[PATCH 23/33] Removing dead BACKLIGHT_CORGI

[Eric Miao]

On Thu, Jul 1, 2010 at 12:01 AM, Christoph Egger <siccegge at cs.fau.de> wrote:
> BACKLIGHT_CORGI doesn't exist in Kconfig, therefore removing all
> references for it from the source code.
>
> Signed-off-by: Christoph Egger <siccegge at cs.fau.de>

BACKLIGHT_CORGI was renamed to BACKLIGHT_GENERIC in commit
d00ba726725c6f41e43df00f83e484ba8f9fac5c.

Since it's now safe to completely transition to LCD_CORGI, which not only
includes the backlight functionality but also the LCD, so

Acked-by: Eric Miao <eric.y.miao at gmail.com>

> ---
>  arch/arm/mach-pxa/corgi_pm.c   |    2 --
>  arch/arm/mach-pxa/sharpsl_pm.c |   15 ---------------
>  arch/arm/mach-pxa/spitz_pm.c   |    2 --
>  3 files changed, 0 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
> index 3f1dc74..a735205 100644
> --- a/arch/arm/mach-pxa/corgi_pm.c
> +++ b/arch/arm/mach-pxa/corgi_pm.c
> @@ -165,8 +165,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
>        .should_wakeup   = corgi_should_wakeup,
>  #if defined(CONFIG_LCD_CORGI)
>        .backlight_limit = corgi_lcd_limit_intensity,
> -#elif defined(CONFIG_BACKLIGHT_CORGI)
> -       .backlight_limit = corgibl_limit_intensity,
>  #endif
>        .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
>        .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
> index cb47672..582701e 100644
> --- a/arch/arm/mach-pxa/sharpsl_pm.c
> +++ b/arch/arm/mach-pxa/sharpsl_pm.c
> @@ -277,21 +277,6 @@ static void sharpsl_battery_thread(struct work_struct *private_)
>        dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
>                        sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
>
> -#ifdef CONFIG_BACKLIGHT_CORGI
> -       /* If battery is low. limit backlight intensity to save power. */
> -       if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
> -           && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
> -           || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
> -               if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
> -                       sharpsl_pm.machinfo->backlight_limit(1);
> -                       sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
> -               }
> -       } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
> -               sharpsl_pm.machinfo->backlight_limit(0);
> -               sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
> -       }
> -#endif
> -
>        /* Suspend if critical battery level */
>        if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
>             && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
> diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
> index 4209ddf..b36f0ae 100644
> --- a/arch/arm/mach-pxa/spitz_pm.c
> +++ b/arch/arm/mach-pxa/spitz_pm.c
> @@ -212,8 +212,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
>        .should_wakeup    = spitz_should_wakeup,
>  #if defined(CONFIG_LCD_CORGI)
>        .backlight_limit = corgi_lcd_limit_intensity,
> -#elif defined(CONFIG_BACKLIGHT_CORGI)
> -       .backlight_limit  = corgibl_limit_intensity,
>  #endif
>        .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
>        .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
> --
> 1.7.0.4
>
>