[PATCH 2/4] pinctrl: meson-axg: Introduce a pinctrl pinmux ops for Meson-AXG SoC

Neil Armstrong narmstrong at baylibre.com
Fri Nov 17 05:17:58 PST 2017


On 08/11/2017 07:47, Yixun Lan wrote:
> From: Xingyu Chen <xingyu.chen at amlogic.com>
> 
> The pin controller has been updated in the Amlogic Meson AXG series,
> which use continuous 4-bit register to select function for each pin.
> In order to support this, a new pinmux operations "meson_axg_pmx_ops"
> has been added.
> 
> Signed-off-by: Xingyu Chen <xingyu.chen at amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
> ---
>  drivers/pinctrl/meson/Kconfig                 |   3 +
>  drivers/pinctrl/meson/Makefile                |   1 +
>  drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c | 118 ++++++++++++++++++++++++++
>  drivers/pinctrl/meson/pinctrl-meson-axg-pmx.h |  62 ++++++++++++++
>  drivers/pinctrl/meson/pinctrl-meson.h         |   1 +
>  5 files changed, 185 insertions(+)
>  create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
>  create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.h
> 
> diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
> index 1a51778759ea..fe5e6ca88412 100644
> --- a/drivers/pinctrl/meson/Kconfig
> +++ b/drivers/pinctrl/meson/Kconfig
> @@ -38,4 +38,7 @@ config PINCTRL_MESON_GXL
>  config PINCTRL_MESON8_PMX
>  	bool
>  
> +config PINCTRL_MESON_AXG_PMX
> +	bool
> +
>  endif
> diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
> index cbd47bb74549..8de839512677 100644
> --- a/drivers/pinctrl/meson/Makefile
> +++ b/drivers/pinctrl/meson/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o
>  obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o
>  obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o
>  obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o
> +obj-$(CONFIG_PINCTRL_MESON_AXG_PMX) += pinctrl-meson-axg-pmx.o
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
> new file mode 100644
> index 000000000000..e8931d9cf863
> --- /dev/null
> +++ b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
> @@ -0,0 +1,118 @@
> +/*
> + * Second generation of pinmux driver for Amlogic Meson-AXG SoC.
> + *
> + * Copyright (c) 2017 Baylibre SAS.
> + * Author:  Jerome Brunet  <jbrunet at baylibre.com>
> + *
> + * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
> + * Author: Xingyu Chen <xingyu.chen at amlogic.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
> + */
> +
> +/*
> + * This new generation of pinctrl IP is mainly adopted by the
> + * Meson-AXG SoC and later series, which use 4-width continuous
> + * register bit to select the function for each pin.
> + *
> + * The value 0 is always selecting the GPIO mode, while other
> + * values (start from 1) for selecting the function mode.
> + */
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include "pinctrl-meson.h"
> +#include "pinctrl-meson-axg-pmx.h"
> +
> +static int meson_axg_pmx_get_bank(struct meson_pinctrl *pc,
> +			unsigned int pin,
> +			struct meson_pmx_bank **bank)
> +{
> +	int i;
> +	struct meson_axg_pmx_data *pmx = pc->data->pmx_data;
> +
> +	for (i = 0; i < pmx->num_pmx_banks; i++)
> +		if (pin >= pmx->pmx_banks[i].first &&
> +				pin <= pmx->pmx_banks[i].last) {
> +			*bank = &pmx->pmx_banks[i];
> +			return 0;
> +		}
> +
> +	return -EINVAL;
> +}
> +
> +static int meson_pmx_calc_reg_and_offset(struct meson_pmx_bank *bank,
> +			unsigned int pin, unsigned int *reg,
> +			unsigned int *offset)
> +{
> +	int shift;
> +
> +	shift = pin - bank->first;
> +
> +	*reg = bank->reg + (bank->offset + (shift << 2)) / 32;
> +	*offset = (bank->offset + (shift << 2)) % 32;
> +
> +	return 0;
> +}
> +
> +static int meson_axg_pmx_update_function(struct meson_pinctrl *pc,
> +			unsigned int pin, unsigned int func)
> +{
> +	int ret;
> +	int reg;
> +	int offset;
> +	struct meson_pmx_bank *bank;
> +
> +	ret = meson_axg_pmx_get_bank(pc, pin, &bank);
> +	if (ret)
> +		return ret;
> +
> +	meson_pmx_calc_reg_and_offset(bank, pin, &reg, &offset);
> +
> +	ret = regmap_update_bits(pc->reg_mux, reg << 2,
> +		0xf << offset, (func & 0xf) << offset);
> +
> +	return ret;
> +}
> +
> +static int meson_axg_pmx_set_mux(struct pinctrl_dev *pcdev,
> +			unsigned int func_num, unsigned int group_num)
> +{
> +	int i;
> +	int ret;
> +	struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
> +	struct meson_pmx_func *func = &pc->data->funcs[func_num];
> +	struct meson_pmx_group *group = &pc->data->groups[group_num];
> +	struct meson_pmx_axg_data *pmx_data =
> +		(struct meson_pmx_axg_data *)group->data;
> +
> +	dev_dbg(pc->dev, "enable function %s, group %s\n", func->name,
> +		group->name);
> +
> +	for (i = 0; i < group->num_pins; i++) {
> +		ret = meson_axg_pmx_update_function(pc, group->pins[i],
> +			pmx_data->func);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int meson_axg_pmx_request_gpio(struct pinctrl_dev *pcdev,
> +			struct pinctrl_gpio_range *range, unsigned int offset)
> +{
> +	struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
> +
> +	return meson_axg_pmx_update_function(pc, offset, 0);
> +}
> +
> +const struct pinmux_ops meson_axg_pmx_ops = {
> +	.set_mux = meson_axg_pmx_set_mux,
> +	.get_functions_count = meson_pmx_get_funcs_count,
> +	.get_function_name = meson_pmx_get_func_name,
> +	.get_function_groups = meson_pmx_get_groups,
> +	.gpio_request_enable = meson_axg_pmx_request_gpio,
> +};
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.h b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.h
> new file mode 100644
> index 000000000000..8ff88bf2e849
> --- /dev/null
> +++ b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.h
> @@ -0,0 +1,62 @@
> +/*
> + * Copyright (c) 2017 Baylibre SAS.
> + * Author:  Jerome Brunet  <jbrunet at baylibre.com>
> + *
> + * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
> + * Author: Xingyu Chen <xingyu.chen at amlogic.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
> + */
> +
> +struct meson_pmx_bank {
> +	const char *name;
> +	unsigned int first;
> +	unsigned int last;
> +	unsigned int reg;
> +	unsigned int offset;
> +};
> +
> +struct meson_axg_pmx_data {
> +	struct meson_pmx_bank *pmx_banks;
> +	unsigned int num_pmx_banks;
> +};
> +
> +#define BANK_PMX(n, f, l, r, o)				\
> +	{							\
> +		.name   = n,					\
> +		.first	= f,					\
> +		.last	= l,					\
> +		.reg	= r,					\
> +		.offset = o,					\
> +	}
> +
> +struct meson_pmx_axg_data {
> +        unsigned int func;
> +};
> +
> +#define PMX_DATA(f)							\
> +	{								\
> +		.func = f,						\
> +	}
> +
> +#define GROUP(grp, f)							\
> +	{								\
> +		.name = #grp,						\
> +		.pins = grp ## _pins,                                   \
> +		.num_pins = ARRAY_SIZE(grp ## _pins),			\
> +		.data = (const struct meson_pmx_axg_data[]){		\
> +			PMX_DATA(f),					\
> +		},							\
> +	}
> +
> +#define GPIO_GROUP(gpio)						\
> +	{								\
> +		.name = #gpio,						\
> +		.pins = (const unsigned int[]){ gpio },			\
> +		.num_pins = 1,						\
> +		.data = (const struct meson_pmx_axg_data[]){		\
> +			PMX_DATA(0),					\
> +		},							\
> +	}
> +
> +extern const struct pinmux_ops meson_axg_pmx_ops;
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
> index 183b6e471635..12a391109329 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.h
> +++ b/drivers/pinctrl/meson/pinctrl-meson.h
> @@ -108,6 +108,7 @@ struct meson_pinctrl_data {
>  	struct meson_bank *banks;
>  	unsigned int num_banks;
>  	const struct pinmux_ops *pmx_ops;
> +	void *pmx_data;
>  };
>  
>  struct meson_pinctrl {
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-amlogic mailing list