[PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers

Grant Likely grant.likely at secretlab.ca
Wed Jul 13 18:58:35 EDT 2011


On Thu, Jul 14, 2011 at 7:57 AM, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Thu, Jul 14, 2011 at 7:06 AM, G, Manjunath Kondaiah <manjugk at ti.com> wrote:
>>
>> Add omap3 SoC file for handling omap3 SoC i2c controllers existing
>> on l4-core bus.
>>
>> Out of three i2c controllers, first i2c controller is interfaced with
>> PMIC on all the boards of OMAP3. The clock for i2c controllers are
>> controlled through omap hwmod framework hence first i2c controller
>> device registration through dt is disabled till hwmod dependencies
>> are resolved.
>>
>> Signed-off-by: G, Manjunath Kondaiah <manjugk at ti.com>
>> ---
>>  arch/arm/boot/dts/omap3-soc.dtsi |   65 ++++++++++++++++++++++++++++++++++++++
>>  1 files changed, 65 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/omap3-soc.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap3-soc.dtsi b/arch/arm/boot/dts/omap3-soc.dtsi
>> new file mode 100644
>> index 0000000..f186a32
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-soc.dtsi
>> @@ -0,0 +1,65 @@
>> +/*
>> + * Device Tree Source for OMAP3 SoC
>> + *
>> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2.  This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +/dts-v1/;
>> +/include/ "skeleton.dtsi"
>> +
>> +/ {
>> +       #address-cells = <1>;
>> +       #size-cells = <1>;
>> +       model = "ti,omap3";
>
> You can drop the model property here since this doesn't define a board.
>
>> +       compatible = "ti,omap3";
>> +
>> +       intc: interrupt-controller at 0x48200000 {
>> +               compatible = "ti,omap3-intc", "arm,intc";
>
> Which arm intc controller?  For any new 'compatible' value you define,
> the patch needs to include documentation for it in
> Documentation/devicetree/bindings.
>
>> +               interrupt-controller;
>> +               #interrupt-cells = <1>;
>> +               reg = <0x48200000 0x1000>;
>> +       };
>> +
>> +       l4-core {
>> +               compatible = "ti,l4-core";
>
> Probably should be "ti,omap3-l4-core"?
>
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               ranges = <0 0x48000000 0x1000000>;
>> +
>> +               i2c at 1 {

This name is wrong.  The address portion of the name must match the
address in the first entry of the 'reg' property.  So, that would be:
"i2c at 70000".

>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       compatible = "ti,omap3-i2c";
>> +                       reg = <0x70000 0x100>;
>> +                       interrupts = < 88 >;
>> +                       status = "disabled";
>
> Drop the 'status' properties.  I know the current tegra code does
> this, but I'd prefer devices to be enabled by default and for boards
> to explicitly disable them instead of the other way around.
>
>> +               };
>> +
>> +               i2c at 2 {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       compatible = "ti,omap3-i2c";
>> +                       reg = <0x72000 0x100>;
>> +                       interrupts = < 89 >;
>> +               };
>> +
>> +               i2c at 3 {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +                       compatible = "ti,omap3-i2c";
>> +                       reg = <0x60000 0x100>;
>> +                       interrupts = < 93 >;
>> +               };
>> +       };
>> +
>> +       l4-per {
>> +               compatible = "ti,l4-per";
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               ranges = <0 0x49000000 0x100000>;
>> +       };
>> +};
>> --
>> 1.7.4.1
>>
>>
>
>
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.



More information about the linux-arm-kernel mailing list