[i.MX28 GPMI] problem overwriting all-0xff data in NAND

Lothar Waßmann LW at KARO-electronics.de
Tue Jul 19 02:02:37 EDT 2011


Hi,

Huang Shijie writes:
> hi  Lothar:
> > On Mon, Jul 18, 2011 at 03:13:27PM +0200, Lothar Waßmann wrote:
> >> Hi,
> >>
> >> with the gpmi-nfc driver for imx28 from Shawn Guo on a TX28 I
> > To be clear, the author of gpmi-nfc driver is Huang Shijie (Cc-ed).
> >
> > Regards,
> > Shawn
> >
> >> encountered some problems with jffs2 when overwriting pages that have
> >> been written with 0xff (e.g. from padding from the file system image
> >> file).
> The GPMI driver now does not support the JFFS2 very well.
> The JFFS2 will write the OOB, while the BCH of GPMI will use the OOB too.
>
I have applied a patch (from the Freescale BSPs) that prevents JFFS2
from using the OOB area. But this still doesn't help.

> So I have to disable the JFFS2 to use the OOB. I have not finish the 
> code about it now.
> 
> I recommend you use the UBIFS. But the latest version of GPMI driver 
> meets a DMA bug.
> I am debugging the DMA bug now. and I will send it out when i fix it.
> 
What sort of DMA bug?


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________



More information about the linux-arm-kernel mailing list