[PATCHv4 2/6] omap3: fix and improve the LED handling on IGEP v2 board.

Enric Balletbo i Serra eballetbo at gmail.com
Tue Oct 5 10:15:18 EDT 2010


The IGEP v2 board has four leds, this patch allows control all
of these LEDs using the LED class if CONFIG_LEDS_GPIO is selected
or using the General Purpose Input/Output (GPIO) interface if
CONFIG_LEDS_GPIO is not selected.

Signed-off-by: Enric Balletbo i Serra <eballetbo at gmail.com>
---
 arch/arm/mach-omap2/board-igep0020.c |  156 +++++++++++++++++++---------------
 1 files changed, 87 insertions(+), 69 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 07dbdb7..83a30ce 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -261,6 +261,77 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
+	[0] = {
+		.name			= "gpio-led:red:d0",
+		.gpio			= IGEP2_GPIO_LED0_RED,
+		.default_trigger	= "default-off"
+	},
+	[1] = {
+		.name			= "gpio-led:green:d0",
+		.gpio			= IGEP2_GPIO_LED0_GREEN,
+		.default_trigger	= "default-off",
+	},
+	[2] = {
+		.name			= "gpio-led:red:d1",
+		.gpio			= IGEP2_GPIO_LED1_RED,
+		.default_trigger	= "default-off",
+	},
+	[3] = {
+		.name			= "gpio-led:green:d1",
+		.default_trigger	= "heartbeat",
+		.gpio			= -EINVAL, /* gets replaced */
+	},
+};
+
+static struct gpio_led_platform_data igep2_led_pdata = {
+	.leds           = igep2_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
+};
+
+static struct platform_device igep2_led_device = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &igep2_led_pdata,
+	},
+};
+
+static void __init igep2_leds_init(void)
+{
+	platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_leds_init(void)
+{
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+
+}
+#endif
+
 static int igep2_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -290,14 +361,26 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	    (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0))
 		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
 
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
+		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
+#else
+	igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
 	return 0;
 };
 
-static struct twl4030_gpio_platform_data igep2_gpio_data = {
+static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= false,
+	.use_leds	= true,
 	.setup		= igep2_twl_gpio_setup,
 };
 
@@ -371,47 +454,6 @@ static void __init igep2_display_init(void)
 		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
 }
 
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep2_gpio_leds[] = {
-	{
-		.name = "led0:red",
-		.gpio = IGEP2_GPIO_LED0_RED,
-	},
-	{
-		.name = "led0:green",
-		.default_trigger = "heartbeat",
-		.gpio = IGEP2_GPIO_LED0_GREEN,
-	},
-	{
-		.name = "led1:red",
-		.gpio = IGEP2_GPIO_LED1_RED,
-	},
-};
-
-static struct gpio_led_platform_data igep2_led_pdata = {
-	.leds           = igep2_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
-};
-
-static struct platform_device igep2_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep2_led_pdata,
-	},
-};
-
-static void __init igep2_init_led(void)
-{
-	platform_device_register(&igep2_led_device);
-}
-
-#else
-static inline void igep2_init_led(void) {}
-#endif
-
 static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_dss_device,
 };
@@ -441,7 +483,7 @@ static struct twl4030_platform_data igep2_twldata = {
 	/* platform_data for children goes here */
 	.usb		= &igep2_usb_data,
 	.codec		= &igep2_codec_data,
-	.gpio		= &igep2_gpio_data,
+	.gpio		= &igep2_twl4030_gpio_pdata,
 	.vmmc1          = &igep2_vmmc1,
 	.vmmc2		= &igep2_vmmc2,
 	.vpll2		= &igep2_vpll2,
@@ -502,34 +544,10 @@ static void __init igep2_init(void)
 	usb_ehci_init(&ehci_pdata);
 
 	igep2_flash_init();
-	igep2_init_led();
+	igep2_leds_init();
 	igep2_display_init();
 	igep2_init_smsc911x();
 
-	/* GPIO userspace leds */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED0_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
-
-	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
-	if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED1_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
-#endif
-
 	/* GPIO W-LAN + Bluetooth combo module */
 	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list