[PATCH 12/61] ARM: mx3/mx31ads: fold board header in its only user

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Thu Jun 24 09:49:08 EDT 2010


Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/mach-mx3/mach-mx31ads.c               |   43 +++++++--
 arch/arm/plat-mxc/include/mach/board-mx31ads.h |  117 ------------------------
 2 files changed, 36 insertions(+), 124 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h

diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a18..ed34b61 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -33,7 +33,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
@@ -45,12 +44,42 @@
 
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
-- 
1.7.1




More information about the linux-arm-kernel mailing list