Ext3 is supported not well at 2.6.28 for external SD card removal

[Peter Chen]

Dear all,

I find the kernel 2.6.28 is supported ext3 for SD card not well.
The external SD card is formatted with ext3, and when removal from
sd slot, it prints below ext3_abort msg. Such message isn't occurred at
Linux 2.6.23 and 2.6.27.

mmc1: card d555 removed
mmcblk2: error -110 sending read/write command
mmcblk2: error -110 requesting status
end_request: I/O error, dev mmcblk2, sector 1576855
Buffer I/O error on device mmcblk2p1, logical block 197099
lost page write due to I/O error on mmcblk2p1
mmcblk2: error -110 sending read/write command
mmcblk2: error -110 requesting status
end_request: I/O error, dev mmcblk2, sector 1576863
Buffer I/O error on device mmcblk2p1, logical block 197100
lost page write due to I/O error on mmcblk2p1
Aborting journal on device mmcblk2p1.
------------[ cut here ]------------
WARNING: at 
/home/nchen/work/L28EVB/Dev/sirfa5cb_l28_alpha/kernel/fs/buffer.c:1195 
mark_buffer_dirty+0x9c/0xb8()
Modules linked in: sirfsoc_wdt sirfsoc_uspserial g_ether g_usbdrv 
ehci_hcd usbcore snd_soc_cb_modac_ts snd_soc_modac snd_soc_sirfsoc_i2s snd_s
oc_ts_stream_mode snd_soc_sirfsoc snd_soc_core snd_pcm snd_timer snd 
soundcore snd_page_alloc sirfsoc_bl sirfsoc_fb cfbcopyarea cfbimgblt cfbf
illrect
[<c008a8d8>] (dump_stack+0x0/0x14) from [<c009edfc>] 
(warn_on_slowpath+0x4c/0x68)
[<c009edb0>] (warn_on_slowpath+0x0/0x68) from [<c011c1b0>] 
(mark_buffer_dirty+0x9c/0xb8)
  r6:c0ad1000 r5:c0340970 r4:c349b7f0
[<c011c114>] (mark_buffer_dirty+0x0/0xb8) from [<c015b84c>] 
(journal_update_superblock+0xcc/0x14c)
  r5:c3a319c0 r4:c38da000
[<c015b780>] (journal_update_superblock+0x0/0x14c) from [<c015ba84>] 
(__journal_abort_soft+0xc8/0xd8)
  r7:c38da000 r6:fffffffb r5:c3a319c0 r4:c38da000
[<c015b9bc>] (__journal_abort_soft+0x0/0xd8) from [<c015baa4>] 
(journal_abort+0x10/0x14)
  r6:c3493860 r5:fffffffb r4:c349b748
[<c015ba94>] (journal_abort+0x0/0x14) from [<c0158324>] 
(journal_commit_transaction+0xa64/0x14a0)
[<c01578c0>] (journal_commit_transaction+0x0/0x14a0) from [<c015c6d8>] 
(kjournald+0xc4/0x29c)
[<c015c614>] (kjournald+0x0/0x29c) from [<c00b5818>] (kthread+0x54/0x80)
[<c00b57c4>] (kthread+0x0/0x80) from [<c00a1ec8>] (do_exit+0x0/0x818)
  r5:00000000 r4:00000000
---[ end trace 494b15a74f793f7d ]---
mmcblk2: error -110 sending read/write command
mmcblk2: error -110 requesting status
end_request: I/O error, dev mmcblk2, sector 1576855
Buffer I/O error on device mmcblk2p1, logical block 197099
lost page write due to I/O error on mmcblk2p1
journal commit I/O error
ext3_abort called.
EXT3-fs error (device mmcblk2p1): ext3_put_super: Couldn't clean up the 
journal
Remounting filesystem read-only

Besides, I find when system goes to suspend, when we remove sd card 
after the system has already suspended. Then, press wakeup button, the 
system can't wakeup. It sounds happens
deadlock at __fsync_super, which call stack likes below:
mmc_remove_card-->device_del-->mmc_blk_remove-->del_gendisk

Such action is ok at Linux 2.6.23 and 2.6.27. And sd card with vfat at 
2.6.28 is ok.

Does anyone know what happening for ext3 at 2.6.28 ( or from 2.6.28)?
Any solutions for such issue?

Thank you!

-- 
Best regards,
Peter Chen