[PATCH 03/12] iio: adc: Remove redundant error log prints

[Xichao Zhao]

devm_thermal_of_zone_register() prints error log messages when
it fails, so there is no need to print error log messages again.

Signed-off-by: Xichao Zhao <zhao.xichao at vivo.com>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 6b8d6bee1873..3b33480813fe 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -640,12 +640,8 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 		 * Do not fail driver probing when failing to register in
 		 * thermal because no thermal DT node is found.
 		 */
-		if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
-			dev_err(&pdev->dev,
-				"could not register thermal sensor: %ld\n",
-				PTR_ERR(info->tzd));
+		if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV)
 			return PTR_ERR(info->tzd);
-		}
 	}
 
 	ret = devm_iio_device_register(&pdev->dev, indio_dev);
-- 
2.34.1