[PATCH] ARM: EXYNOS4: Turn the mach-smdkc210.c into mach-smdv310.c

Kukjin Kim kgene.kim at samsung.com
Fri Aug 19 09:11:56 EDT 2011


Since the components on SMDKC210 are similar with SMDKV310
even though its memory is different. So we can support the
SMDKC210 and SMDKV310 on mach-smdkv310.c, one machine file.

Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |   17 +--
 arch/arm/mach-exynos4/Makefile        |    2 +-
 arch/arm/mach-exynos4/mach-smdkc210.c |  309 ---------------------------------
 arch/arm/mach-exynos4/mach-smdkv310.c |   78 +++++++++
 4 files changed, 80 insertions(+), 326 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/mach-smdkc210.c

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab9..bee8f77 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -113,22 +113,7 @@ menu "EXYNOS4 Machines"
 
 config MACH_SMDKC210
 	bool "SMDKC210"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_PD
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_SDHCI
+	select MACH_SMDKV310
 	help
 	  Machine support for Samsung SMDKC210
 
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7..e3e93ea 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support
 
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index a7c65e0..0000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkc210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
-	.resource	= smdkc210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&s5p_device_fimd0,
-	&smdkc210_lcd_lte480wv,
-	&smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkc210_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
-	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
-	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
-	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim at samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkc210_map_io,
-	.init_machine	= smdkc210_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea41495..a16eb56 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
@@ -112,6 +117,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv310_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
+	&s5p_device_fimd0,
+	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
 };
@@ -248,6 +316,7 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -261,3 +330,12 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim at samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
-- 
1.7.1




More information about the linux-arm-kernel mailing list