[PATCH] mx31lilly: prevent ulpi calls if !USB_CONFIG_ULPI

[Jonathan Cameron]

Signed-off-by: Jonathan Cameron <jic23 at cam.ac.uk>
---
 All of the mx3 boards that use ulpi are suitably protected.
 This currently makes mx3_defconfig fail as highlighted by
 Kautobuild.  Sorry for noise if a fix is already on it's way!

 arch/arm/mach-mx3/mach-mx31lilly.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index d3d5877..6827c68 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -114,6 +114,7 @@ static struct platform_device physmap_flash_device = {
 };
 
 /* USB */
+#if defined(CONFIG_USB_ULPI)
 
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -243,6 +244,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif /* USB_ULPI */
 
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
@@ -321,6 +323,7 @@ static void __init mx31lilly_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
+#if defined(CONFIG_USB_ULPI)
 	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
@@ -328,6 +331,7 @@ static void __init mx31lilly_board_init(void)
 
 	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 }
 
 static void __init mx31lilly_timer_init(void)
-- 
1.6.4.4