[PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI

Linus Walleij linus.walleij at stericsson.com
Thu Feb 18 19:05:31 EST 2010


This employs the frequency setting mechanism introduced to the
MMCI to specify that this system can actually be clocked at 24 MHz.

Signed-off-by: Linus Walleij <linus.walleij at stericsson.com>
---
 arch/arm/mach-u300/mmc.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 109f5a6..c1cb977 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -101,6 +101,7 @@ int __devinit mmc_init(struct amba_device *adev)
 	 * we have a regulator we can control instead.
 	 */
 	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.f_max = 24000000;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
-- 
1.6.6




More information about the linux-arm-kernel mailing list