[PATCH v2 1/1] mx35pdk: add debug board support

[Jason Wang]

Baruch Siach wrote:
> Hi xiao,
>
> On Thu, Oct 21, 2010 at 10:08:02AM +0800, xiao jiang wrote:
>   
>> 2010/10/21 xiao jiang <jgq516 at gmail.com>
>>     
>>> 2010/10/20 Baruch Siach <baruch at tkos.co.il>
>>>       
>>>> On Wed, Oct 20, 2010 at 05:34:43PM +0800, jgq516 at gmail.com wrote:
>>>>         
>>>>> From: Xiao Jiang <jgq516 at gmail.com>
>>>>>
>>>>> Enable debug board support for mx35pdk. As suggested
>>>>> by Fabio, add MXC_DEBUG_BOARD config and redefinition
>>>>> EXPIO_PARENT_INT.
>>>>>
>>>>> Signed-off-by: Xiao Jiang <jgq516 at gmail.com>
>>>>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>>>>> ---
>>>>>  arch/arm/mach-mx3/Kconfig         |    1 +
>>>>>  arch/arm/mach-mx3/mach-mx35_3ds.c |    8 ++++++++
>>>>>  2 files changed, 9 insertions(+), 0 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
>>>>> index 85beece..cdf6ac5 100644
>>>>> --- a/arch/arm/mach-mx3/Kconfig
>>>>> +++ b/arch/arm/mach-mx3/Kconfig
>>>>>           
>>>> [snip]
>>>>
>>>>         
>>>>> @@ -95,6 +99,10 @@ static void __init mxc_board_init(void)
>>>>>       imx35_add_imx_uart0(&uart_pdata);
>>>>>
>>>>>       mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
>>>>> +
>>>>> +     if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
>>>>> +             pr_warn("Init of the debugboard failed, all "
>>>>> +                     "devices on the board are unusable.\n");
>>>>>           
>>>>                             ^^^^^
>>>> You probably mean debugboard here. I'd change the wording.
>>>>
>>>> There are some devices in the debug board, such as lan9217 ethernet. If
>>>>         
>>> mxc_expio_init failed,
>>> then the lan9217 can't be use.
>>>       
>
> Of course. But this does not make devices on the main board unusable, isn't 
> it? The user might think that his whole system is unusable because of this 
> init failure.
>
>   
>>> BTW: In mach-mx5/board-mx51_3ds.c and mach-mx31_3ds.c, the warn messages
>>> are same.
>>> if (mxc_expio_init(MX51_CS5_BASE_ADDR,
>>> EXPIO_PARENT_INT))
>>>
>>>                  printk(KERN_WARNING "Init of the debugboard failed, all "
>>>
>>>                                      "devices on the board are
>>> unusable.\n");
>>>
>>> Ooo, I pressed  the keyboard neglectfully[?], and you can see below
>>>       
>> sentence in mach-mx31_3ds.c.
>> if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
>>          printk(KERN_WARNING "Init of the debugboard failed, all "
>>                "devices on the board are unusable.\n");
>>     
>
> Then this wording should also change there. Adding Jason Wang to Cc.
>
> baruch
>
>   

Yes, you are right, this is a misleading word. should s/board/debugboard/.
In addition, for mach-mx31_3ds.c, we should remove "!" before 
mxc_expio_init().

I will fix it ASAP.

Thanks,
Jason.
>> Thanks,
>> Xiao Jiang
>>     
>
>