[patch v4 02/10] imx51: fix iomux configuration

[Marek Vasut]

On Wednesday 27 October 2010 14:40:47 Arnaud Patard wrote:
> - ALT0 is used to set GPIO mode of GPIO_1_{2,3,4,5,6,7,8,9} but it's ALT1
> for GPIO_1_{0,1}.
> 
> Signed-off-by: Arnaud Patard <arnaud.patard at rtp-net.org>
> Index: linux-2.6-submit/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> ===================================================================
> ---
> linux-2.6-submit.orig/arch/arm/plat-mxc/include/mach/iomux-mx51.h	2010-10-
> 20 18:30:30.000000000 +0200 +++
> linux-2.6-submit/arch/arm/plat-mxc/include/mach/iomux-mx51.h	2010-10-20
> 18:30:42.000000000 +0200 @@ -368,18 +368,18 @@
>  							MX51_SDHCI_PAD_CTRL)
>  #define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   
0,
> MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8,
> 0x3B0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0,   0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2		
IOMUX_PAD(0x7D4,
> 0x3CC, 0, 0x0,   0, MX51_GPIO_PAD_CTRL) #define
> MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 |
> IOMUX_CONFIG_SION), \ 0x9b8,   3, MX51_I2C_PAD_CTRL)
> -#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0,   
0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3		
IOMUX_PAD(0x7D8,
> 0x3D0, 0, 0x0,   0, MX51_GPIO_PAD_CTRL) #define
> MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 |
> IOMUX_CONFIG_SION), \ 0x9bc,   3, MX51_I2C_PAD_CTRL)
>  #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0,
> 0x0,   0, NO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 1, 0x0,   0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808,
> 0x3DC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 1, 0x0,   0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810,
> 0x3E4, 1, 0x0,   0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 1, 0x0,   0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818,
> 0x3EC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 0, 0x0,   0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO_1_5		
IOMUX_PAD(0x808,
> 0x3DC, 0, 0x0,   0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 0, 0x0,   0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO_1_7		
IOMUX_PAD(0x810,
> 0x3E4, 0, 0x0,   0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 0, 0x0,   0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_9__GPIO_1_9		
IOMUX_PAD(0x818,
> 0x3EC, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
> 
>  #endif /* __MACH_IOMUX_MX51_H__ */
> 

Maybe you should CC the freescale guy on this, CCed
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel