11:28:53AM +0530, G, Manjunath Kondaiah wrote:
> Grant/Kevin,
> 
> On Sun, Jul 17, 2011 at 10:43 AM, Grant Likely
> <grant.likely at secretlab.ca> wrote:
> > Hi Manjunath,
> >
> > Comments below.  I left in a lot of context for the new folks that
> > I've cc'd (Tony and Kevin).
> >
> > On Sat, Jul 16, 2011 at 2:07 PM, G, Manjunath Kondaiah <manjugk at ti.com> wrote:
> >> On Thu, Jul 14, 2011 at 4:45 AM, Grant Likely <grant.likely at secretlab.ca> wrote:
> >>>> > +static void __init omap3_init(void)
> >>>> > +{
> [...]
> >> +       omap_register_i2c_bus(id, speed, i2c_board_info, 1);
> >
> > While this does in a sense work, and creates an omap_device for the
> > i2c bus that does get probed, it ends up encoding an awful lot of
> > device specific details into the generic devicetree support code.  The
> > i2c bus driver itself must be responsible for decoding the speed and
> > child nodes, and in fact it can easily be modified to do so (I've
> > already demonstrated how to do so).  The real problem is making sure
> > the platform_device is created in a way that attaches the correct
> > hwmod data. For this context, the current omap_register_i2c_bus()
> > isn't a useful method for doing so.
> >
> > So what is to be done?  omap_register_i2c_bus() does three things;
> > 1) register an i2c board info for the bus with i2c_register_board_info(),
> > 2) fill platform_data for the device, and
> > 3) use omap_i2c_add_bus to create the platform_device with attached hwmod.
> >
> > Of these three, 1 & 2 must not be done when using the DT. Only
> > omap_i2c_add_bus() does something useful, but that is still specific
> > to the i2c device.
> >
> > omap_i2c_add_bus() splits to omap{1,2}_add_bus().
> >
> > omap1_i2c_add_bus() sets up pinmux and calls platform_device register.
> >  pinmux setup needs to be factored out anyway for generic DT platform
> > device registration, which just leaves platform_device creation which
> > is already handled by of_platform_populate().
> >
> > omap2_i2c_add_bus() does the same thing, except it also looks up the
> > hwmod data (*oh) and uses it to call omap_device_build().
> > omap_device_build() or something equivalent needs to be called for
> > every omap device in the system, which is to create platform_devices
> > with hwmod attached.  Now we're starting to hit generic code.  :-)
> >
> > The way I see it, you've got two options:
> >
> > 1) modify the of_platform_bus_create() to call some kind of
> > of_platform_bus_create_omap() for devices that match "ti,omap3-device"
> > or something.
> >
> > 2) Leave of_platform_bus_create(), and instead us a notifier to attach
> > hwmod data to normal platform devices.  omap_device_build() is
> > actually pretty simple.  It allocated a device, it attaches
> > platform_data and hwmod pointers to the device and registers it.
> > omap_device_register() is just a wrapper around
> > platform_device_register().
> >
> > My preference is definitely #2, but there is a wrinkle in this
> > approach.  Unfortunately omap_devices are not simply plain
> > platform_devices with extra data attached, an omap_device actually
> > embeds the platform_device inside it, which cannot be attached after
> > the fact.  I think I had talked with Kevin (cc'd) about eliminating
> > the embedding, but I cannot remember clearly on this point.  As long
> > as platform_device remains embedded inside struct omap_device, #2
> > won't work.
> 
> Can you please elaborate more on this issue?

Look at the of_platform_populate() call path (in devicetree/next) and
see how it handles amba devices.  Do the same thing for omap_devices.

g.




More information about the linux-arm-kernel mailing list