[PATCH v2 2/4] ARM: S3C2416: Set name of the framebuffer device only if it present

[Marek Szyprowski]

Hello,

On Tuesday, June 22, 2010 5:22 PM Yauhen Kharuzhy wrote:

> Fix case when board doesn't have LCD connected and doesn't have
> corresponding platform device compiled.
> 
> Signed-off-by: Yauhen Kharuzhy <jekhor at gmail.com>
> ---
>  arch/arm/mach-s3c2416/s3c2416.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-
> s3c2416/s3c2416.c
> index 35dabcc..355ab62 100644
> --- a/arch/arm/mach-s3c2416/s3c2416.c
> +++ b/arch/arm/mach-s3c2416/s3c2416.c
> @@ -90,7 +90,9 @@ int __init s3c2416_init(void)
>  	s3c_i2c0_setname("s3c2440-i2c");
>  	s3c_i2c1_setname("s3c2440-i2c");
> 
> +#ifdef CONFIG_S3C_DEV_FB
>  	s3c_device_fb.name = "s3c2443-fb";
> +#endif

The above line should be rather removed completely in favor of a
solution proposed by Pawel Osciak in his s3c-fb patches:
http://www.spinics.net/lists/arm-kernel/msg90906.html

Best regards
--
Marek Szyprowski
Samsung Poland R&D Center