[PATCH V3 26/63] ST SPEAr: Added PCIE host controller base driver support.

Viresh Kumar viresh.kumar at st.com
Mon Dec 20 03:25:46 EST 2010


From: Pratyush Anand <pratyush.anand at st.com>

SPEAr13xx family contains Synopsys designware PCIE version 3.30a. This
patch adds support for this PCIE module for spear platform.

Signed-off-by: Pratyush Anand <pratyush.anand at st.com>
Signed-off-by: shiraz hashim <shiraz.hashim at st.com>
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
 arch/arm/Kconfig                                 |    5 +-
 arch/arm/mach-spear13xx/Makefile                 |    1 +
 arch/arm/mach-spear13xx/include/mach/hardware.h  |    7 +
 arch/arm/mach-spear13xx/include/mach/irqs.h      |   25 +-
 arch/arm/mach-spear13xx/include/mach/misc_regs.h |   20 +
 arch/arm/mach-spear13xx/include/mach/pcie.h      |  170 +++++
 arch/arm/mach-spear13xx/pcie.c                   |  861 ++++++++++++++++++++++
 arch/arm/mach-spear13xx/spear1300_evb.c          |   31 +
 arch/arm/mach-spear13xx/spear13xx.c              |   28 +
 arch/arm/plat-spear/Kconfig                      |    1 +
 10 files changed, 1144 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-spear13xx/include/mach/pcie.h
 create mode 100644 arch/arm/mach-spear13xx/pcie.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7c8ba2c..28223ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1164,7 +1164,9 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB ||\
+	ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX ||\
+	ARCH_SPEAR13XX
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1191,6 +1193,7 @@ config PCI_HOST_ITE8152
 	select DMABOUNCE
 
 source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
index cb5ae9e..4f1cbc5 100644
--- a/arch/arm/mach-spear13xx/Makefile
+++ b/arch/arm/mach-spear13xx/Makefile
@@ -6,6 +6,7 @@
 obj-y					+= spear13xx.o clock.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
+obj-$(CONFIG_PCIEPORTBUS)		+= pcie.o
 
 # spear1300 specific files
 obj-$(CONFIG_MACH_SPEAR1300)		+= spear1300.o
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
index 0047d75..4abc2c0 100644
--- a/arch/arm/mach-spear13xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear13xx/include/mach/hardware.h
@@ -22,4 +22,11 @@
 /* typesafe io address */
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
+#if defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	0
+#endif
+
+
 #endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
index 10b64c1..d2bfbb1 100644
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -80,9 +80,9 @@
 #define IRQ_USBH_OHCI0		(IRQ_SHPI_START + 65)
 #define IRQ_USBH_EHCI1		(IRQ_SHPI_START + 66)
 #define IRQ_USBH_OHCI1		(IRQ_SHPI_START + 67)
-#define IRQ_PCIE1		(IRQ_SHPI_START + 68)
-#define IRQ_PCIE2		(IRQ_SHPI_START + 69)
-#define IRQ_PCIE3		(IRQ_SHPI_START + 70)
+#define IRQ_PCIE0		(IRQ_SHPI_START + 68)
+#define IRQ_PCIE1		(IRQ_SHPI_START + 69)
+#define IRQ_PCIE2		(IRQ_SHPI_START + 70)
 
 #define IRQ_GIC_END		(IRQ_SHPI_START + 128)
 
@@ -93,7 +93,24 @@
 #define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
 #define SPEAR_GPIO_INT_END	(SPEAR_GPIO1_INT_BASE + 8)
 
-#define VIRQ_END		SPEAR_GPIO_INT_END
+/* PCIE MSI virtual irqs */
+#define SPEAR_NUM_MSI_IRQS	64
+#define SPEAR_MSI0_INT_BASE	(SPEAR_GPIO_INT_END + 0)
+#define SPEAR_MSI0_INT_END	(SPEAR_MSI0_INT_BASE + SPEAR_NUM_MSI_IRQS)
+#define SPEAR_MSI1_INT_BASE	(SPEAR_MSI0_INT_END + 0)
+#define SPEAR_MSI1_INT_END	(SPEAR_MSI1_INT_BASE + SPEAR_NUM_MSI_IRQS)
+#define SPEAR_MSI2_INT_BASE	(SPEAR_MSI1_INT_END + 0)
+#define SPEAR_MSI2_INT_END	(SPEAR_MSI2_INT_BASE + SPEAR_NUM_MSI_IRQS)
+
+#define SPEAR_NUM_INTX_IRQS	4
+#define SPEAR_INTX0_BASE	(SPEAR_MSI2_INT_END + 0)
+#define SPEAR_INTX0_END		(SPEAR_INTX0_BASE + SPEAR_NUM_INTX_IRQS)
+#define SPEAR_INTX1_BASE	(SPEAR_INTX0_END + 0)
+#define SPEAR_INTX1_END		(SPEAR_INTX1_BASE + SPEAR_NUM_INTX_IRQS)
+#define SPEAR_INTX2_BASE	(SPEAR_INTX1_END + 0)
+#define SPEAR_INTX2_END		(SPEAR_INTX2_BASE + SPEAR_NUM_INTX_IRQS)
+
+#define VIRQ_END		SPEAR_INTX2_END
 #define NR_IRQS			VIRQ_END
 
 #endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/misc_regs.h b/arch/arm/mach-spear13xx/include/mach/misc_regs.h
index e6823db..a7ba6cb 100644
--- a/arch/arm/mach-spear13xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear13xx/include/mach/misc_regs.h
@@ -202,6 +202,26 @@
 #define USBPHY_P2_CFG		((unsigned int *)(MISC_BASE + 0x31c))
 #define USBPHY_P3_CFG		((unsigned int *)(MISC_BASE + 0x320))
 #define PCIE_CFG		((unsigned int *)(MISC_BASE + 0x324))
+	/* PCIE CFG MASks */
+	#define PCIE2_CFG_AUX_CLK	(1 << 0)
+	#define PCIE1_CFG_AUX_CLK	(1 << 1)
+	#define PCIE0_CFG_AUX_CLK	(1 << 2)
+	#define PCIE2_CFG_CORE_CLK	(1 << 3)
+	#define PCIE1_CFG_CORE_CLK	(1 << 4)
+	#define PCIE0_CFG_CORE_CLK	(1 << 5)
+	#define PCIE2_CFG_POWERUP_RESET	(1 << 6)
+	#define PCIE1_CFG_POWERUP_RESET	(1 << 7)
+	#define PCIE0_CFG_POWERUP_RESET	(1 << 8)
+	#define PCIE2_CFG_DEVICE_PRESENT	(1 << 9)
+	#define PCIE1_CFG_DEVICE_PRESENT	(1 << 10)
+	#define PCIE0_CFG_DEVICE_PRESENT	(1 << 11)
+	#define PCIE0_CFG_VAL	(PCIE0_CFG_AUX_CLK | PCIE0_CFG_CORE_CLK \
+			| PCIE0_CFG_POWERUP_RESET | PCIE0_CFG_DEVICE_PRESENT)
+	#define PCIE1_CFG_VAL	(PCIE1_CFG_AUX_CLK | PCIE1_CFG_CORE_CLK \
+			| PCIE1_CFG_POWERUP_RESET | PCIE1_CFG_DEVICE_PRESENT)
+	#define PCIE2_CFG_VAL	(PCIE2_CFG_AUX_CLK | PCIE2_CFG_CORE_CLK \
+			| PCIE2_CFG_POWERUP_RESET | PCIE2_CFG_DEVICE_PRESENT)
+
 #define PCIE_MIPHY_CFG		((unsigned int *)(MISC_BASE + 0x328))
 #define PERIP_CFG		((unsigned int *)(MISC_BASE + 0x32c))
 	#define MCIF_SEL_SHIFT	3
diff --git a/arch/arm/mach-spear13xx/include/mach/pcie.h b/arch/arm/mach-spear13xx/include/mach/pcie.h
new file mode 100644
index 0000000..fa302e5
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/pcie.h
@@ -0,0 +1,170 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/pcie.h
+ *
+ * Spear SoC PCIe handling.
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand <pratyush.anand at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_PCIE_H
+#define __MACH_PCIE_H
+
+extern int (*pcie_port_is_host)(int port);
+extern int enable_pcie0_clk(void);
+
+
+struct pcie_port {
+	u8			port;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	void __iomem		*app_base;
+	void __iomem		*va_app_base;
+	void __iomem		*va_dbi_base;
+	void __iomem		*va_cfg0_base;
+	spinlock_t		conf_lock;
+	char			mem_space_name[16];
+	char			io_space_name[16];
+	struct resource		res[2];
+};
+
+struct pcie_app_reg {
+	u32	app_ctrl_0;		/*cr0*/
+	u32	app_ctrl_1;		/*cr1*/
+	u32	app_status_0;		/*cr2*/
+	u32	app_status_1;		/*cr3*/
+	u32	msg_status;		/*cr4*/
+	u32	msg_payload;		/*cr5*/
+	u32	int_sts;		/*cr6*/
+	u32	int_clr;		/*cr7*/
+	u32	int_mask;		/*cr8*/
+	u32	mst_bmisc;		/*cr9*/
+	u32	phy_ctrl;		/*cr10*/
+	u32	phy_status;		/*cr11*/
+	u32	cxpl_debug_info_0;	/*cr12*/
+	u32	cxpl_debug_info_1;	/*cr13*/
+	u32	ven_msg_ctrl_0;		/*cr14*/
+	u32	ven_msg_ctrl_1;		/*cr15*/
+	u32	ven_msg_data_0;		/*cr16*/
+	u32	ven_msg_data_1;		/*cr17*/
+	u32	ven_msi_0;		/*cr18*/
+	u32	ven_msi_1;		/*cr19*/
+	u32	mst_rmisc;		/*cr 20*/
+	u32	slv_awmisc;		/*cr 21*/
+	u32	slv_armisc;		/*cr 22*/
+	u32	pom0_mem_addr_start;	/*cr23*/
+	u32	pom1_mem_addr_start;	/*cr24*/
+	u32	pom_io_addr_start;	/*cr25*/
+	u32	pom_cfg0_addr_start;	/*cr26*/
+	u32	pom_cfg1_addr_start;	/*cr27*/
+	u32	in0_mem_addr_start;	/*cr28*/
+	u32	in1_mem_addr_start;	/*cr29*/
+	u32	in_io_addr_start;	/*cr30*/
+	u32	in_cfg0_addr_start;	/*cr31*/
+	u32	in_cfg1_addr_start;	/*cr32*/
+	u32	in_msg_addr_start;	/*cr33*/
+	u32	in0_mem_addr_limit;	/*cr34*/
+	u32	in1_mem_addr_limit;	/*cr35*/
+	u32	in_io_addr_limit;	/*cr36*/
+	u32	in_cfg0_addr_limit;	/*cr37*/
+	u32	in_cfg1_addr_limit;	/*cr38*/
+	u32	in_msg_addr_limit;	/*cr39*/
+	u32	mem0_addr_offset_limit;	/*cr40*/
+	u32	pim0_mem_addr_start;	/*cr41*/
+	u32	pim1_mem_addr_start;	/*cr42*/
+	u32	pim_io_addr_start;	/*cr43*/
+	u32	pim_rom_addr_start;	/*cr44*/
+};
+
+/*CR0 ID*/
+#define RX_LANE_FLIP_EN_ID	0
+#define TX_LANE_FLIP_EN_ID	1
+#define SYS_AUX_PWR_DET_ID	2
+#define APP_LTSSM_ENABLE_ID	3
+#define SYS_ATTEN_BUTTON_PRESSED_ID	4
+#define SYS_MRL_SENSOR_STATE_ID 5
+#define SYS_PWR_FAULT_DET_ID	6
+#define SYS_MRL_SENSOR_CHGED_ID 7
+#define SYS_PRE_DET_CHGED_ID	8
+#define SYS_CMD_CPLED_INT_ID	9
+#define APP_INIT_RST_0_ID	11
+#define APP_REQ_ENTR_L1_ID	12
+#define APP_READY_ENTR_L23_ID	13
+#define APP_REQ_EXIT_L1_ID	14
+#define DEVICE_TYPE_EP		(0 << 25)
+#define DEVICE_TYPE_LEP		(1 << 25)
+#define DEVICE_TYPE_RC		(4 << 25)
+#define SYS_INT_ID		29
+#define MISCTRL_EN_ID		30
+#define REG_TRANSLATION_ENABLE	31
+
+/*CR1 ID*/
+#define APPS_PM_XMT_TURNOFF_ID	2
+#define APPS_PM_XMT_PME_ID	5
+
+/*CR3 ID*/
+#define XMLH_LTSSM_STATE_ID	0
+#define XMLH_LTSSM_STATE_L0	((u32)0x11 << XMLH_LTSSM_STATE_ID)
+#define XMLH_LTSSM_STATE_MASK	((u32)0x1F << XMLH_LTSSM_STATE_ID)
+#define XMLH_LINK_UP_ID	5
+
+/*CR4 ID*/
+#define CFG_MSI_EN_ID	18
+
+/*CR6*/
+#define INTA_CTRL_INT	(1 << 7)
+#define INTB_CTRL_INT	(1 << 8)
+#define INTC_CTRL_INT	(1 << 9)
+#define INTD_CTRL_INT	(1 << 10)
+#define MSI_CTRL_INT	(1 << 26)
+
+/*CR19 ID*/
+#define VEN_MSI_REQ_ID	11
+#define VEN_MSI_FUN_NUM_ID	8
+#define VEN_MSI_TC_ID	5
+#define VEN_MSI_VECTOR_ID	0
+#define VEN_MSI_REQ_EN	((u32)0x1 << VEN_MSI_REQ_ID)
+#define VEN_MSI_FUN_NUM_MASK	((u32)0x7 << VEN_MSI_FUN_NUM_ID)
+#define VEN_MSI_TC_MASK	((u32)0x7 << VEN_MSI_TC_ID)
+#define VEN_MSI_VECTOR_MASK	((u32)0x1F << VEN_MSI_VECTOR_ID)
+#endif
+
+/*CE21-22 ID*/
+/*ID definitio of ARMISC*/
+#define AXI_OP_TYPE_ID	0
+#define AXI_OP_BCM_ID	5
+#define AXI_OP_EP_ID	6
+#define AXI_OP_TD_ID	7
+#define AXI_OP_ATTRIBUTE_ID	8
+#define AXI_OP_TC_ID	10
+#define AXI_OP_MSG_CODE_ID	13
+#define AXI_OP_DBI_ACCESS_ID	21
+#define AXI_OP_TYPE_MASK	0x1F
+#define AXI_OP_TYPE_MEM_RDRW	0
+#define AXI_OP_TYPE_MEM_RDRW_LOCKED	1
+#define AXI_OP_TYPE_IO_RDRW	2
+#define AXI_OP_TYPE_CONFIG_RDRW_TYPE0	4
+#define AXI_OP_TYPE_CONFIG_RDRW_TYPE1	5
+#define AXI_OP_TYPE_MSG_REQ	16
+#define AXI_OP_TYPE_COMPLETION	10
+#define AXI_OP_TYPE_COMPLETION_LOCKED	11
+#define AXI_OP_TYPE_DBI_ELBI_ENABLE	1
+
+/* synopsis specific PCIE configuration registers*/
+#define PCIE_MSI_ADDR_LO	0x820	/* 32 bits */
+#define PCIE_MSI_ADDR_HI	0x824	/* 32 bits */
+#define PCIE_MSI_INTR0_ENABLE	0x828	/* 32 bits */
+#define PCIE_MSI_INTR0_MASK	0x82C	/* 32 bits */
+#define PCIE_MSI_INTR0_STATUS	0x830	/* 32 bits */
+
+/*BAR MASK registers*/
+#define PCIE_BAR0_MASK_REG	0x1010
+
+static inline void pcie_init(int (*fptr)(int port))
+{
+	pcie_port_is_host = fptr;
+}
diff --git a/arch/arm/mach-spear13xx/pcie.c b/arch/arm/mach-spear13xx/pcie.c
new file mode 100644
index 0000000..869175e
--- /dev/null
+++ b/arch/arm/mach-spear13xx/pcie.c
@@ -0,0 +1,861 @@
+/*
+ * arch/arm/mach-spear13xx/pcie.c
+ *
+ * PCIe functions for SPEAr 13xx SoCs
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand <pratyush.anand at st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/mbus.h>
+#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/irq.h>
+#include <mach/pcie.h>
+#include <mach/irqs.h>
+#include <mach/misc_regs.h>
+
+#define NUM_PCIE_PORTS	3
+
+/* Sum of all these space can maximum be 256MB*/
+#define IN0_MEM_SIZE	(200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE	(0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE	(20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE	(1 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE	(1 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE	(1 * 1024 * 1024 - 1)
+
+#define MAX_LINK_UP_WAIT_JIFFIES	10
+
+int (*pcie_port_is_host)(int port);
+static struct pcie_port pcie_port[NUM_PCIE_PORTS];
+static u32 spr_pcie_base[NUM_PCIE_PORTS] = {
+	SPEAR13XX_PCIE0_BASE,
+	SPEAR13XX_PCIE1_BASE,
+	SPEAR13XX_PCIE2_BASE,
+};
+static u32 spr_pcie_app_base[NUM_PCIE_PORTS] = {
+	SPEAR13XX_PCIE0_APP_BASE,
+	SPEAR13XX_PCIE1_APP_BASE,
+	SPEAR13XX_PCIE2_APP_BASE,
+};
+
+/* Keeping all DDR area of 256MB accesible for inbound transaction */
+#define INBOUND_ADDR_MASK	0xFFFFFFF
+
+#ifdef CONFIG_PCI_MSI
+static DECLARE_BITMAP(msi_irq_in_use[NUM_PCIE_PORTS], SPEAR_NUM_MSI_IRQS);
+static unsigned int spear_msi_data[NUM_PCIE_PORTS];
+
+static void spear13xx_msi_init(struct pcie_port *pp);
+#endif
+
+static void spear_pcie_int_handler(unsigned int irq, struct irq_desc *desc);
+
+static void enable_dbi_access(struct pcie_app_reg *app_reg)
+{
+	/* Enable DBI access */
+	writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg *app_reg)
+{
+	/* disable DBI access */
+	writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct pcie_port *pp, int where, int size,
+		u32 *val)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *) pp->va_app_base;
+	u32 va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (u32)pp->va_dbi_base + (where & ~0x3);
+
+	*val = readl(va_address);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct pcie_port *pp, int where, int size,
+		u32 val)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *) pp->va_app_base;
+	u32 va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (u32)pp->va_dbi_base + (where & ~0x3);
+
+	if (size == 4)
+		writel(val, va_address);
+	else if (size == 2)
+		writew(val, va_address + (where & 2));
+	else if (size == 1)
+		writeb(val, va_address + (where & 3));
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+static int spear13xx_pcie_link_up(void __iomem *va_app_base)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *) va_app_base;
+	unsigned long deadline = jiffies + MAX_LINK_UP_WAIT_JIFFIES;
+
+	do {
+		if (readl(&app_reg->app_status_1) &
+				((u32)1 << XMLH_LINK_UP_ID))
+			return 1;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, deadline));
+
+	return 0;
+}
+
+static void spear13xx_pcie_host_init(struct pcie_port *pp)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *)pp->va_app_base;
+
+	/*setup registers for outbound translation */
+
+	writel(pp->base, &app_reg->in0_mem_addr_start);
+	writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+			&app_reg->in0_mem_addr_limit);
+	writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+			&app_reg->in1_mem_addr_limit);
+	writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+	writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+			&app_reg->in_io_addr_limit);
+	writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+	writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+			&app_reg->in_cfg0_addr_limit);
+	writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+	writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+			&app_reg->in_cfg1_addr_limit);
+	writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+	writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+			&app_reg->in_msg_addr_limit);
+
+	writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+	writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+	/*setup registers for inbound translation */
+
+	writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+	writel(0, &app_reg->pim0_mem_addr_start);
+	writel(0, &app_reg->pim1_mem_addr_start);
+	spear_dbi_write_reg(pp, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+	spear_dbi_write_reg(pp, PCI_BASE_ADDRESS_0, 4, 0);
+
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_rom_addr_start);
+
+	writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID)
+			| (1 << APP_LTSSM_ENABLE_ID)
+			| ((u32)1 << REG_TRANSLATION_ENABLE),
+			&app_reg->app_ctrl_0);
+}
+
+static void __init spear13xx_pcie_preinit(void)
+{
+	int i;
+	struct pcie_port *pp;
+	struct pcie_app_reg *app_reg;
+
+	for (i = 0; i < NUM_PCIE_PORTS; i++) {
+		pp = pcie_port + i;
+		app_reg = (struct pcie_app_reg *) (pp->va_app_base);
+
+		if (!(*pcie_port_is_host)(i))
+			continue;
+		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+			"PCIe %d MEM", pp->port);
+		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+		pp->res[0].name = pp->mem_space_name;
+		pp->res[0].start = app_reg->in0_mem_addr_start;
+		pp->res[0].end = app_reg->in0_mem_addr_limit;
+		pp->res[0].flags = IORESOURCE_MEM;
+
+		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+			"PCIe %d I/O", pp->port);
+		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+		pp->res[1].name = pp->io_space_name;
+		pp->res[1].start = app_reg->in_io_addr_start;
+		pp->res[1].end = app_reg->in_io_addr_limit;
+		pp->res[1].flags = IORESOURCE_IO;
+
+		if (request_resource(&iomem_resource, &pp->res[0]))
+			panic("can't allocate PCIe I/O space");
+		if (request_resource(&iomem_resource, &pp->res[1]))
+			panic("can't allocate PCIe MEM space");
+	}
+}
+
+static int __init spear13xx_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+	u32 val = 0;
+
+	if (nr >= NUM_PCIE_PORTS)
+		return 0;
+
+	if (!(*pcie_port_is_host)(nr))
+		return 0;
+
+	pp = &pcie_port[nr];
+	if (!spear13xx_pcie_link_up((void __iomem *)pp->va_app_base))
+		return 0;
+	pp->root_bus_nr = sys->busnr;
+
+	/* Generic PCIe unit setup.*/
+
+	/* Enable own BME. It is necessary to enable own BME to do a
+	 * memory transaction on a downstream device
+	 */
+	spear_dbi_read_reg(pp, PCI_COMMAND, 2, &val);
+	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+			| PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	spear_dbi_write_reg(pp, PCI_COMMAND, 2, val);
+
+	/* Need to come back here*/
+
+	sys->resource[0] = &pp->res[0];
+	sys->resource[1] = &pp->res[1];
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = NUM_PCIE_PORTS - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (!(*pcie_port_is_host)(i))
+			continue;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*If there is no link, then there is no device*/
+	if (!spear13xx_pcie_link_up((void __iomem *)pp->va_app_base))
+		return 0;
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 * we have only one slot on each root port.
+	 */
+	if (bus == pp->root_bus_nr && dev > 0)
+		return 0;
+	return 1;
+}
+
+static int spear13xx_pcie_rd_conf(struct pcie_port *pp, struct pci_bus *bus,
+		u32 devfn, int where, int size, u32 *val)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *) pp->va_app_base;
+	u32 address = (u32)pp->va_cfg0_base | (PCI_FUNC(devfn) << 16)
+		| (where & 0xFFFC);
+
+	writel((bus->number << 24) | (PCI_SLOT(devfn) << 19),
+			&app_reg->pom_cfg0_addr_start);
+	writel(readl(&app_reg->slv_armisc) & ~(AXI_OP_TYPE_MASK),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_armisc) | AXI_OP_TYPE_CONFIG_RDRW_TYPE0,
+			&app_reg->slv_armisc);
+
+	*val = readl(address);
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	writel(readl(&app_reg->slv_armisc) & ~(AXI_OP_TYPE_MASK),
+			&app_reg->slv_armisc);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = spear13xx_pcie_rd_conf(pp, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int spear13xx_pcie_wr_conf(struct pcie_port *pp, struct pci_bus *bus,
+		u32 devfn, int where, int size, u32 val)
+{
+	int ret = PCIBIOS_SUCCESSFUL;
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *) pp->va_app_base;
+	u32 address = (u32)pp->va_cfg0_base | (PCI_FUNC(devfn) << 16)
+			| (where & 0xFFFC);
+
+	writel((bus->number << 24) | (PCI_SLOT(devfn) << 19),
+			&app_reg->pom_cfg0_addr_start);
+	writel(readl(&app_reg->slv_awmisc) & ~(AXI_OP_TYPE_MASK),
+			&app_reg->slv_awmisc);
+	writel(readl(&app_reg->slv_awmisc) | AXI_OP_TYPE_CONFIG_RDRW_TYPE0,
+			&app_reg->slv_awmisc);
+	if (size == 4)
+		writel(val, address);
+	else if (size == 2)
+		writew(val, address + (where & 2));
+	else if (size == 1)
+		writeb(val, address + (where & 3));
+	else
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	writel(readl(&app_reg->slv_awmisc) & ~(AXI_OP_TYPE_MASK),
+			&app_reg->slv_awmisc);
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = spear13xx_pcie_wr_conf(pp, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static struct pci_bus __init *
+spear13xx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if ((nr < NUM_PCIE_PORTS) && (*pcie_port_is_host)(nr)) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init spear13xx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+	int irq = (SPEAR_INTX0_BASE + pp->port * SPEAR_NUM_INTX_IRQS + pin - 1);
+
+	return irq;
+}
+
+static struct hw_pci spear13xx_pci __initdata = {
+	.nr_controllers	= NUM_PCIE_PORTS,
+	.preinit	= spear13xx_pcie_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= spear13xx_pcie_setup,
+	.scan		= spear13xx_pcie_scan_bus,
+	.map_irq	= spear13xx_pcie_map_irq,
+};
+
+void mask_intx_irq(unsigned int irq)
+{
+	int irq_offset = (irq - SPEAR_INTX0_BASE) % SPEAR_NUM_INTX_IRQS;
+	int port = (irq - SPEAR_INTX0_BASE) / SPEAR_NUM_INTX_IRQS;
+	struct pcie_port *pp = &pcie_port[port];
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *)pp->va_app_base;
+
+	switch (irq_offset) {
+	case 0:
+		writel(readl(&app_reg->int_mask) & ~INTA_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 1:
+		writel(readl(&app_reg->int_mask) & ~INTB_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 2:
+		writel(readl(&app_reg->int_mask) & ~INTC_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 3:
+		writel(readl(&app_reg->int_mask) & ~INTD_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	}
+}
+
+void unmask_intx_irq(unsigned int irq)
+{
+	int irq_offset = (irq - SPEAR_INTX0_BASE) % SPEAR_NUM_INTX_IRQS;
+	int port = (irq - SPEAR_INTX0_BASE) / SPEAR_NUM_INTX_IRQS;
+	struct pcie_port *pp = &pcie_port[port];
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *)pp->va_app_base;
+
+	switch (irq_offset) {
+	case 0:
+		writel(readl(&app_reg->int_mask) | INTA_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 1:
+		writel(readl(&app_reg->int_mask) | INTB_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 2:
+		writel(readl(&app_reg->int_mask) | INTC_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	case 3:
+		writel(readl(&app_reg->int_mask) | INTD_CTRL_INT,
+				&app_reg->int_mask);
+		break;
+	}
+}
+
+static struct irq_chip spear13xx_intx_chip = {
+	.name = "PCI-INTX",
+	.mask = mask_intx_irq,
+	.unmask = unmask_intx_irq,
+};
+
+static void spear13xx_int_init(struct pcie_port *pp)
+{
+	int i, irq;
+	struct pcie_app_reg *app_reg;
+
+	set_irq_chained_handler(IRQ_PCIE0 + pp->port, spear_pcie_int_handler);
+
+#ifdef CONFIG_PCI_MSI
+	spear13xx_msi_init(pp);
+#endif
+	/* Enbale INTX interrupt*/
+	app_reg = (struct pcie_app_reg *)pp->va_app_base;
+	writel(readl(&app_reg->int_mask) | INTA_CTRL_INT
+			| INTB_CTRL_INT	| INTC_CTRL_INT
+			| INTD_CTRL_INT, &app_reg->int_mask);
+
+	/* initilize INTX chip here only. MSI chip will be
+	 * initilized dynamically.*/
+	irq = (SPEAR_INTX0_BASE + pp->port * SPEAR_NUM_INTX_IRQS);
+	for (i = 0; i < SPEAR_NUM_INTX_IRQS; i++) {
+		set_irq_chip_and_handler(irq + i, &spear13xx_intx_chip,
+				handle_simple_irq);
+		set_irq_flags(irq + i, IRQF_VALID);
+	}
+}
+
+static void __init add_pcie_port(int port, u32 base, u32 app_base)
+{
+	struct pcie_port *pp = &pcie_port[port];
+	struct pcie_app_reg *app_reg;
+
+	pp->port = port;
+	pp->root_bus_nr = -1;
+	pp->base = (void __iomem *)base;
+	pp->app_base = (void __iomem *)app_base;
+	pp->va_app_base = (void __iomem *) ioremap(app_base, 0x200);
+	if (!pp->va_app_base) {
+		pr_err("error with ioremap in function %s\n", __func__);
+		return;
+	}
+	pp->va_dbi_base = (void __iomem *) ioremap(base, 0x2000);
+	if (!pp->va_dbi_base) {
+		pr_err("error with ioremap in function %s\n", __func__);
+		return;
+	}
+	spin_lock_init(&pp->conf_lock);
+	memset(pp->res, 0, sizeof(pp->res));
+	pr_info("spear13xx PCIe port %d\n", port);
+	if (spear13xx_pcie_link_up((void __iomem *)pp->va_app_base)) {
+		pr_info("link up in bios\n");
+	} else {
+		pr_info("link down in bios\n");
+		spear13xx_pcie_host_init(pp);
+		spear13xx_int_init(pp);
+		app_reg = (struct pcie_app_reg *)pp->va_app_base;
+		pp->va_cfg0_base = (void __iomem *)
+			ioremap(app_reg->in_cfg0_addr_start, IN_CFG0_SIZE);
+		if (!pp->va_cfg0_base) {
+			pr_err("error with ioremap in function %s\n", __func__);
+			return;
+		}
+
+	}
+}
+
+static int __init spear13xx_pcie_init(void)
+{
+	int port;
+	struct clk *clk;
+
+	for (port = 0; port < NUM_PCIE_PORTS; port++) {
+		/* do not enable clock if it is PCIE0. Ideally , all controller
+		 * should have been independent from others with respect to
+		 * clock. But PCIE1 and 2 depends on PCIE0.So PCIE0 clk
+		 * is provided during board init.*/
+		if (port == 1) {
+			/* Ideally CFG Clock should have been also enabled
+			 * here. But it is done currently during board
+			 * init routne*/
+			clk = clk_get_sys("pcie1", NULL);
+			if (!clk) {
+				pr_err("%s:couldn't get clk for pcie1\n",
+						__func__);
+				continue;
+			}
+			if (clk_enable(clk)) {
+				pr_err("%s:couldn't enable clk for pcie1\n",
+						__func__);
+				continue;
+			}
+		} else if (port == 2) {
+			/* Ideally CFG Clock should have been also enabled
+			 * here. But it is done currently during board
+			 * init routne*/
+			clk = clk_get_sys("pcie2", NULL);
+			if (!clk) {
+				pr_err("%s:couldn't get clk for pcie2\n",
+						__func__);
+				continue;
+			}
+			if (clk_enable(clk)) {
+				pr_err("%s:couldn't enable clk for pcie2\n",
+						__func__);
+				continue;
+			}
+		}
+
+		if ((*pcie_port_is_host)(port))
+			add_pcie_port(port, spr_pcie_base[port],
+					spr_pcie_app_base[port]);
+	}
+
+	pci_common_init(&spear13xx_pci);
+
+	return 0;
+}
+subsys_initcall(spear13xx_pcie_init);
+
+#ifdef CONFIG_PCI_MSI
+/* MSI int handler
+ */
+static void handle_msi(struct pcie_port *pp)
+{
+	unsigned long val;
+	int i, pos;
+
+	for (i = 0; i < 8; i++) {
+		spear_dbi_read_reg(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
+				(u32 *)&val);
+		if (val) {
+			pos = 0;
+			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
+				generic_handle_irq(SPEAR_MSI0_INT_BASE
+					+ pp->port * SPEAR_NUM_MSI_IRQS
+					+ (i * 32) + pos);
+				pos++;
+			}
+		}
+		spear_dbi_write_reg(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4, val);
+	}
+}
+#else
+static void handle_msi(struct pcie_port *pp)
+{
+}
+#endif
+
+static void spear_pcie_int_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pcie_port *pp = &pcie_port[irq - IRQ_PCIE0];
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *)pp->va_app_base;
+	unsigned int status;
+
+	status = readl(&app_reg->int_sts);
+
+	desc->chip->ack(irq);
+
+	if (status & MSI_CTRL_INT) {
+		handle_msi(pp);
+		writel(MSI_CTRL_INT, &app_reg->int_clr);
+	} else if (status & INTA_CTRL_INT)
+		generic_handle_irq(SPEAR_INTX0_BASE
+				+ pp->port * SPEAR_NUM_INTX_IRQS);
+	else if (status & INTB_CTRL_INT)
+		generic_handle_irq(SPEAR_INTX0_BASE
+				+ pp->port * SPEAR_NUM_INTX_IRQS + 1);
+	else if (status & INTC_CTRL_INT)
+		generic_handle_irq(SPEAR_INTX0_BASE
+				+ pp->port * SPEAR_NUM_INTX_IRQS + 2);
+	else if (status & INTD_CTRL_INT)
+		generic_handle_irq(SPEAR_INTX0_BASE
+				+ pp->port * SPEAR_NUM_INTX_IRQS + 3);
+	else
+		writel(status, &app_reg->int_clr);
+
+	desc->chip->unmask(irq);
+}
+
+#ifdef CONFIG_PCI_MSI
+static int find_valid_pos0(int port, int nvec, int pos, int *pos0)
+{
+	int flag = 1;
+	do {
+		pos = find_next_zero_bit(msi_irq_in_use[port],
+				SPEAR_NUM_MSI_IRQS, pos);
+		/*if you have reached to the end then get out from here.*/
+		if (pos == SPEAR_NUM_MSI_IRQS)
+			return -ENOSPC;
+		/* Check if this position is at correct offset.nvec is always a
+		 * power of two. pos0 must be nvec bit alligned.
+		 */
+		if (pos % nvec)
+			pos += nvec - (pos % nvec);
+		else
+			flag = 0;
+	} while (flag);
+
+	*pos0 = pos;
+	return 0;
+}
+
+static void spear13xx_msi_nop(unsigned int irq)
+{
+	return;
+}
+
+static struct irq_chip spear13xx_msi_chip = {
+	.name = "PCI-MSI",
+	.ack = spear13xx_msi_nop,
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+/*
+ * Dynamic irq allocate and deallocation
+ */
+static int get_irq(int nvec, struct msi_desc *desc, int *pos)
+{
+	int res, bit, irq, pos0, pos1, i;
+	u32 val;
+	struct pcie_port *pp = bus_to_port(desc->dev->bus->number);
+
+	pos0 = find_first_zero_bit(msi_irq_in_use[pp->port],
+			SPEAR_NUM_MSI_IRQS);
+	if (pos0 % nvec) {
+		if (find_valid_pos0(pp->port, nvec, pos0, &pos0))
+			goto no_valid_irq;
+	}
+	if (nvec > 1) {
+		pos1 = find_next_bit(msi_irq_in_use[pp->port],
+				SPEAR_NUM_MSI_IRQS, pos0);
+		/* there must be nvec number of consecutive free bits */
+		while ((pos1 - pos0) < nvec) {
+			if (find_valid_pos0(pp->port, nvec, pos1, &pos0))
+				goto no_valid_irq;
+			pos1 = find_next_bit(msi_irq_in_use[pp->port],
+					SPEAR_NUM_MSI_IRQS, pos0);
+		}
+	}
+
+	irq = (SPEAR_MSI0_INT_BASE + (pp->port * SPEAR_NUM_MSI_IRQS)) + pos0;;
+
+	if ((irq + nvec) > (SPEAR_MSI0_INT_END
+				+ (pp->port * SPEAR_NUM_MSI_IRQS)))
+		goto no_valid_irq;
+
+	i = 0;
+	while (i < nvec) {
+		set_bit(pos0 + i, msi_irq_in_use[pp->port]);
+		dynamic_irq_init(irq + i);
+		set_irq_msi(irq + i, desc);
+		set_irq_chip_and_handler(irq + i, &spear13xx_msi_chip,
+				handle_simple_irq);
+
+		/* Enable corresponding interrupt on MSI interrupt
+		 * controller.
+		 */
+		res = ((pos0 + i) / 32) * 12;
+		bit = (pos0 + i) % 32;
+		spear_dbi_read_reg(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+		val |= 1 << bit;
+		spear_dbi_write_reg(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+
+		i++;
+	}
+
+	*pos = pos0;
+	return irq;
+no_valid_irq:
+	*pos = pos0;
+	return -ENOSPC;
+}
+
+static void clean_irq(unsigned int irq)
+{
+	int res, bit, val, pos;
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct pcie_port *pp = bus_to_port(desc->msi_desc->dev->bus->number);
+
+	pos = irq - (SPEAR_MSI0_INT_BASE + (pp->port * SPEAR_NUM_MSI_IRQS));
+
+	dynamic_irq_cleanup(irq);
+
+	clear_bit(pos, msi_irq_in_use[pp->port]);
+
+	/* Disable corresponding interrupt on MSI interrupt
+	 * controller.
+	 */
+	res = (pos / 32) * 12;
+	bit = pos % 32;
+	spear_dbi_read_reg(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+	val &= ~(1 << bit);
+	spear_dbi_write_reg(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+
+}
+
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+	int cvec, rvec, irq, pos;
+	struct msi_msg msg;
+	uint16_t control;
+	struct pcie_port *pp = bus_to_port(pdev->bus->number);
+
+	/*
+	 * Read the MSI config to figure out how many IRQs this device
+	 * wants.Most devices only want 1, which will give
+	 * configured_private_bits and request_private_bits equal 0.
+	 */
+	pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+			&control);
+
+	/*
+	 * If the number of private bits has been configured then use
+	 * that value instead of the requested number. This gives the
+	 * driver the chance to override the number of interrupts
+	 * before calling pci_enable_msi().
+	 */
+
+	cvec = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
+
+	if (cvec == 0) {
+		/* Nothing is configured, so use the hardware requested size */
+		rvec = (control & PCI_MSI_FLAGS_QMASK) >> 1;
+	} else {
+		/*
+		 * Use the number of configured bits, assuming the
+		 * driver wanted to override the hardware request
+		 * value.
+		 */
+		rvec = cvec;
+	}
+
+	/*
+	 * The PCI 2.3 spec mandates that there are at most 32
+	 * interrupts. If this device asks for more, only give it one.
+	 */
+	if (rvec > 5)
+		rvec = 0;
+
+	irq = get_irq((1 << rvec), desc, &pos);
+
+	 if (irq < 0)
+		return irq;
+
+	 /* Update the number of IRQs the device has available to it */
+	 control &= ~PCI_MSI_FLAGS_QSIZE;
+	 control |= rvec << 4;
+	 pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+			 control);
+	 desc->msi_attrib.multiple = rvec;
+
+	/* An EP will modify lower 8 bits(max) of msi data while
+	 * sending any msi interrupt
+	 */
+	msg.address_hi = 0x0;
+	msg.address_lo = __virt_to_phys((u32)(&spear_msi_data[pp->port]));
+	msg.data = pos;
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	clean_irq(irq);
+}
+
+static void spear13xx_msi_init(struct pcie_port *pp)
+{
+	struct pcie_app_reg *app_reg = (struct pcie_app_reg *)pp->va_app_base;
+
+	spear_dbi_write_reg(pp, PCIE_MSI_ADDR_LO, 4,
+			__virt_to_phys((u32)(&spear_msi_data[pp->port])));
+	spear_dbi_write_reg(pp, PCIE_MSI_ADDR_HI, 4, 0);
+	/* Enbale MSI interrupt*/
+	writel(readl(&app_reg->int_mask) | MSI_CTRL_INT,
+			&app_reg->int_mask);
+}
+#endif
diff --git a/arch/arm/mach-spear13xx/spear1300_evb.c b/arch/arm/mach-spear13xx/spear1300_evb.c
index 7ab1c11d0..0d1b01d 100644
--- a/arch/arm/mach-spear13xx/spear1300_evb.c
+++ b/arch/arm/mach-spear13xx/spear1300_evb.c
@@ -18,6 +18,7 @@
 #include <asm/mach-types.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
+#include <mach/pcie.h>
 #include <plat/keyboard.h>
 #include <plat/fsmc.h>
 
@@ -50,6 +51,30 @@ static struct kbd_platform_data kbd_data = {
 	.rep = 1,
 };
 
+#ifdef CONFIG_PCIEPORTBUS
+/* this function is needed for PCIE host and device driver. Same
+ * controller can not be programmed as host as well as device. So host
+ * driver must call this function and if this function returns 1 then
+ * only host should add that particular port as RC.
+ * A port to be added as device, one must also add device's information
+ * in plat_devs array defined in this file.
+ * it is the responsibility of calling function to not send port number
+ * greter than max no of controller(3)
+ */
+static int spear1300_pcie_port_is_host(int port)
+{
+	switch (port) {
+	case 0:
+		return 0;
+	case 1:
+		return 1;
+	case 2:
+		return 1;
+	}
+	return -EINVAL;
+}
+#endif
+
 static void __init spear1300_evb_init(void)
 {
 	unsigned int i;
@@ -68,6 +93,12 @@ static void __init spear1300_evb_init(void)
 	/* Register slave devices on the I2C buses */
 	i2c_register_board_devices();
 
+#ifdef CONFIG_PCIEPORTBUS
+	/* Enable PCIE0 clk */
+	enable_pcie0_clk();
+	pcie_init(&spear1300_pcie_port_is_host);
+#endif
+
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
 
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 27ad1a3..e6b00ea 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -299,6 +299,34 @@ struct platform_device spear13xx_rtc_device = {
 	.resource = rtc_resources,
 };
 
+#ifdef CONFIG_PCIEPORTBUS
+/* PCIE0 clock always needs to be enabled if any of the three PCIE port
+ * have to be used. So call this function from the board initilization
+ * file. Ideally , all controller should have been independent from
+ * others with respect to clock.
+ */
+int enable_pcie0_clk(void)
+{
+	struct clk *clk;
+	/*Enable all CLK in CFG registers here only. Idealy only PCIE0
+	 * should have been enabled. But Controler does not work
+	 * properly if PCIE1 and PCIE2's CFG CLK is enabled in stages.
+	 */
+	writel(PCIE0_CFG_VAL | PCIE1_CFG_VAL | PCIE2_CFG_VAL, PCIE_CFG);
+	clk = clk_get_sys("pcie0", NULL);
+	if (!clk) {
+		pr_err("%s:couldn't get clk for pcie0\n", __func__);
+		return -ENODEV;
+	}
+	if (clk_enable(clk)) {
+		pr_err("%s:couldn't enable clk for pcie0\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+#endif
+
 /* Do spear13xx familiy common initialization part here */
 void __init spear13xx_init(void)
 {
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 80f402b..b8e4988 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,6 +12,7 @@ config ARCH_SPEAR13XX
 	bool "SPEAr13XX"
 	select ARM_GIC
 	select CPU_V7
+	select ARCH_SUPPORTS_MSI
 	help
 	  Supports for ARM's SPEAR13XX family
 
-- 
1.7.2.2




More information about the linux-arm-kernel mailing list