[PATCHv3 0/7] Initial Freescale i.MX51 SoC support

[Amit Kucheria]

On 10 Feb 10, Sascha Hauer wrote:
> Hi Amit,
> 
> On Tue, Feb 09, 2010 at 06:59:48PM +0200, Amit Kucheria wrote:
> > (patchset rebased on top of Sascha's tree and trivial fixes made)
> > git://git.pengutronix.de/git/imx/linux-2.6.git mxc-master
> > 
> > Will you consider merging it now?
> > 
> > Regards,
> > Amit
> > 
> > This series of patches adds basic support for i.MX5 family to the kernel. This
> > is just the bare minimum that brings up the board - sets up the clocks, IO
> > with a serial port and timers.
> > 
> > Features:
> > 
> >   * Console: Serial console using pre-existing drivers/serial/imx.c
> >   * Timer: Timer provided through arch/arm/plat-mxc/time.c
> >   * Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c
> >   * Clocks: Minimal Clock framework to allow board boot up
> >   * Defconfigs: mx51_defconfig provided
> > 
> > Tested on a i.MX51-based Babbage 2.5 board.
> > 
> > Git:
> > 
> > repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport
> 
> ok, merged for -next. BTW the correct branch is mx51-baseport-sascha.
> This shouldn't happen with the proper use of git request-pull.

I'll keep that in mind for the next set.

> Thanks for your work!

Thanks Sascha and everyone else for the reviews.

Regards,
Amit
-- 
----------------------------------------------------------------------
Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com
----------------------------------------------------------------------