[PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property

[Neil Armstrong]

On most of the Amlogic SoCs, the first UART controller in the "Everything-Else"
power domain has 128bytes of RX & TX FIFO, so add an optional property to describe
a different FIFO size from the other ports (64bytes).

This adds a property in the bindings, reads the property from the driver and updates
the DT with the new property.

Changes since v2:
- removed spurious blank line from bindings

Changes since v1:
- switched to a more generic "fifo-size"

Neil Armstrong (3):
  dt-bindings: serial: amlogic,meson-uart: add fifo-size property
  tty: serial: meson: retrieve port FIFO size from DT
  arm64: dts: meson: set 128bytes FIFO size on uart A

 .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 +++++
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi                   | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi            | 1 +
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi                    | 1 +
 drivers/tty/serial/meson_uart.c                              | 5 ++++-
 5 files changed, 12 insertions(+), 1 deletion(-)

-- 
2.25.1