[PATCH 1/7] omap3630: nand: fix device size to work in polled mode

Ghorai, Sukumar s-ghorai at ti.com
Wed Dec 22 04:24:07 EST 2010



> -----Original Message-----
> From: Tony Lindgren [mailto:tony at atomide.com]
> Sent: Saturday, December 18, 2010 5:34 AM
> To: Ghorai, Sukumar
> Cc: linux-omap at vger.kernel.org; linux-mtd at lists.infradead.org; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH 1/7] omap3630: nand: fix device size to work in polled
> mode
> 
> * Sukumar Ghorai <s-ghorai at ti.com> [101126 07:25]:
> > zoom3 and 3630-sdp having the x16 nand device.
> > This patch configure gpmc as x16 and select the currect function in
> driver
> > for polled mode (without prefetch enable) transfer.
> >
> > Signed-off-by: Sukumar Ghorai <s-ghorai at ti.com>
> > ---
> >  arch/arm/mach-omap2/board-flash.c |    3 +++
> >  1 files changed, 3 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-
> omap2/board-flash.c
> > index fd38c05..001c605 100644
> > --- a/arch/arm/mach-omap2/board-flash.c
> > +++ b/arch/arm/mach-omap2/board-flash.c
> > @@ -145,6 +145,9 @@ __init board_nand_init(struct mtd_partition
> *nand_parts, u8 nr_parts, u8 cs)
> >  	board_nand_data.parts		= nand_parts;
> >  	board_nand_data.nr_parts		= nr_parts;
> >
> > +	if (cpu_is_omap3630())
> > +		board_nand_data.devsize = 1;
> > +
> >  	gpmc_nand_init(&board_nand_data);
> >  }
> >  #else
> 
> I guess this is board specific for the size, not omap specific?
[Ghorai] Agree, the NAND type (i.e. x8 NAND or x16 NAND) is a board specific,
So I will change the definition of board_nand_init() to pass the devsize form board file.
And I will submit the patch-series again.



More information about the linux-arm-kernel mailing list