[PATCH 04/25] imx/mach-mx2: use constants namespaced by the corresponding SOC (easy part)

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Jan 8 11:17:11 EST 2010


This just leaves devices.c, generic.c and serial.c to clean up.  As
these files are used on more than one SOC they need some more work.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Cc: Holger Schurig <hs4233 at mail.mn-solutions.de>
Cc: Rabin Vincent <rabin at rab.in>
Cc: Javier Martin <javier.martin at vista-silicon.com>
Cc: Valentin Longchamp <valentin.longchamp at epfl.ch>
Cc: Jean Delvare <khali at linux-fr.org>
Cc: Eric Benard <eric at eukrea.com>
Cc: Ivo Clarysse <ivo.clarysse at gmail.com>
Cc: Vladimir Barinov <vbarinov at embeddedalley.com>
Cc: Daniel Schaeffer <daniel.schaeffer at timesys.com>
Cc: Simon POLETTE <spolette at adnlysd018.(none)>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Alan Carvalho de Assis <acassis at gmail.com>
Cc: Luotao Fu <l.fu at pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx21.c      |    5 +++--
 arch/arm/mach-mx2/clock_imx27.c      |    5 +++--
 arch/arm/mach-mx2/cpu_imx27.c        |    2 +-
 arch/arm/mach-mx2/eukrea_cpuimx27.c  |   12 ++++++------
 arch/arm/mach-mx2/mx21ads.c          |   10 +++++-----
 arch/arm/mach-mx2/mx27ads.c          |    6 +++---
 arch/arm/mach-mx2/mx27lite.c         |    4 ++--
 arch/arm/mach-mx2/mx27pdk.c          |    4 ++--
 arch/arm/mach-mx2/mxt_td60.c         |    4 ++--
 arch/arm/mach-mx2/pca100.c           |    4 ++--
 arch/arm/mach-mx2/pcm038.c           |    8 ++++----
 arch/arm/mach-mx2/pcm970-baseboard.c |    4 ++--
 12 files changed, 35 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 1922e53..6ab3c72 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -28,7 +28,7 @@
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#define IO_ADDR_CCM(off)	(IO_ADDRESS(CCM_BASE_ADDR) + (off))
+#define IO_ADDR_CCM(off)	(IO_ADDRESS(MX21_CCM_BASE_ADDR) + (off))
 
 /* Register offsets */
 #define CCM_CSCR		IO_ADDR_CCM(0x0)
@@ -1235,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index a533208..6db9856 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,7 +29,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
-#define IO_ADDR_CCM(off)	(IO_ADDRESS(CCM_BASE_ADDR) + (off))
+#define IO_ADDR_CCM(off)	(IO_ADDRESS(MX27_CCM_BASE_ADDR) + (off))
 
 /* Register offsets */
 #define CCM_CSCR		IO_ADDR_CCM(0x0)
@@ -757,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9..8c50c5e 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,7 @@ static void query_silicon_parameter(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index 7b18760..8e4f3d0 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
 		.irq = IRQ_GPIOB(23),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
 		.irq = IRQ_GPIOB(22),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
 		.irq = IRQ_GPIOB(27),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
 		.irq = IRQ_GPIOB(30),
 		.uartclk = 14745600,
 		.regshift = 1,
@@ -224,8 +224,8 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index cf5f77c..eb4a6e8 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 };
 
 static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
 	 */
 	{
 		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
 		.length = MX21ADS_MMIO_SIZE,
 		.type = MT_DEVICE,
 	},
@@ -284,8 +284,8 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 83e412b..385fc1c 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 		.length = SZ_1M,
 		.type = MT_DEVICE,
 	},
@@ -334,8 +334,8 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 82ea227..ca6ab12 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -85,8 +85,8 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 6761d1b..595fea4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -85,8 +85,8 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
index 8bcc1a5..9ed4e49 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -284,8 +284,8 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
index aea3d34..55dbf5a 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/pca100.c
@@ -233,8 +233,8 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 906d59b..a2e2ea1 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -108,8 +108,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -328,8 +328,8 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f45..60d5446 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),
-- 
1.6.5.2




More information about the linux-arm-kernel mailing list