[PATCH 2/9] regulators: Fixed errors in ab8500 register mapping

[Bengt Jonsson]

For INTCORE and TVOUT regulators, the low power register bit is
included in the mask so that enable will set the regulator in
normal (high power) mode.

ANAMIC1, ANAMIC2, DMIC regulator settings are swapped with each
other so that the correct regulator gets enabled/disabled.

ANA regulator register address is corrected.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson at stericsson.com>
Acked-by: Linus Walleij <linus.walleij at stericsson.com>
---
 drivers/regulator/ab8500.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 5670775..4efe3cf 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -330,19 +330,19 @@ static struct ab8500_regulator_info ab8500_regulator_info[] = {
 			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 	AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
 			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
-	AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
+	AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x44, 0x4, 0x03, 0x80, 0x38,
 		ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
 
 	/*
 	 * Fixed Voltage LDOs
 	 *		 name,	o/p uV, ctrl bank, ctrl reg, enable, disable
 	 */
-	AB8500_FIXED_LDO(TVOUT,	  2000, 0x03,      0x80,     0x2,    0x2),
+	AB8500_FIXED_LDO(TVOUT,	  2000, 0x03,      0x80,     0x82,    0x2),
 	AB8500_FIXED_LDO(AUDIO,   2000, 0x03,      0x83,     0x2,    0x2),
-	AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x4,    0x4),
-	AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x8,    0x8),
-	AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x10,   0x10),
-	AB8500_FIXED_LDO(ANA,     1200, 0x03,      0x83,     0xc,    0x4),
+	AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x08,    0x08),
+	AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x10,    0x10),
+	AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x04,   0x04),
+	AB8500_FIXED_LDO(ANA,     1200, 0x04,      0x06,     0xc,    0x4),
 };
 
 static inline struct ab8500_regulator_info *find_regulator_info(int id)
-- 
1.7.2.2