[PATCH 2/2] dmaengine: imx-sdma: add device tree probe support

Shawn Guo shawn.guo at linaro.org
Thu Jul 14 12:14:17 EDT 2011


It adds device tree probe support for imx-sdma driver.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Vinod Koul <vinod.koul at intel.com>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |   55 ++++++++++++++++++++
 drivers/dma/imx-sdma.c                             |   29 +++++++++-
 2 files changed, 81 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
new file mode 100644
index 0000000..71f4525
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -0,0 +1,55 @@
+* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-sdma"
+- reg : Should contain SDMA registers location and length
+- interrupts : Should contain SDMA interrupt
+- fsl,sdma-script-name : Should contain the full path of SDMA RAM scripts
+  firmware
+- fsl,sdma-script-address : Should be an array giving entry address for each
+  script.  The address should be 0 in case that the specified script is not
+  included in the firmware.  See example below for the array details.
+
+Examples:
+
+sdma at 83fb0000 {
+	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+	reg = <0x83fb0000 0x4000>;
+	interrupts = <6>;
+	fsl,sdma-script-name = "sdma-imx51.bin";
+	fsl,sdma-script-address = <642>,	/* ap_2_ap */
+				  <0>,		/* ap_2_bp */
+				  <0>,		/* ap_2_ap_fixed */
+				  <0>,		/* bp_2_ap */
+				  <0>,		/* loopback_on_dsp_side */
+				  <0>,		/* mcu_interrupt_only */
+				  <0>,		/* firi_2_per */
+				  <0>,		/* firi_2_mcu */
+				  <0>,		/* per_2_firi */
+				  <0>,		/* mcu_2_firi */
+				  <0>,		/* uart_2_per */
+				  <817>,	/* uart_2_mcu */
+				  <0>,		/* per_2_app */
+				  <747>,	/* mcu_2_app */
+				  <0>,		/* per_2_per */
+				  <0>,		/* uartsh_2_per */
+				  <0>,		/* uartsh_2_mcu */
+				  <0>,		/* per_2_shp */
+				  <961>,	/* mcu_2_shp */
+				  <1473>,	/* ata_2_mcu */
+				  <1392>,	/* mcu_2_ata */
+				  <1033>,	/* app_2_per */
+				  <683>,	/* app_2_mcu */
+				  <1251>,	/* shp_2_per */
+				  <892>,	/* shp_2_mcu */
+				  <0>,		/* mshc_2_mcu */
+				  <0>,		/* mcu_2_mshc */
+				  <0>,		/* spdif_2_mcu */
+				  <0>,		/* mcu_2_spdif */
+				  <0>,		/* asrc_2_mcu */
+				  <0>,		/* ext_mem_2_ipu */
+				  <0>,		/* descrambler */
+				  <0>,		/* dptc_dvfs */
+				  <0>,		/* utra_addr */
+				  <0>;		/* ram_code_start */
+};
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 4a7aa72..664f7bc 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -32,6 +32,8 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 #include <mach/sdma.h>
@@ -331,6 +333,12 @@ static struct platform_device_id sdma_devtypes[] = {
 	}
 };
 
+static const struct of_device_id sdma_dt_ids[] = {
+	{ .compatible = "fsl,imx31-sdma", .data = &sdma_devtypes[IMX31_SDMA], },
+	{ .compatible = "fsl,imx35-sdma", .data = &sdma_devtypes[IMX35_SDMA], },
+	{ /* sentinel */ }
+};
+
 #define SDMA_H_CONFIG_DSPDMA	(1 << 12) /* indicates if the DSPDMA is used */
 #define SDMA_H_CONFIG_RTD_PINS	(1 << 11) /* indicates if Real-Time Debug pins are enabled */
 #define SDMA_H_CONFIG_ACR	(1 << 4)  /* indicates if AHB freq /core freq = 2 or 1 */
@@ -1257,6 +1265,10 @@ err_dma_alloc:
 
 static int __init sdma_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+			of_match_device(sdma_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	const char *fw_name;
 	int ret;
 	int irq;
 	struct resource *iores;
@@ -1272,7 +1284,7 @@ static int __init sdma_probe(struct platform_device *pdev)
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (!iores || irq < 0 || !pdata) {
+	if (!iores || irq < 0) {
 		ret = -EINVAL;
 		goto err_irq;
 	}
@@ -1302,6 +1314,8 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (!sdma->script_addrs)
 		goto err_alloc;
 
+	if (of_id)
+		pdev->id_entry = of_id->data;
 	sdma->devtype = pdev->id_entry->driver_data;
 
 	dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
@@ -1332,10 +1346,18 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_init;
 
-	if (pdata->script_addrs)
+	ret = of_property_read_u32_array(np, "fsl,sdma-script-address",
+				(u32 *) sdma->script_addrs,
+				sizeof(*sdma->script_addrs) / sizeof(u32));
+	if (ret < 0 && pdata && pdata->script_addrs)
 		sdma_add_scripts(sdma, pdata->script_addrs);
 
-	sdma_get_firmware(sdma, pdata->fw_name);
+	ret = of_property_read_string(np, "fsl,sdma-script-name",
+				      &fw_name);
+	if (!ret)
+		sdma_get_firmware(sdma, fw_name);
+	else if (pdata)
+		sdma_get_firmware(sdma, pdata->fw_name);
 
 	sdma->dma_device.dev = &pdev->dev;
 
@@ -1383,6 +1405,7 @@ static int __exit sdma_remove(struct platform_device *pdev)
 static struct platform_driver sdma_driver = {
 	.driver		= {
 		.name	= "imx-sdma",
+		.of_match_table = sdma_dt_ids,
 	},
 	.id_table	= sdma_devtypes,
 	.remove		= __exit_p(sdma_remove),
-- 
1.7.4.1




More information about the linux-arm-kernel mailing list