[PATCH V3 00/63] Updating SPEAr Support
Russell King - ARM Linux
linux at arm.linux.org.uk
Thu Dec 23 07:13:57 EST 2010
You've just submitted this entire set to the patch system. I suspect
you're rushing to get these in so you can go away on vacation and hope
that someone merges them for you.
It's Christmas time, many people are probably not around or are otherwise
busy, and probably haven't looked at this patches.
I certainly haven't been over them again because I've spent the last four
days trying to get PL08x DMA support working properly - and I'm not looking
at them until the new year - I am entitied to a holiday too!
Now that you've buried everyone elses patches way down in the patch system,
I'm probably not going to even bother looking at the patch system again
until this coming merge window has been and gone.
On Mon, Dec 20, 2010 at 01:55:21PM +0530, Viresh Kumar wrote:
> Following set of patches:
> - updates SPEAr3xx, 6xx support
> - Adds support for SPEAr13xx
> - Removes Multiple defconfigs per machine family
>
> Changes since V2:
> - Following patches are removed from this patchset, as they are still under
> review:
> ST SPEAr: PCIE gadget suppport
> ST SPEAr13xx: Adding machine support for pci gadget
> ST SPEAr: Add smi driver for serial NOR flash
> ST SPEAr: Adding support for serial nor flash in all spear platforms
> - Following patches are already present in linus-next, so they are also removed
> from this patchset:
> mtd/fsmc.h: including linux/io.h for definition of readl
> Keyboard: Adding support for spear-keyboard
> USB host: Adding USB ehci & ohci support for spear platform
> - spear-keyboard machine support is updated according to updations in driver
> (driver is already in linus-next)
> - rtc driver is updated and ioctl routine is removed.
>
> Changes since V1:
> - sev definitions moved to system.h and removed from spear and omap archs
> - bug fix added in system controller file sp810.h
> - Review Comments incorporated
> - Driver and machine support are divided into separate patches
> - Nand Driver is removed from patch list as it is already floated by Linus
> Walleij.
> - Few later patches of SPEAr13xx Patches are merged with initial patches of
> SPEAr13xx
> - Smaller Defconfigs are used instead of large.
> - Clock renaming & minor corrections are moved to clock specific patches from
> peripheral machine support patches.
> - Removed Commented code related to SPI
> - [PATCH] Incrementing the ecc_pos array to contain 128 char - is removed from
> list
> - Board specific code is moved to *evb.c files from machine files for EMI NOR
> - replaced readl with __raw_readl in uncompress.h in plat-spear/include/plat/
>
> Rebased on: v2.6.37-rc6
>
> Bhupesh Sharma (1):
> ST SPEAr 13xx : Adding support for SPEAr1310
>
> Deepak Sikri (6):
> ST SPEAr: Adding machine support for USB host
> SPEAr Clock Framework: Adding support for PLL frequency change
> SPEAr Power Management: Added the support for Standby mode.
> GIC: Added dummy handlers for Power Management Suspend Resume
> SPEAr CPU freq: Adding support for CPU Freq framework
> ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms
>
> Pratyush Anand (1):
> ST SPEAr: Added PCIE host controller base driver support.
>
> Rajeev Kumar (4):
> rtc: Adding support for spear rtc
> ST SPEAr: Adding machine support for rtc-spear
> ST SPEAr: adding support for synopsis i2c designware
> ST SPEAr: Adding machine support for keyboard
>
> Ryan Mallon (5):
> SPEAr3xx: Make local structures static
> SPEAR3xx: Rename register/irq defines to remove naming conflicts
> SPEAr3xx: Rework pmx_dev code to remove conflicts
> SPEAr3xx: Rework KConfig to allow all boards to be compiled in
> SPEAr3xx: Replace defconfigs with single unified defconfig
>
> Shiraz Hashim (14):
> ARM: move sev definition to common system.h include file
> sp810 Fix: Switch to slow mode before sysctl_soft_reset
> ST SPEAr: Formalized timer support
> ST SPEAr13XX: Adding machine specific header files
> ST SPEAr13XX: Adding machine specific src files
> ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/
> ST SPEAr13XX: Added compilation support in arch/arm/
> ST SPEAr1300: Adding default config file
> ST SPEAr: Adding Debugfs support on clock framework
> ST SPEAr: Replacing SIZE macro's with actual required size
> SPEAr: defines base addresses as ulong.
> ST SPEAr13xx: add L2 cache support
> ST SPEAr13xx: Modified static mappings
> ST SPEAr: Adding information in Documentation/ and MAINTAINERS
>
> Vipin Kumar (7):
> ST SPEAr: Adding machine support for nand
> Newly erased page read workaround
> ST SPEAr : EMI (Extrenal Memory Interface) controller driver
> ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface
> driver
> SPEAr : Pad multiplexing handling modified
> SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic
> implementation
> SPEAr : Updating pad multiplexing support
>
> Vipul-kumar Samar (1):
> ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx
>
> Viresh Kumar (24):
> ST SPEAr: Padmux code Updated
> ST SPEAr: Making clock functions more generic
> ST SPEAr: Updating Clock Support
> ST SPEAr: Correcting SOC Config base address for spear320
> ST SPEAr: Adding PLGPIO driver for spear platform
> ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified
> resource size
> ST SPEAr: Adding support for ST's PWM IP
> ST SPEAr: Adding Watchdog support
> ST SPEAr: Adding support for SSP PL022
> ST SPEAr: Adding support for SDHCI (SDIO)
> ST SPEAr: Changing resource size of amba devices to SZ_4K
> ST SPEAr: Adding miscellaneous devices
> ST SPEAr: Adding support for DDR in clock framework
> ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in
> uncompress.h
> SPEAr: Adding and Updating Clock definitions
> ST SPEAr3xx: Passing pmx devices address from machine *.c files
> ST SPEAr Clock Framework: Updating for single image solution
> ST SPEAr: Appending spear3** with global structures
> ST SPEAr3xx: Updating plgpio and emi source to make it compliant with
> single image strategy
> SPEAr6xx: Rework Kconfig for single image solution
> ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig
> ST SPEAr13xx: Pass default padmux settings as parameter to
> spear13**_init routine
> ST SPEAr: Adding devices & clocks
> ST SPEAr: Updating defconfigs
>
> Documentation/arm/SPEAr/overview.txt | 34 +-
> MAINTAINERS | 6 +
> arch/arm/Kconfig | 9 +-
> arch/arm/Makefile | 2 +
> arch/arm/common/gic.c | 13 +
> arch/arm/configs/spear13xx_defconfig | 127 ++
> arch/arm/configs/spear300_defconfig | 51 -
> arch/arm/configs/spear310_defconfig | 52 -
> arch/arm/configs/spear320_defconfig | 52 -
> arch/arm/configs/spear3xx_defconfig | 119 ++
> arch/arm/configs/spear600_defconfig | 49 -
> arch/arm/configs/spear6xx_defconfig | 109 ++
> arch/arm/include/asm/hardware/sp810.h | 3 +
> arch/arm/include/asm/system.h | 7 +
> arch/arm/mach-spear13xx/Kconfig | 32 +
> arch/arm/mach-spear13xx/Makefile | 23 +
> arch/arm/mach-spear13xx/Makefile.boot | 3 +
> arch/arm/mach-spear13xx/clock.c | 1204 ++++++++++++++++++++
> arch/arm/mach-spear13xx/fsmc-nor.c | 85 ++
> arch/arm/mach-spear13xx/headsmp.S | 95 ++
> arch/arm/mach-spear13xx/hotplug.c | 135 +++
> arch/arm/mach-spear13xx/include/mach/clkdev.h | 19 +
> arch/arm/mach-spear13xx/include/mach/debug-macro.S | 14 +
> arch/arm/mach-spear13xx/include/mach/entry-macro.S | 88 ++
> arch/arm/mach-spear13xx/include/mach/generic.h | 276 +++++
> arch/arm/mach-spear13xx/include/mach/gpio.h | 37 +
> arch/arm/mach-spear13xx/include/mach/hardware.h | 37 +
> arch/arm/mach-spear13xx/include/mach/io.h | 19 +
> arch/arm/mach-spear13xx/include/mach/irqs.h | 153 +++
> arch/arm/mach-spear13xx/include/mach/memory.h | 19 +
> arch/arm/mach-spear13xx/include/mach/misc_regs.h | 386 +++++++
> arch/arm/mach-spear13xx/include/mach/pcie.h | 170 +++
> arch/arm/mach-spear13xx/include/mach/smp.h | 33 +
> arch/arm/mach-spear13xx/include/mach/spear.h | 95 ++
> arch/arm/mach-spear13xx/include/mach/spear1300.h | 21 +
> arch/arm/mach-spear13xx/include/mach/spear1310.h | 65 ++
> arch/arm/mach-spear13xx/include/mach/suspend.h | 47 +
> arch/arm/mach-spear13xx/include/mach/system.h | 39 +
> arch/arm/mach-spear13xx/include/mach/timex.h | 19 +
> arch/arm/mach-spear13xx/include/mach/uncompress.h | 19 +
> arch/arm/mach-spear13xx/include/mach/vmalloc.h | 18 +
> arch/arm/mach-spear13xx/localtimer.c | 25 +
> arch/arm/mach-spear13xx/pcie.c | 861 ++++++++++++++
> arch/arm/mach-spear13xx/platsmp.c | 200 ++++
> arch/arm/mach-spear13xx/pm.c | 107 ++
> arch/arm/mach-spear13xx/sleep.S | 435 +++++++
> arch/arm/mach-spear13xx/spear1300.c | 38 +
> arch/arm/mach-spear13xx/spear1300_evb.c | 168 +++
> arch/arm/mach-spear13xx/spear1310.c | 519 +++++++++
> arch/arm/mach-spear13xx/spear1310_evb.c | 222 ++++
> arch/arm/mach-spear13xx/spear13xx.c | 1085 ++++++++++++++++++
> arch/arm/mach-spear3xx/Kconfig | 30 +-
> arch/arm/mach-spear3xx/Kconfig300 | 17 -
> arch/arm/mach-spear3xx/Kconfig310 | 17 -
> arch/arm/mach-spear3xx/Kconfig320 | 17 -
> arch/arm/mach-spear3xx/Makefile | 4 +
> arch/arm/mach-spear3xx/clock.c | 576 ++++++++--
> arch/arm/mach-spear3xx/emi.c | 117 ++
> arch/arm/mach-spear3xx/include/mach/emi.h | 65 ++
> arch/arm/mach-spear3xx/include/mach/generic.h | 280 +++--
> arch/arm/mach-spear3xx/include/mach/gpio.h | 143 +++
> arch/arm/mach-spear3xx/include/mach/irqs.h | 206 ++--
> arch/arm/mach-spear3xx/include/mach/misc_regs.h | 12 +-
> arch/arm/mach-spear3xx/include/mach/spear.h | 134 +--
> arch/arm/mach-spear3xx/include/mach/spear300.h | 86 +-
> arch/arm/mach-spear3xx/include/mach/spear310.h | 85 +-
> arch/arm/mach-spear3xx/include/mach/spear320.h | 121 +--
> arch/arm/mach-spear3xx/include/mach/suspend.h | 44 +
> arch/arm/mach-spear3xx/spear300.c | 640 ++++++++---
> arch/arm/mach-spear3xx/spear300_evb.c | 114 ++-
> arch/arm/mach-spear3xx/spear310.c | 423 ++++++--
> arch/arm/mach-spear3xx/spear310_evb.c | 140 ++-
> arch/arm/mach-spear3xx/spear320.c | 844 +++++++++++----
> arch/arm/mach-spear3xx/spear320_evb.c | 125 ++-
> arch/arm/mach-spear3xx/spear3xx.c | 741 ++++++++++---
> arch/arm/mach-spear6xx/Kconfig | 15 +-
> arch/arm/mach-spear6xx/Kconfig600 | 17 -
> arch/arm/mach-spear6xx/clock.c | 438 ++++++--
> arch/arm/mach-spear6xx/include/mach/generic.h | 19 +-
> arch/arm/mach-spear6xx/include/mach/gpio.h | 27 +
> arch/arm/mach-spear6xx/include/mach/misc_regs.h | 12 +-
> arch/arm/mach-spear6xx/include/mach/spear.h | 174 +---
> arch/arm/mach-spear6xx/include/mach/suspend.h | 44 +
> arch/arm/mach-spear6xx/spear600_evb.c | 40 +-
> arch/arm/mach-spear6xx/spear6xx.c | 344 ++++++-
> arch/arm/mm/Kconfig | 2 +-
> arch/arm/plat-spear/Kconfig | 16 +
> arch/arm/plat-spear/Makefile | 21 +-
> arch/arm/plat-spear/clcd.c | 114 ++
> arch/arm/plat-spear/clock.c | 905 +++++++++++++---
> arch/arm/plat-spear/cpufreq.c | 159 +++
> arch/arm/plat-spear/i2c_eval_board.c | 29 +
> arch/arm/plat-spear/include/plat/clock.h | 189 +++-
> arch/arm/plat-spear/include/plat/fsmc.h | 51 +
> arch/arm/plat-spear/include/plat/gpio.h | 35 +
> arch/arm/plat-spear/include/plat/keyboard.h | 143 +++
> arch/arm/plat-spear/include/plat/padmux.h | 34 +-
> arch/arm/plat-spear/include/plat/spi.h | 74 ++
> arch/arm/plat-spear/include/plat/system.h | 2 +-
> arch/arm/plat-spear/include/plat/uncompress.h | 4 +-
> arch/arm/plat-spear/padmux.c | 54 +-
> arch/arm/plat-spear/plgpio.c | 474 ++++++++
> arch/arm/plat-spear/pll_clk.S | 187 +++
> arch/arm/plat-spear/pm.c | 104 ++
> arch/arm/plat-spear/pwm.c | 484 ++++++++
> arch/arm/plat-spear/sleep.S | 288 +++++
> arch/arm/plat-spear/time.c | 21 +-
> drivers/mtd/nand/fsmc_nand.c | 28 +-
> drivers/rtc/Kconfig | 8 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-spear.c | 534 +++++++++
> drivers/video/Kconfig | 14 +-
> include/linux/mtd/fsmc.h | 2 +
> 113 files changed, 15539 insertions(+), 1993 deletions(-)
> create mode 100644 arch/arm/configs/spear13xx_defconfig
> delete mode 100644 arch/arm/configs/spear300_defconfig
> delete mode 100644 arch/arm/configs/spear310_defconfig
> delete mode 100644 arch/arm/configs/spear320_defconfig
> create mode 100644 arch/arm/configs/spear3xx_defconfig
> delete mode 100644 arch/arm/configs/spear600_defconfig
> create mode 100644 arch/arm/configs/spear6xx_defconfig
> create mode 100644 arch/arm/mach-spear13xx/Kconfig
> create mode 100644 arch/arm/mach-spear13xx/Makefile
> create mode 100644 arch/arm/mach-spear13xx/Makefile.boot
> create mode 100644 arch/arm/mach-spear13xx/clock.c
> create mode 100644 arch/arm/mach-spear13xx/fsmc-nor.c
> create mode 100644 arch/arm/mach-spear13xx/headsmp.S
> create mode 100644 arch/arm/mach-spear13xx/hotplug.c
> create mode 100644 arch/arm/mach-spear13xx/include/mach/clkdev.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S
> create mode 100644 arch/arm/mach-spear13xx/include/mach/entry-macro.S
> create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/io.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/memory.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/misc_regs.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/pcie.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/smp.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1300.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/suspend.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/system.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h
> create mode 100644 arch/arm/mach-spear13xx/include/mach/vmalloc.h
> create mode 100644 arch/arm/mach-spear13xx/localtimer.c
> create mode 100644 arch/arm/mach-spear13xx/pcie.c
> create mode 100644 arch/arm/mach-spear13xx/platsmp.c
> create mode 100644 arch/arm/mach-spear13xx/pm.c
> create mode 100644 arch/arm/mach-spear13xx/sleep.S
> create mode 100644 arch/arm/mach-spear13xx/spear1300.c
> create mode 100644 arch/arm/mach-spear13xx/spear1300_evb.c
> create mode 100644 arch/arm/mach-spear13xx/spear1310.c
> create mode 100644 arch/arm/mach-spear13xx/spear1310_evb.c
> create mode 100644 arch/arm/mach-spear13xx/spear13xx.c
> delete mode 100644 arch/arm/mach-spear3xx/Kconfig300
> delete mode 100644 arch/arm/mach-spear3xx/Kconfig310
> delete mode 100644 arch/arm/mach-spear3xx/Kconfig320
> create mode 100644 arch/arm/mach-spear3xx/emi.c
> create mode 100644 arch/arm/mach-spear3xx/include/mach/emi.h
> create mode 100644 arch/arm/mach-spear3xx/include/mach/suspend.h
> delete mode 100644 arch/arm/mach-spear6xx/Kconfig600
> create mode 100644 arch/arm/mach-spear6xx/include/mach/suspend.h
> create mode 100644 arch/arm/plat-spear/clcd.c
> create mode 100644 arch/arm/plat-spear/cpufreq.c
> create mode 100644 arch/arm/plat-spear/i2c_eval_board.c
> create mode 100644 arch/arm/plat-spear/include/plat/fsmc.h
> create mode 100644 arch/arm/plat-spear/include/plat/keyboard.h
> create mode 100644 arch/arm/plat-spear/include/plat/spi.h
> create mode 100644 arch/arm/plat-spear/plgpio.c
> create mode 100644 arch/arm/plat-spear/pll_clk.S
> create mode 100644 arch/arm/plat-spear/pm.c
> create mode 100644 arch/arm/plat-spear/pwm.c
> create mode 100644 arch/arm/plat-spear/sleep.S
> create mode 100644 drivers/rtc/rtc-spear.c
>
> --
> 1.7.2.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list