[PATCH] usb/host: Remove dead CONFIG_ARCH_KARO

[Ryan Mallon]

On 07/20/2010 07:08 PM, Christian Dietrich wrote:
> 
> CONFIG_ARCH_KARO doesn't exist in Kconfig and is never defined anywhere
> else, therefore removing all references for it from the source code.
> 
> Signed-off-by: Christian Dietrich <qy03fugy at stud.informatik.uni-erlangen.de>

Unless someone has a reason why the support needs to stay:

Acked-by: Ryan Mallon <ryan at bluewatersys.com>

> ---
>  drivers/usb/host/isp1362.h |   24 +-----------------------
>  1 files changed, 1 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
> index d995351..0f97820 100644
> --- a/drivers/usb/host/isp1362.h
> +++ b/drivers/usb/host/isp1362.h
> @@ -8,29 +8,7 @@
>  /*
>   * Platform specific compile time options
>   */
> -#if defined(CONFIG_ARCH_KARO)
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/pxa-regs.h>
> -#include <asm/arch/karo.h>
> -
> -#define USE_32BIT              1
> -
> -
> -/* These options are mutually eclusive */
> -#define USE_PLATFORM_DELAY    1
> -#define USE_NDELAY             0
> -/*
> - * MAX_ROOT_PORTS: Number of downstream ports
> - *
> - * The chip has two USB ports, one of which can be configured as
> - * an USB device port, so the value of this constant is implementation
> - * specific.
> - */
> -#define MAX_ROOT_PORTS         2
> -#define DUMMY_DELAY_ACCESS do {} while (0)
> -
> -/* insert platform specific definitions for other machines here */
> -#elif defined(CONFIG_BLACKFIN)
> +#if defined(CONFIG_BLACKFIN)
>  
>  #include <linux/io.h>
>  #define USE_32BIT              0


-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934