[PATCH] ARM: mach-shmobile: Initial AG5 and AG5EVM support
Magnus Damm
magnus.damm at gmail.com
Wed Nov 17 05:59:31 EST 2010
From: Magnus Damm <damm at opensource.se>
This patch adds initial support for Renesas SH-Mobile AG5.
At this point the AG5 CPU support is limited to the ARM
core, SCIF serial and a CMT timer together with L2 cache
and the GIC. The AG5EVM board also supports Ethernet.
Future patches will add support for GPIO, INTCS, CPGA
and platform data / driver updates for devices such as
IIC, LCDC, FSI, KEYSC, CEU and SDHI among others.
The code in entry-macro.S will be cleaned up when the
ARM IRQ demux code improvements have been merged.
Depends on the AG5EVM mach-type recently registered but
not yet present in arch/arm/tools/mach-types.
As the AG5EVM board comes with 512MiB memory it is
recommended to turn on HIGHMEM.
Many thanks to Yoshii-san for initial bring up.
Signed-off-by: Magnus Damm <damm at opensource.se>
---
Based on the rmobile/core topic branch in the sh git tree.
arch/arm/mach-shmobile/Kconfig | 12 +
arch/arm/mach-shmobile/Makefile | 2
arch/arm/mach-shmobile/board-ag5evm.c | 159 ++++++++++++++
arch/arm/mach-shmobile/clock-sh73a0.c | 101 +++++++++
arch/arm/mach-shmobile/include/mach/common.h | 4
arch/arm/mach-shmobile/include/mach/entry-macro.S | 78 +++++++
arch/arm/mach-shmobile/include/mach/irqs.h | 3
arch/arm/mach-shmobile/include/mach/sh73a0.h | 6
arch/arm/mach-shmobile/setup-sh73a0.c | 234 +++++++++++++++++++++
arch/arm/mm/Kconfig | 2
drivers/serial/sh-sci.h | 7
11 files changed, 607 insertions(+), 1 deletion(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2010-11-17 19:26:28.000000000 +0900
@@ -20,6 +20,12 @@ config ARCH_SH7372
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
+config ARCH_SH73A0
+ bool "SH-Mobile AG5 (R8A73A00)"
+ select CPU_V7
+ select SH_CLK_CPG
+ select ARM_GIC
+
comment "SH-Mobile Board Type"
config MACH_G3EVM
@@ -51,6 +57,10 @@ config AP4EVB_WVGA
endchoice
+config MACH_AG5EVM
+ bool "AG5EVM board"
+ depends on ARCH_SH73A0
+
comment "SH-Mobile System Configuration"
menu "Memory configuration"
@@ -60,6 +70,7 @@ config MEMORY_START
default "0x50000000" if MACH_G3EVM
default "0x40000000" if MACH_G4EVM
default "0x40000000" if MACH_AP4EVB
+ default "0x40000000" if MACH_AG5EVM
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
@@ -71,6 +82,7 @@ config MEMORY_SIZE
default "0x08000000" if MACH_G3EVM
default "0x08000000" if MACH_G4EVM
default "0x10000000" if MACH_AP4EVB
+ default "0x20000000" if MACH_AG5EVM
default "0x04000000"
help
This sets the default memory size assumed by your kernel. It can
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2010-11-17 19:25:51.000000000 +0900
@@ -9,6 +9,7 @@ obj-y := timer.o console.o clock.o pm
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o
# Pinmux setup
pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o
@@ -20,3 +21,4 @@ obj-$(CONFIG_GENERIC_GPIO) += $(pfc-y)
obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o
obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
+obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
--- /dev/null
+++ work/arch/arm/mach-shmobile/board-ag5evm.c 2010-11-17 19:25:52.000000000 +0900
@@ -0,0 +1,159 @@
+/*
+ * arch/arm/mach-shmobile/board-ag5evm.c
+ *
+ * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj at renesas.com>
+ * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_sci.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+static struct resource smsc9220_resources[] = {
+ [0] = {
+ .start = 0x14000000,
+ .end = 0x14000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(33), /* PINT1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smsc9220_platdata,
+ },
+ .resource = smsc9220_resources,
+ .num_resources = ARRAY_SIZE(smsc9220_resources),
+};
+
+static struct platform_device *ag5evm_devices[] __initdata = {
+ ð_device,
+};
+
+static struct map_desc ag5evm_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init ag5evm_map_io(void)
+{
+ iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+
+ /* setup early devices and console here as well */
+ sh73a0_add_early_devices();
+ shmobile_setup_console();
+}
+
+#define PINTC_ADDR 0xe6900000
+#define PINTER0A (PINTC_ADDR + 0xa0)
+#define PINTCR0A (PINTC_ADDR + 0xb0)
+
+void __init ag5evm_init_irq(void)
+{
+ /* setup PINT: enable PINTA2 as active low */
+ __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
+ __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
+
+ gic_dist_init(0, __io(0xf0001000), 29);
+ gic_cpu_init(0, __io(0xf0000100));
+}
+
+#define PORT144CR 0xe6052090
+#define PORT145CR 0xe6052091
+
+#define PORT154CR 0xe605209a
+#define PORT155CR 0xe605209b
+#define PORT156CR 0xe605209c
+#define PORT157CR 0xe605209d
+
+#define PORTR159_128DR 0xe6056004
+
+static void __init ag5evm_init(void)
+{
+ /* enable SCIFA2 */
+ __raw_writeb(0x12, PORT154CR); /* TXD */
+ __raw_writeb(0x22, PORT155CR); /* RXD */
+ __raw_writeb(0x12, PORT156CR); /* RTS */
+ __raw_writeb(0x22, PORT157CR); /* CTS */
+
+ /* enable SMSC911X */
+ __raw_writeb(0x20, PORT144CR); /* PINTA2 */
+ __raw_writeb(0x10, PORT145CR); /* RESET */
+ __raw_writel(__raw_readl(PORTR159_128DR) & ~(1 << 17), PORTR159_128DR);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 64K*8way */
+ l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);
+#endif
+ sh73a0_add_standard_devices();
+ platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
+}
+
+static void __init ag5evm_timer_init(void)
+{
+ sh73a0_clock_init();
+ shmobile_timer.init();
+ return;
+}
+
+struct sys_timer ag5evm_timer = {
+ .init = ag5evm_timer_init,
+};
+
+MACHINE_START(AG5EVM, "ag5evm")
+ .map_io = ag5evm_map_io,
+ .init_irq = ag5evm_init_irq,
+ .init_machine = ag5evm_init,
+ .timer = &ag5evm_timer,
+MACHINE_END
--- /dev/null
+++ work/arch/arm/mach-shmobile/clock-sh73a0.c 2010-11-17 19:31:15.000000000 +0900
@@ -0,0 +1,101 @@
+/*
+ * sh73a0 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+#define SMSTPCR0 0xe6150130
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
+#define SMSTPCR5 0xe6150144
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+ .rate = 32768,
+};
+
+/* Temporarily fixed 48 MHz SUB clock */
+static struct clk sub_clk = {
+ .rate = 48000000,
+};
+
+static struct clk *main_clks[] = {
+ &r_clk,
+ &sub_clk,
+};
+
+enum { MSTP219,
+ MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+ MSTP331, MSTP329,
+ MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+ SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP219] = MSTP(&sub_clk, SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP207] = MSTP(&sub_clk, SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = MSTP(&sub_clk, SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = MSTP(&sub_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = MSTP(&sub_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = MSTP(&sub_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP201] = MSTP(&sub_clk, SMSTPCR2, 1, 0), /* SCIFA3 */
+ [MSTP200] = MSTP(&sub_clk, SMSTPCR2, 0, 0), /* SCIFA4 */
+ [MSTP331] = MSTP(&sub_clk, SMSTPCR3, 31, 0), /* SCIFA6 */
+ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+};
+
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+};
+
+void __init sh73a0_clock_init(void)
+{
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup sh73a0 clocks\n");
+}
--- 0001/arch/arm/mach-shmobile/include/mach/common.h
+++ work/arch/arm/mach-shmobile/include/mach/common.h 2010-11-17 19:25:51.000000000 +0900
@@ -30,4 +30,8 @@ extern void sh7372_pinmux_init(void);
extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk;
+extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_clock_init(void);
+
#endif /* __ARCH_MACH_COMMON_H */
--- 0001/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ work/arch/arm/mach-shmobile/include/mach/entry-macro.S 2010-11-17 19:30:03.000000000 +0900
@@ -20,6 +20,7 @@
.macro disable_fiq
.endm
+#if !defined(CONFIG_ARCH_SH73A0)
.macro get_irqnr_preamble, base, tmp
ldr \base, =INTFLGA
.endm
@@ -37,3 +38,80 @@
1000:
.endm
+#else
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware/gic.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =(0xf0000100)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+/*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt. We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+ /* bits 12-10 = src CPU, 9-0 = int # */
+
+ ldr \tmp, =1021
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved.. */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
+#endif
--- 0001/arch/arm/mach-shmobile/include/mach/irqs.h
+++ work/arch/arm/mach-shmobile/include/mach/irqs.h 2010-11-17 19:25:51.000000000 +0900
@@ -3,6 +3,9 @@
#define NR_IRQS 512
+/* GIC */
+#define gic_spi(nr) ((nr) + 32)
+
/* INTCA */
#define evt2irq(evt) (((evt) >> 5) - 16)
#define irq2evt(irq) (((irq) + 16) << 5)
--- /dev/null
+++ work/arch/arm/mach-shmobile/include/mach/sh73a0.h 2010-11-17 19:25:52.000000000 +0900
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH73A0_H__
+#define __ASM_SH73A0_H__
+
+/* This will soon be replaced by pinmux enums */
+
+#endif /* __ASM_SH73A0_H__ */
--- /dev/null
+++ work/arch/arm/mach-shmobile/setup-sh73a0.c 2010-11-17 19:25:52.000000000 +0900
@@ -0,0 +1,234 @@
+/*
+ * sh73a0 processor support
+ *
+ * Copyright (C) 2010 Takashi Yoshii
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(72), gic_spi(72),
+ gic_spi(72), gic_spi(72) },
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(73), gic_spi(73),
+ gic_spi(73), gic_spi(73) },
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(74), gic_spi(74),
+ gic_spi(74), gic_spi(74) },
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(75), gic_spi(75),
+ gic_spi(75), gic_spi(75) },
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(78), gic_spi(78),
+ gic_spi(78), gic_spi(78) },
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(79), gic_spi(79),
+ gic_spi(79), gic_spi(79) },
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6cc0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(156), gic_spi(156),
+ gic_spi(156), gic_spi(156) },
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+static struct plat_sci_port scif7_platform_data = {
+ .mapbase = 0xe6cd0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { gic_spi(143), gic_spi(143),
+ gic_spi(143), gic_spi(143) },
+};
+
+static struct platform_device scif7_device = {
+ .name = "sh-sci",
+ .id = 7,
+ .dev = {
+ .platform_data = &scif7_platform_data,
+ },
+};
+
+static struct plat_sci_port scif8_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFB,
+ .irqs = { gic_spi(80), gic_spi(80),
+ gic_spi(80), gic_spi(80) },
+};
+
+static struct platform_device scif8_device = {
+ .name = "sh-sci",
+ .id = 8,
+ .dev = {
+ .platform_data = &scif8_platform_data,
+ },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(65),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &scif7_device,
+ &scif8_device,
+ &cmt10_device,
+};
+
+void __init sh73a0_add_standard_devices(void)
+{
+ platform_add_devices(sh73a0_early_devices,
+ ARRAY_SIZE(sh73a0_early_devices));
+}
+
+void __init sh73a0_add_early_devices(void)
+{
+ early_platform_add_devices(sh73a0_early_devices,
+ ARRAY_SIZE(sh73a0_early_devices));
+}
--- 0001/arch/arm/mm/Kconfig
+++ work/arch/arm/mm/Kconfig 2010-11-17 19:25:51.000000000 +0900
@@ -772,7 +772,7 @@ config CACHE_L2X0
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
--- 0001/drivers/serial/sh-sci.h
+++ work/drivers/serial/sh-sci.h 2010-11-17 19:25:51.000000000 +0900
@@ -31,6 +31,7 @@
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
@@ -244,6 +245,7 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
@@ -280,6 +282,7 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
@@ -378,6 +381,7 @@
}
#if defined(CONFIG_CPU_SH3) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
@@ -391,6 +395,7 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377)
#define SCIF_FNS(name, scif_offset, scif_size) \
@@ -433,6 +438,7 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377)
@@ -632,6 +638,7 @@ static inline int sci_rxd_in(struct uart
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
More information about the linux-arm-kernel
mailing list