[PATCH 2/3] ARM: mach-mx5/board-mx53_loco: Make UART1 functional

[Richard Zhao]

On Tue, Jan 25, 2011 at 01:08:34PM -0200, Fabio Estevam wrote:
> Fix IOMUX settings for UART1 and make UART1 functional.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
Acked-by: Richard Zhao <richard.zhao at freescale.com>
> ---
>  arch/arm/mach-mx5/board-mx53_loco.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
> index dadc856..cba4cd5 100644
> --- a/arch/arm/mach-mx5/board-mx53_loco.c
> +++ b/arch/arm/mach-mx5/board-mx53_loco.c
> @@ -41,8 +41,6 @@
>  static iomux_v3_cfg_t mx53_loco_pads[] = {
>  	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
>  	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
> -	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
> -	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
>  
>  	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
>  	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
> @@ -62,7 +60,7 @@ static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
>  
>  static inline void mx53_loco_init_uart(void)
>  {
> -	imx53_add_imx_uart(0, &mx53_loco_uart_data);
> +	imx53_add_imx_uart(0, NULL);
>  	imx53_add_imx_uart(1, &mx53_loco_uart_data);
>  	imx53_add_imx_uart(2, &mx53_loco_uart_data);
>  }
> -- 
> 1.6.0.4
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel