[PATCH v7 5/7] omap3: nand: configurable fifo threshold to gain the throughput

Nori, Sekhar nsekhar at ti.com
Mon Jan 3 07:25:30 EST 2011


Hi Sukumar,

On Wed, Dec 29, 2010 at 19:02:24, Ghorai, Sukumar wrote:
> Configure the FIFO THREASHOLD value different for read and write to keep busy
> both filling and to drain out of FIFO at reading and writing.
> 
> Signed-off-by: Vimal Singh <vimalsingh at ti.com>
> Signed-off-by: Sukumar Ghorai <s-ghorai at ti.com>
> ---
>  arch/arm/mach-omap2/gpmc.c             |   11 +++++++----
>  arch/arm/plat-omap/include/plat/gpmc.h |    5 ++++-
>  drivers/mtd/nand/omap2.c               |   22 ++++++++++++++--------
>  3 files changed, 25 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index cfaf357..b26b1a5 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -59,7 +59,6 @@
>  #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
>  #define GPMC_SECTION_SHIFT	28		/* 128 MB */
>  
> -#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
>  #define CS_NUM_SHIFT		24
>  #define ENABLE_PREFETCH		(0x1 << 7)
>  #define DMA_MPU_MODE		2
> @@ -595,15 +594,19 @@ EXPORT_SYMBOL(gpmc_nand_write);
>  /**
>   * gpmc_prefetch_enable - configures and starts prefetch transfer
>   * @cs: cs (chip select) number
> + * @fifo_th: fifo threshold to be used for read/ write
>   * @dma_mode: dma mode enable (1) or disable (0)
>   * @u32_count: number of bytes to be transferred
>   * @is_write: prefetch read(0) or write post(1) mode
>   */
> -int gpmc_prefetch_enable(int cs, int dma_mode,
> +int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
>  				unsigned int u32_count, int is_write)
>  {
>  
> -	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
> +	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
> +		printk(KERN_ERR "PREFETCH Fifo Threshold is not supported\n");
> +		return -1;

Please consider using pr_err(). Also, adding function/device name 
prefix helps locate which module caused the error from logs.

Also, is "operation not permitted" the best error we can give back 
here?

> +	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
>  		/* Set the amount of bytes to be prefetched */
>  		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
>  
> @@ -611,7 +614,7 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
>  		 * enable the engine. Set which cs is has requested for.
>  		 */
>  		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
> -					PREFETCH_FIFOTHRESHOLD |
> +					PREFETCH_FIFOTHRESHOLD(fifo_th) |
>  					ENABLE_PREFETCH |
>  					(dma_mode << DMA_MPU_MODE) |
>  					(0x1 & is_write)));
> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
> index 054e704..fb82335 100644
> --- a/arch/arm/plat-omap/include/plat/gpmc.h
> +++ b/arch/arm/plat-omap/include/plat/gpmc.h
> @@ -83,6 +83,9 @@
>  #define GPMC_IRQ_FIFOEVENTENABLE	0x01
>  #define GPMC_IRQ_COUNT_EVENT		0x02
>  
> +#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
> +#define PREFETCH_FIFOTHRESHOLD(val)	(val << 8)

Parenthesize val please.

> +
>  /*
>   * Note that all values in this struct are in nanoseconds, while
>   * the register values are in gpmc_fck cycles.
> @@ -133,7 +136,7 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
>  extern void gpmc_cs_free(int cs);
>  extern int gpmc_cs_set_reserved(int cs, int reserved);
>  extern int gpmc_cs_reserved(int cs);
> -extern int gpmc_prefetch_enable(int cs, int dma_mode,
> +extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
>  					unsigned int u32_count, int is_write);
>  extern int gpmc_prefetch_reset(int cs);
>  extern void omap3_gpmc_save_context(void);
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index 007862e..384d89b 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -243,7 +243,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
>  	}
>  
>  	/* configure and start prefetch transfer */
> -	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
> +	ret = gpmc_prefetch_enable(info->gpmc_cs,
> +			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
>  	if (ret) {
>  		/* PFPW engine is busy, use cpu copy method */
>  		if (info->nand.options & NAND_BUSWIDTH_16)
> @@ -287,7 +288,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>  	}
>  
>  	/*  configure and start prefetch transfer */
> -	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
> +	ret = gpmc_prefetch_enable(info->gpmc_cs,
> +			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
>  	if (ret) {
>  		/* PFPW engine is busy, use cpu copy method */
>  		if (info->nand.options & NAND_BUSWIDTH_16)
> @@ -340,8 +342,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
>  	dma_addr_t dma_addr;
>  	int ret;
>  
> -	/* The fifo depth is 64 bytes. We have a sync at each frame and frame
> -	 * length is 64 bytes.
> +	/* The fifo depth is 64 bytes max.
> +	 * But configure the FIFO-threahold to 32 to get a sync at each frame
> +	 * and frame length is 32 bytes.
>  	 */
>  	int buf_len = len >> 6;
>  
> @@ -382,7 +385,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
>  					OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
>  	}
>  	/*  configure and start prefetch transfer */
> -	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
> +	ret = gpmc_prefetch_enable(info->gpmc_cs,
> +			PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
>  	if (ret)
>  		/* PFPW engine is busy, use cpu copy methode */
>  		goto out_copy;
> @@ -518,7 +522,8 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
>  	init_completion(&info->comp);
>  
>  	/*  configure and start prefetch transfer */
> -	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
> +	ret = gpmc_prefetch_enable(info->gpmc_cs,
> +			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
>  	if (ret)
>  		/* PFPW engine is busy, use cpu copy methode */
>  		goto out_copy;
> @@ -563,8 +568,9 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
>  	info->buf = (u_char *) buf;
>  	init_completion(&info->comp);
>  
> -	/*  configure and start prefetch transfer */
> -	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
> +	/* configure and start prefetch transfer : size=24 */
> +	ret = gpmc_prefetch_enable(info->gpmc_cs,
> +			(PREFETCH_FIFOTHRESHOLD_MAX*3)/8, 0x0, len, 0x1);

Spaces around binary '*'

Thanks,
Sekhar




More information about the linux-arm-kernel mailing list